Get complete information related to latest Finishing Work Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Finishing Work Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Finishing Work Tenders.
Tender For construction of security barrack at mohuldih mines - clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent , diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration , earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil. , filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size , providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand , half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand , centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete , centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform , steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal , 15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic , 12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for
Tender For tender for supply of carefully removing the veneering wall etc. , after proper documentation bringing them down at a height of 2.50 mtr , stocking for reuse , erecting and removing of supports at down properly etc. , complete. , carefully removal of core filling in between stone masonry veneer wall and stacking the useful materials and conveyance of debris to a far away from the monument premises , etc.complete , excavation/scientific clearance of earth deposit to retrieve fallen architectural stone elements and to expose the buried plinth and original floor & drainage system , including stacking useful stones and disposing of the excavated earth after proper screening outside the temple complex , etc.complete. , carefully resetting the old available veneer stone and new stone in original position in lime mortar 1in2 including necessary pointing the stone joints in same mortar with suitable colour oxides , curing , as per the standard specifications and as directed etc. complete. , construction of brick work for corefilling and in the edges with country bricks specially made as per requirement in lime mortar 1in2 , curing etc. , complete. , providing apron and pathwaty using new stone flooring slabs of size 1.20m to 0.90m in length 0.60m to 0.45m in breadth and 3inch to 4inch thick properly dressing as per the old available clues setting in lime mortar 1in1.5 above the foundation concerete and pointing the stone joints with lime mortar 1in2 curing etc.complete. , supplying and making of new veneer stone with good quality of new stones properly dressing all sides and architectural designs as per the available clues in the place of damaged and missing members etc.complete. , disposal of waste and unserviceable materials outside temple premises , stacking the stone members and leveling the undulated area , etc.complete. 1.disposal of building rubbish or malba or similar unserviceable , dismantled or waste materials 100 cum 2. removal and stacking of store members 75 cum 3. for leveling the area-creation of parking space approximately size of 80m x 6m x 0.50m 240 cum
Tender For supply of r polypropylene random copolymer pipes 32 mm outer dia isi marked pn 16 sdr 7.4 uv stabilised and anti microbial fusion , all as per item no 20.00 here in before but of size 25 mm bore. , supply and fixing sluice valve flanged type 80 mm bore isi marked as per is 14846 2000 with valid cmlno. batch no. and manufacturer serial no. class pn 1.6 with brass spindle , all as per item no 22.00 here in before but of size 100 mm bore of pipe . , all as per item no 22.00 here in before but of size 150 mm bore of pipe . , all as per item no 22.00 here in before but of size 200 mm bore of pipe . , material and labour for ductile iron fittings for spigot socket ductile iron pipes such as bends any type radius and angle taper any type , supply and fixing cast iron air released valve with two air outlet is 14845 2000 dk fig 4 and fixing up in water main of 150 mm , construction of brick masonry valve pit of size 0.9m x 0.9m x 0.9m depth internal dimension , construction of brick masonry valve pit of size 1.20m x 1.20m x 0.9m depth internal dimension , m l for cement concrete 1 4 8 type d 2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition complete all as specified , m l for cement concrete 1 2 4 type b 0 using 12.5mm graded crushed stone aggregate as in coping of brick masonary including , m l for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m , m l for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar 1 4 complete all as specified and directed. , supply and fixing of gm globe gate valve suitable for 50 mm bore pipe with iron wheel head screwed both ends for iron ppr pipes isi marked , all as per item no 33.00 here in before but suitable for 40 mm bore pipe. , all as per item no 33.00 here in before but suitable for 25 mm bore pipe. , all as per item no 33.00 here in before but suitable for 20 mm bore pipe. , s f for straight plain brass ferrules or connecting screws screwed bolt ends of 20 mm bore pipe complete all as directed , all as per item no 37.00 here in before but of sizer 25 mm bore , returning filling in including spreading leveling watering well ramming in layers n. exc 25 cm thick complete all as directed. , removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. , wrecking crow bar or claw bar as per is 706 (q3)
Tender For a/r & m/o works to gpra qtrs. sc-404 at sector-3, pushp vihar, new delhi during 2025-26. (sh:- providing and fixing wall tiles, floor tiles, frp sheet, wc and other miscellaneousllaneous finishingworks allotted qtrs.subwork/packages:sh:- providing and fixing wall tiles, floor tiles, frp sheet, wc and other miscellaneousllaneous finishingworks allotted qtrs.
Tender For a/r & m/o to various residential quarters at sector-iv, spg quarters pushp vihar, m.b. road new delhi dg. 2025-26. (sh:- internal finishingworks and miscellaneous work).subwork/packages:sh:- internal finishingworks and miscellaneous work).
Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia