Latest filter pad Tenders | Government filter pad Tenders

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Central Government/Public Sector

CTN :40361784

06 Jun, 2025 NA

Surat - Gujarat

Tender For supply of filter (attapulgus) clay

CTN :40033368

24 May, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : procurement of filter clay

CTN :40316205

03 Jun, 2025 NA

Barsingsar - Rajasthan

Tender For supply of mandaroty & optional spare material for 220 kv sf6 breaker operating mechanism and pole overhauling - control valve seat , darina grease (1 pkt = 250) , anabond/silastic 1080 (1pkt = 100 gm) , emery pad , set of circlips & dowelpins , set of spring (trip latch & antipumping lever) , holding latch bearing , bearing for barpin where holding latch gets latch , al. pipe o ring iap 80 , operation counter , o-ring iap 90 , air reservoir o ring , drain valve , check valve (nrv) , safety valve , capseal with o ring , air pressure switch with coupling , trip latch , air pressure gauge, compressor belt a-52 , compressor tune-up kit (ir make compressor) , compressor oil , thermostate , close coil 220 vdc , trip coil 220 vdc , 7 no + 2 nc dc contactor , 5 no + 4 nc dc contactor , motor contactor 415 vac , overload relay 4 to 6 amp , mcb 4 pole 415vac , mcb 2 pole 250 vac , space heater 250 w , lr switch 7 pole , tnc switch 4 pole , gas pressure gauge , o ring p 7 , o ring p 18 , filter pads for louvers , shock absorber oil , chemistic , o-ring iap 44 , gas density switch q6 , hardware set, o ring p 260 , o ring p 170 , absorbent , etna seal set , oring p 40 , micro carbon grease (50 gm) , jointal z (10 gms) , anabond/silastic 1080 (100 gm) , , close coil assembly, 220 vdc , trip coil assembly, 220 vdc , window glass with gasket , control valve assembly , shock absorber assembly , pole discrepancy relay , auxiliary switch assembly (std), stationary main contact , stationary arc contact , moving main contact , moving arc contact with guide , insulating pull rod assembly without rod end , puffer cylinder assembly with contacts & nozzle , sf6 gas valve , intermediate flange , slide seal flange , lt flange , hardware set , control valve assembly , sf6 gas for top up , sf6 top up device with suitable connector for breaker, male and female cylinder option and dilo machine

Co-operative

CTN :40286533

19 May, 2025 51.0 Thousand

Mehsana - Gujarat

Tender For supply of rubber foot mat, nylon filter pad and teflon hammer,

Central Government/Public Sector

CTN :40140585

17 May, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of title - supply and commissioning of black body infrared thermometer calibrator,technical specification as per annexure attached, make/brand- iqnet orsimilar , super plastic body floor standing with integral caster wheels mosquitobreeding proof desert cooler. with suitable stand. voltage 230 volts, 50 hzac. (1) nominal air capacity -4000 cubic meter per hour.(2) powerconsumption ? 280 watt. (3)is:3315 latest.(4)sump tank capacity 80 ltr. (5)fan size 450mm.(6) fan motor rpm 1400. fan motor is:996, (6) filter padshoneycomb pads.(7) warranty 1 year. make- maharaja, crompton,symphony, bajaj material shall be supplied with oem-test report , supply of plastic body desert cooler, honeycomb pads floor standing withintegral castor wheels brand: bajaj,usha, symphony, havells (detaileddescription/specification as per product # 1 of gem contract no. gemc511687767781349 dt.13/06/2024) , refrigerator, double door, frost free, 310 liters of m/s samsung/lgconfirming to rcf specification no. edts-118, rev. e suitable for lhb typehot buffet cars , blower motor unit (without outer case) for electrical chimney suitable frolhb pantry car, impeller & motor dynamically balanced & ready to usehaving following technical specification: icf/elect/898, cs-2, type of blower:centrifugal single inlet single width blower, size 7 inch x 3.5 inch, motor type:external rotor, supply- 230 vac, 0.9a, 160w, 1400 rpm, air volume 600cmh, capacitor 6.3 mfd, class f insulation, forward curve impeller. materialshall be southern magnetic or rotech or sem , provision of water purifire 20lit/hr capacity , water purifier ro purification, production rate per hour minimum 20 liters,tank capacity minimum 9 liters, warranty minimum 12 months. make/brandkent or havells or live pure. specification as per attached annexure , reverse osmosis water treatment system 20 lph (with 09 ltr. tank capacityapprox) , supply installation & commissioning of compressor similar to model nokcm522cal-e510h make emerson copeland suitable for air drier makekirloskar along with refilling of refrigerant gas r404a.

Filter Pad Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Co-operative

Central Government/Public Sector