Latest fire hose scrap Tenders | Government fire hose scrap Tenders

corporations/Associations/Others

CTN :40491670

17 Jun, 2025 NA

Cuddalore - Tamil Nadu

Tender For supply of 1. thermoplastic hose 2-meters long with m 18 x 1.5 swivel nut , 2. quick connect coupler-model: qc 7c.

CTN :40478194

16 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of nozzle standard duty , nozzle heavy duty , hose pipe standard duty - 4mtr , hose pipe heavy duty - 4mtr , nozzle spout 3 by 4 inch , nozzle spout 1 inch , nozzle flap , shear valve , swivel joint 3 by 4 inch , swivel joint 1 inch , breakway coupling 3 by 4 inch , breakway coupling 1 inch , vrs co-axial hose , vapour recovery nozzle , vrs nozzle flap , vrs nozzle spout , break-away coupling co-axial , al regulator

CTN :40500538

11 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of high pressure rubber hose pipe suitable for working pressure of 20 kg and having embeded steel wire braiding for main pipe to air dryer to vcb/abcb,size : o/d=17. 5 mm, i/d=8.0 mm & length = 254 mm with 3/8" metallic swivel nut at both ends. to specn. drg.no. rubber hose conform to sae 100r1 and metallic nuts should conform to is-2062 -2011, (grade e 250 br)gi coated. [ warranty period: 30 months after the date of delivery ]

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

Central Government/Public Sector

CTN :40475488

17 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For supply of heavy duty grease pump with grease gun having in line flow meter as per specification (1) grease gunhand operated, (2) grease drum capacit y 15 kg., (3) wheel for easy moving, (4) digital oval gear type meter, (5)grease flow 0.1 kg. to 2.5 kg./min., (6) maximum working pressure 7500 psi, (7) gre ase discharge upto 9 gm/stroke,(8) wire braided grease delivery hose (length minimum 2.0 metre) having swivel connector assembly at both end. (9)accura cy plus minus 3 percent, (10) unit of measurement-kg/gm/lbs, (11) battery 2 nos. of 1.5 v. make/brand :skf / groz / elgi/ ingersoll rand only. [ warra nty period: 30 months after the date of delivery ]

CTN :40359242

22 May, 2025 5.01 Lacs

Ganganagar - Rajasthan

Tender For supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white, density-128/m3

CTN :40174387

03 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : e tender for supply, erection, testing, commissioning and completeness of kitchen equipment works for fintech tower food court at fintech city in nandambakkam village, alandur tk, chennai dt - air curtain, euronics - eas 4 (1200 x 230 x 212)(for specifications refer the tender documents), euronics - eas 5 (1500 x 230 x 212)(for specifications refer the tender documents), euronics - eas 6 (1800 x 230 x 212)(for specifications refer the tender documents), s.s drain trough with grating, s.s drain trough with grating - (1050 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (1200 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (1200 x 600 x 150)(for specifications refer the tender documents), s.s drain trough with grating - (1500 x 300 x 150)(for specifications refer the tender documents), s.s drain trough with grating - (1500 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (1650+1650 x 200 x 150)(for specifications refer the tender documents), s.s drain trough with grating - (2500 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (2600 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (300 x 300 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (500 x 500 x 75)(for specifications refer the tender documents), s.s drain trough with grating - (550 x 550 x 75)(for specifications refer the tender documents), knee operated hand wash sink, knee operated hand wash sink - (420 x 400 x 512)(for specifications refer the tender documents), garbage sorting table with sink, garbage chute and space for garbage bin, garbage sorting table with sink, garbage chute and space for garbage bin - (1800 x 700 x 850+150)(for specifications refer the tender documents), deck mounted swivel type mixerfaucet, deck mounted swivel type mixer faucet - (298 x 257 x 205)(for specifications refer the tender documents), round mobile s.s garbage bin, round mobile s.s garbage bin - (dia. 450 x ht. 760)(for specifications refer the tender documents), pot rinser, pot rinser - (321 x 425 x 306)(for specifications refer the tender documents), flushing hose reel with swing bracket, flushing hose reel with swing bracket - (162 x 527 x 498)(for specifications refer the tender documents), sherdder with dewatering machine, sherdder with dewatering machine - (1800 x 550 x 1640)(for specifications refer the tender documents), digester, digester - (1476 x 870 x 1261)(for specifications refer the tender documents), garbage bin - yellow, garbage bin - yellow - (580 x 720 x 1070)(for specifications refer the tender documents), garbage bin - red, garbage bin - red - (580 x 720 x 1070)(for specifications refer the tender documents), garbage bin - green, garbage bin - green - (580 x 720 x 1070)(for specifications refer the tender documents), five tier storage rack shelve, five tier storage rack shelve - (1060 x 530 x 1800)(for specifications refer the tender documents), five tier storage rack shelve - (914 x 530 x 1800)(for specifications refer the tender documents), dunnage rack, dunnage rack - (900 x 610 x 300)(for specifications refer the tender documents), dunnage rack - (1220 x 610 x 300)(for specifications refer the tender documents), mobile garbage bin (70 ltrs), mobile garbage bin (70 ltrs) - (582 x 420 x 790)(for specifications refer the tender documents), mobile garbage sorting table with garbage chute & space for garbage bin, mobile garbage sorting table with garbage chute & space for garbage bin - (1500 x 900 x 850)(for specifications refer the tender documents), walk in garbage chiller (+4 c), walk in garbage chiller (+4 c) - (2400 x 4450 x 2650)(for specifications refer the tender documents), s.s drain trough with linear grating, s.s drain trough with linera grating - (200 x 200 x 75) +slot 1000(for spec

Central Government/Public Sector

CTN :40419847

11 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of hose assembly water inlet vent. includes swivel fittings .9579999/17051113. as per drg.no. 9579999/17051113. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40411340

02 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For high pressure rubber hose pipe for working pressure of 20 kg/cm2 and having embedded ste el wire confirming to ls 226 gi coated and rubber hose confirming to sae-100r1 having od 17.5 mm, id 10 mm and length 1000mm with 3/8" swivel nut at both ends. the metallic nut should confirm to ls 226 gi coa ted. note: l) this item is reserved for supply by source in ireps vendor directory only as per clw ltem id: 2 100901 2) one sample to be got approved before effecting bulk supply [ warranty period: 30 months aft er the date of delivery ]

Central Government / Public Sector

CTN :40412011

10 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of rubber hose type sae100r1 size 3/4 inch male x 2000 mm long with1/2 inch male x 1/2 inch female bsp swivel end cone type end fittings with 1 no.elbow male type confirming to is: 2062 with zinc coating(white). [ warranty period: 30 months after the date of deli very ]

Fire Hose Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector