Latest fire hoses Tenders | Government fire hoses Tenders

State Government

CTN :36335368

01 Jul, 2024 NA

Sundernagar - Himachal Pradesh

Tender For supply of procurement of various tools valves gas welding equipmentand jacks etc - welding hose pipe half inch , cutting torch or nozzle ,oxygen gas regulator , acetylene gas regulator , pipewrench 24 inch , pipe wrench 18 inch , pipe wrench 12 inch , non return valve 6 inch , gate valve 3 inch , gate valve 4inch , gate valve 6 inch , portable welding set 200kva , 20ton capacity hydraulic wedge jack

Central Government/Public Sector

CTN :36309815

21 Jun, 2024 NA

Bishrampur - Chhattisgarh

Tender For supply of gas cuttozen set , oxygen pressure regulator , acetylene pressure regulator , rubber hose isi mark blue for oxygen id 8mm , rubber hose isi mark red id 8mm , cutting nozel 1 by16 inch , cutting nozel 3 by64 inch , welding glass black for welding screen , welding holder or electrode holder 600 amp , welding glass white for welding screen

CTN :36187896

10 Jun, 2024 NA

Jaipur - Rajasthan

Tender For bid to ras amc of ffe at mdpl rajasthan locations - servicing of fe, dcp, 5_9_10 kg_ at jrps , servicing of fe, dcp,75kg_ at jrps , servicing of fe, ca_abc_co2 at jrps , painting fe, co2,2_4.5_6.8 kg at jrps , painting of fe, dcp 5_9_10kg at jrps , painting of fe, dcp,25_50_75kg at jrps , refilling cartridge,dcp,5_9_10kg at jrps , refilling and hpt of scaba set at jrps , hpt and utm fe-9_10 kg dcp ext at jrps , hpt and utm fe, dcp,25_50_75kg at jrps , hpt and utm-2_4.5_6.8 kg co2 ext. at jrps , hptand utm-2.0 kg clean ag.ext. at jrps , hydrotesting of fire hose at jrps , servicing of fire hose box at jrps , maintenance of foam trolley at jrps , wind socks, double linen cloth waterproof at jrps , fttg - oring in valvemonitorsandhydrant p , supply and filling dcp powder at jrps , fire hose box glass at jrps , beading rubber,f_hose box at jrps , hose rubber,co2 fe,4.5 and 6.5kg , supply of discharge hoseandnozzle, fe, dcp, 25_50_75kg at jrps , supplydisc.hoseplusnozzle dcp 9_10kg at jrps , supply and fixing of safety clip at jrps , plunger dcpfe at jrps , replacement of brass valve f_gas cylinde at jrps , supply and fixing dcp cap washer at jrps , servicing9_10 kg dcp ext. at aspl , refilling cartridge,dcp,5_9_10kg at aspl , hpt and utm-9_10 kg dcp ext. at aspl , hpt and utm-2_4.5_6.8 kg co2 ext. at aspl , hptand utm-2.0 kg clean ag.ext. at aspl , painting of fe, dcp 5_9_10kg at aspl , painting fe, co2,2_4.5_6.8 kg at aspl , hydrotesting-fire hoses at aspl , supply-disc.hoseplusnozzle dcp 9_10kg at aspl , supply- dcp powder at aspl , supply of saftey shoes 6-11 no at aspl , safety goggles,cup , supply safety googles at aspl , supply of hand gloves at aspl , supply and fixing dcp cap washer at aspl , sply fire buckets-9 ltr at aspl , supply fire fighting hoses at aspl , fire hose box glass at aspl , supply and fixing of safety clip at aspl , supply of face labels at aspl , wind socks, double linen cloth waterproof at aspl , sup. of co2 cart. for 9 kg dcp at aspl , servicing of fe, ca_abc_co2 at aspl , servicing of fe, dcp,75kg_ at aips , servicing of fe, dcp, 9_10 kg_ at aips , servicing of fe, ca_abc_co2 at aips , servicing of breathing apparatus at aips , hptand utm-2.0 kg clean ag.ext. at aips , refilling cartridge,dcp,5_9_10kg at aips , refilling and hpt of scaba set at aips , hpt and utm fe-9_10 kg dcp ext at aips , hpt and utm fe, dcp,25_50_75kg at aips , painting of fe, dcp 9_10kg at aips , painting of fe, dcp,25_50_75kg at aips , painting fe, co2,2_4.5_6.8 kg at aips , hpt and utm-2_4.5_6.8 kg co2 ext. at aips , hydrotesting of fire hose at aips , supplydisc.hoseplusnozzle dcp 9_10kg at aips , supply of discharge hoseandnozzle, fe, dcp, 25_50_75kg at aips , hose rubber,co2 fe,4.5_6.5kg , supply and fixing dcp cap washer at aips , supply and fixing of safety clip at aips , ring and pin at aips , sply -fire buckets-9 ltr at aips , wind socks, double linen cloth waterproof at aips , sticker at aips , supply and filling dcp powder at aips , servicing of fe, dcp,5_9_10kg at arps , servicing of fe, dcp,75kg at arps , refilling cartridge,dcp,75kg at arps , refilling cartridge,dcp,5_9_10kg at arps , hpt and utm fe, dcp,25_50_75kg at arps , hpt and utm fe5_9_10 kg dcp ext at arps , hpt and utm-2_4.5_6.8 kg co2 ext. at arps , hptand utm-2.0 kg clean ag.ext. at arps , painting of fe, dcp 5_9_10kg at arps , painting of fe, dcp,25_50_75kg at arps , painting fe, co2,2_4.5_6.8 kg at arps , supply-disc.hoseplusnozzle dcp 9_10kg at arps , supply of discharge hoseandnozzle, fe, dcp, 25_50_75kg at arps , ring and pin at arps , supply and fixing dcp cap washer at arps , supply and fixing of safety clip at arps , splyandfixing gun metal cap, dcp at arps , supply and filling dcp at arps , supply - fire fighting hoses at arps , hydrotesting of fire hose at arps , refilling and hpt scaba set at arps , servicing of fe, ca_abc_co2 at arps , servicing breathing apparatus at arps , wind socks, double linen cloth waterproof at arps , sply and fixg of

CTN :36309489

27 Jun, 2024 NA

Kargil - Jammu And Kashmir

Tender For supply of gas cutting torch esab cutogen 5 per nm250 , gas welding lighter spark lihter , grinding wheel 150 x 25 x 31.75 mm fine , hose clamp 1 inch , hose clamp 2 inch , hose clamp 3 inch , hose clamp 4 inch , hose clamp 5 inch , hose clamp 6 inch , pbs roll roof leakage protection sheet 20 mtr roll , welding holder , battery wire heavy duty positive , battery wire heavy duty negitive , electrical wire thimble alluminum 100mm 120mm 150mm 160mm 200mm 250mm each 25 nos , electrical wire thimble copper md fc rc fis fs ms fb bc , battery crocodile clip , teflon tape , anabond 85 gms , brass brazing flux esab , tape and die set 10 x 1.25 mm , hss jobber drill set 1 to 13 mm miranda , soldering paste or flux 50 gms , fevi quick 20 gms , double stage acetylene gas pressure regulator esab , double stage oxygen gas pressure regulator esab , welding cable light weight , gas prssure gauge for cylinder checking , hacksaw blade 1 inch , hand gloves for welder , ms sheet 8ftx4ftx1mm , ms sheet 8ftx4ftx2mm , ms sheet 8ftx4ftx3mm , ms sheet 8ftx4ftx6mm , ms sheet 8ftx4ftx12mm , l t wire 1.5 sq mm finolex , l t wire 2 sq mm finolex , l t wire 3 sq mm finolex , l t wire 4 sq mm finolex , l t wire 6 sq mm finolex , insulation tape , cotton tape , soldering led , grinding past 100gm , soldering wire , fiber washer different type 6mm to 11mm , heat shrink tape , high temperature cloth , m seal 90 gms , araldite 90 gms , packing sheet , nut and bolt 10mm to 24mm , cotton waste , feed pump kit , cutting wheel 4 inch , cutting wheel 12 inch , grinding wheel for hand grinder , ms welding rod 2.15mm 6013 , ms welding rod 3.15mm 6013 , ms welding rod 4 mm 6013 , 7016 weding rod 4 mm , welding glass black , welding glass white , gas welding googles blue and white , tap dia 22 x 2 , drill bit 17mm , lath machine oil servo grade 32 , coolant for lath machine cutting oil , drill bit size 02 mm to 12 mm , drill bit size 1.5 mm to12.5mm , bench grinder wheel smooth size 150x20x32 , bench grinder wheel fine size 150x20x32 , bench grinder wheel rough size 150x20x32 , needel file set , carbite tips tool boring , carbite tips tool v tool , carbite tips tool turning tool , steel scale 24 inch , hexagonal rod 19mm , hexagonal rod 22mm , hexagonal rod 24mm , hexagonal rod 27mm , letter punch , number punch , tape dia 6 to 24mm set , hss dril bit 16mm , hss dril bit 18mm , hss dril bit 20mm , hss dril bit 22mm , hss dril bit 24mm , tap dia 8x1.25mm , tap dia 10x1.5mm , tap dia 12x1.25mm , tap dia 12x1.5mm , tap dia 12x1.75mm , tap dia 14x1.5mm , tap dia 16x1.75mm , miranda s 500 white bit size 1.5 inch to 6 inch , hacksaw frame

Central Government / Public Sector

CTN :36311549

25 Jun, 2024 NA

Bhubaneswar - Odisha

Tender For supply of rubber hose for oxy acetylene welding & cutting with braided textile reinforcement in red colo ur, size: 8 mm x 7.5 mtr in length to drawing / specification is:447/1988(reaffirmed -2018). [ warranty period: 30 months after the date of delivery ]

CTN :36286557

24 Jun, 2024 NA

Darjeeling - West Bengal

Tender For supply of jcb 3dx super joint knuckle swivel , jcb 3dx super bucket tooth adapter , jcb 3dx super buket tooth nut and bolt , jcb 3dx super hand throttle with cable , jcb 3dx super horn 12v , jcb 3dx super hvy duty skt set 3 by4 inches , jcb 3dx super hvy duty rachid , jcb 3dx super jcb front tube , jcb 3dx super jcb rear tube , jcb 3dx super air line , jcb 3dx super front universal joint , jcb 3dx super tie rod , ex 70 teeth locking pin , ex 70 hydraulic adapter 46mm , ex 70 rock breaker hose , ex 70 oxygen and acetylene gas cutter set , spider excavator fuel filter , spider excavator fuel water separator , spider excavator oil filter

CTN :36284002

22 Jun, 2024 NA

Kalyani - West Bengal

Tender For supply of apron (asbestos) , required for shop floor all welders. make-esab/ador/substantially equivalent. dura ap , hose pipe 1/4" (8 mm) bore (red) , required for shop floor oxy acetylene torch. , hose pipe 1/4" (8 mm) bore (black) , required for shop floor oxy acetylene torch.

CTN :36286766

11 Jun, 2024 NA

Nalgonda-T - Telangana

Tender For supply of fire fighting equipment to vvspl and vdpl - supply of 75kg dcp fire extinguishers suryapet , supply oful listed water cum foam monitors 500 750 gpmrajahmundry , supply of mefg of 40 x rajahmundry ,supply of ul listed foam making branches rajahmundry ,supply of 9 kg dcp fire extinguiher dharmapuri , supply ofco2 fire extinguisher dharmapuri , supply of hydrant hosesdharmapuri , supply of 75 kg dcp fire extinguishers kadapa , supply of water cum foam monitors kadapa ,supply of fire hoses 63mm x 15 m kadapa , supply of 9 kgdcp fire extinguishers kadapa , supply of ul listed of foammonitors 500 750 gpm jk gudem , supply of 9 kg dcp fireextinguishers vizag , supply of 6.8 kg co2 fireextinguishers vizag , supply of 75 kg dcp fire extinguishersvizag , supply of ul listed foam monitors 500 750 gpmvizag

