Latest filing box Tenders | Government filing box Tenders

CTN :42880559

04 Dec, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of marking device , screw driver set , anti fogg for lense , air seal packets type 01 , air seal packet type 02 , air seal packet type 03

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

Central Government/Public Sector

CTN :42952886

08 Dec, 2025 1.90 Lacs

Purba Medinipur - West Bengal

Tender For supply of brush steel wire , petrolleum jelly , cloth coated pvc , boric powder , bleaching powder stabilised , silicon cartridge water proof , rope polypropylene 16mm , rope polypropylene 6mm , rope polypropylene 4mm , rope polypropylene 20mm , solder lead , coaxial cable rg11 isi mark , dry chemical pdr , detergent solution , lip seal for fire hydrant , jubilee clip 1 , 9 volt battery , lint free baniyan cloth , fluorescent tape for night marking of emergency ways lifebuoys , twine sewing fine , stretch packing polythene sheet on handle core 15cm width 20 mtrs roll , rubber latex long gloves , refrigerant gas r 404a , poly vinyl acetate dispersion based adhesive is 4835 , silicon sealant compound 300ml , paint roller refill 9 , funnel 5 , paint roller refil 6 , rope polypropylene 12mm , rope polypropylene 10mm , face mask , fluorescent tape yellow 4 , desoldering wire , soldering flux , heat shrink sleeve , cable casing , wire connection lugs , rj 45 connection , fender coir turk head , paint roller refil 4 , anti corosive compound , instant glue , o ring cord , envelope size 4x10 , photocopier paper 210mm x 297mm , refill for automatic air freshener 250ml , doormat foot mat mat floor synthetic , quick dry steel putty , wet surface putty , m seal , varnish , distemper white isi mark ) /bid number : gem/2025/b/6939822 * /dated: 27-11-2025 & & / bid document 1 / 37

Central Government/Public Sector

CTN :42606016

15 Dec, 2025 NA

Goa - Goa

Tender For corrigendum : supply of magnetic compass - ta sl no 4 1 1 1 transmitting type magnetic compass with electrical transmission , ta sl no 4 1 1 2 magnetic compass binnacle , ta sl no 4 1 1 3 rim ring with two bearings mounted , ta sl no 4 1 1 4 hood without aperture with handles , ta sl no 4 1 1 5 main electric light with suitable cable type of 3 1 5 sq , ta sl no 4 1 1 6 emergency electric light with suitable cable type of 3 1 5 sq , ta sl no 4 1 1 7 junction box with 5 pole terminal strip for compass light , ta sl no 4 1 1 8 fastening material comprising of 4 bolts of brass m16 4 washers and 4 nuts with flange , ta sl no 4 1 1 9 1 lenses and mounting individually adjusted to an optimum value according to the length of thr reflection tube , ta sl no 4 1 1 9 2 reflection tube 140mm dia with flange one gasket , ta sl no 4 1 1 9 3 removable flange to seal the hole in the deck or ceiling from below , ta sl no 4 1 1 9 4 locking device for the telesc opic mirror head wheel house unit , ta sl no 4 1 1 9 5 wheelhouse unit with day and night mirror , ta sl no 4 1 1 10 six bar magnets 200 mm long 10 mm dia for b c correction , ta sl no 4 1 1 11 two full size d spheres of soft iron with marking fastening bolts m16 with washers and nuts of brass , ta sl no 4 1 1 12 one heeling magnet in tube with marked chain active length 175 mm one magnet 125mm one magnet 50 mrn long , ta sl no 4 1 1 13 reflector compass with compass card dia 180 mm with directional system , ta sl no 4 1 1 14 standard azimuth device with vanes and black hinged mirror , ta sl no 4 1 1 15 1 brackets of coated brass with fastening bolts nuts and washers , ta sl no 4 1 1 15 2 flinders tube brass , ta sl no 4 1 1 15 3 plastic cover for flinders tube , ta sl no 4 1 1 15 4 soft iron core 305 mm length , ta sl no 4 1 1 15 5 soft iron core 152 mm length , ta sl no 4 1 1 15 6 soft iron core 76 mm length , ta sl no 4 1 1 15 7 soft iron core 38 mm length , ta sl no 4 1 1 15 8 wooden core 280mm length , ta sl no 4 1 1 15 9 wooden core 140mm length , ta sl no 4 1 1 15 10 wooden core 70mm length , ta sl no 4 1 1 15 11 wooden core 35mm length , ta sl no 4 1 1 16 magnetic compass repeaters , ta sl no 4 1 1 17 junction box converter box other accessories including cables required for interfacing with ships degaussing system , ta sl no 4 1 1 18 nmea booster splitter convertors for transmission of heading information , ta sl no 4 1 1 19 interconnecting cables , ta sl no 4 1 1 20 interface resistor box attenuator for interfacing with rs degaussing system , ta sl no 4 1 1 21 proving of the interface between rs degaussing system and magnetic compass during hats and sats , ta sl no 4 1 6 on board spares , ta sl no 4 1 3 and 5 14 services of engineers and training , ta sl no 4 1 4 and 5 13 12 drawings and documentation

State Government

CTN :42756382

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of gym for strength and conditioning equipment - weight lifting bar women, weightlifting training bar women length 2010 mm.weight 15 kg ,grip surface chrome bearings and bushings needle bearings grip marking weightlifting flange width 30 mm . knurling 1.2mm - training dustproof seal.sleeve diameter 50 mmloadable sleeve length 320 mm .finish: black oxide coating for corrosion resistance, lighter weight: makes it easier for female lifters to learn and progress in olympic weightlifting, especially those new to the sport or recovering from injuries.shorter length: more suited to the average female physique, allowing for proper technique and form when performing lifts like snatches and cleans.warranty 10-12 yearsrequired certificates : international weightlifting federation/ indian weightlifting federation

State Government

CTN :42756415

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of gym for strength and conditioning equipment - weight lifting bar men pac, weightlifting training bar men length 2200 mmweight 20 kggrip surface chrome sleeve diameter 50 mm . loadable sleeve length 415 mm /.flange width 30 mm. bearings and bushings needle bearings grip marking weightlifting knurling 1.2mm - training dustproof seal ,precise needle bearings: ensures smooth rotation at all loads for a consistent lifting experience.durable construction: made from high-quality steel for lasting performance. warranty 10-12 yearsrequired certificates : international weightlifting federation/ indian weightlifting federation

Filing Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government