CTN :36259050

06 Jun, 2024 63.0 Thousand

Cuddalore - Tamil Nadu

Tender For purchase of welding equipment - purchase of easb make welding equipmentsnote : compulsay attached test, quarantee / performance certificate, cuttogen no5 cutting torch, cutting nozzle for using with lpg size: 1/32 ", cutting nozzle for using with lpg size: 3/64 ", cutting nozzle for using with lpg size: 1/16 ", cutting nozzle for using with lpg size: 1/8 ", oxygen regulator (10 x 13b model), welding holder 600 amps, helmet for welder, leather hand gloves 12" for welder, welding glass white, welding glass black, flash back arrester, welding cable copper 600 amps, hand shield for welder use, esab 1300100195-10mm blue dura hose for oxygen, esab 1300100205-10mm red dura hose for acetylene, 1/2" x 12" long hss hand hacksaw blade-18 tpi

corporations/Associations/Others

CTN :36259211

17 Jun, 2024 18.60 Lacs

Anpara - Uttar Pradesh

Tender For supply of miscellaneous fire items for atp, anpara - hose pipe 63mm x 22.5mtr, delivery hoses pipe of male &female coupling 22.5 mtrshould be made of ss 304 and conforming to is 636,, fire bucket, 100 mm 4" steel bench vice, specification : specification for 100 mm (4") steel bench vice - 1. material : steel fabricated vice swivel with fixed base for heavy duty . 2. colour : red. 3. dimension (lxwxh) : 286mm x 128mm x 117 mm +_ 10% ., karabiner, specification : specification for karabiner : 1. shape- d type . 2. srew on biner design. 3.anti skidding . 4. material : aluminum- magnesium alloy. 5. dimension lxb (4.4 x 2.95 inch ) plus .minus 10%. 6. weight: 85 gms plus minus 10%. 7. tension 30 kn having 03 s ew lock. 8. pear shaped facilitate belaying single ropes with a munter hitch. for connecting belay/rappel devices or use at the end of a lanyard., electrical siren, specification: specification of electrical siren 03 km rang ; 1. horizontal, double mounting type. 2. arrangement for mount at high elevation of building. 3. single phase - 220/250 volts. 4. 6000 rpm , 50hz ac. 5. supporting spares for installation and switching device. 6. required wires should be supply along with above electrical siren. 7. audible rang- 3 km., fire gum boot, specification: specification of industrial and protective rubber knee boot is: 5557-2004 . rubber knee boot type -ii , consist of reinforcing fabric made of cotton or manmade fabric having minimum breaking load of 1000 n at warp and 550n at weft, when tested in accordance e with is: 1969 and will be lined with sea table rubber compound. material required for industrial protective rubber boot should confirm table -iii of is- 5557-2004. thickness - the minimum thickness ( rubber and fabric ) of the boot for type ii for various parts and component. all tests confirm to is: 5557-2004. size - 9 and 10, fire helmet ,specification : specification of fire helmet as per bis 2745-1983. 1. shall: the shell of the helmet shall be made of non metallic materials so as meet the test requirement mentioned in bis 2745-1983. 2. protective pad: it shall be of expanded polystyrene or materials of similar properties. 2. retention system : the material for the headband, chin strap and cradle shall be sweat - resistant.,non irritant and shall not cause skin disease. 4. size: helmet shall be of the size having circumstances of inside heaband of 560 m -600mm. 5. construction requirement: the construction of the helmet shall be comply is- 2745-1983. 6. workman ship and finish: all external surface and edges shall be smooth and rounded and there shall be no metallic parts or other rigid projections on t e inside of the helmet. the colour of the helmet shall be inherent white or lemon yellow. 7. mass : mass of the complete helmet excludingvisor may be exceed 800 gm and if exceeds, the mass to the nearest 30 gm shall be marked. 8. performances requirement: the helmet shall be comly all the test mentioned in is-2745-1983. 9. marking : each helmet shall be clearly and indelibly marked with the following- (a) manufacturers name or trade mark. (b) size with colour. (c) year of manufacture, with or with-out vi, fire bell , specification :fire bell as per is: 928-1984, hose winding machine, specification : specification for hose binding machine (manual) carbon steel, as per is: 3744 hose binding machine is used to firefighting hoses to the shanks of couplings, using copper/g.i. wire.itssimpple rugged design ensures long and trouble free operation, and it an easily operated by a single person, with minimal training. different sizes of couplings can be bound using the adaptors provided. brief description: hose binding machine, as per is:3744, made of carbon steel and c.i graded material. the machine shall be suitable for binding firefighting hose on hose coupling shanks using copper or g.i. wire. male and female abaptors of different types and sizes, for binding of hoses can be supplied along with the machine(optional). 1.0

Fire Hoses Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others