Tender For empanelment of service providers (system integrators / channel partners / authorised dealers) for supply, installation, testing, commissioning and maintenance of security & fire safety related equipment
Tender For non-comprehensive maintenance of firehydrant, sprinkler & fire alarm systems plus supply & fixing of firehydrant equipment that are either missing or required as per mandatory fire protection rules and inclusive of renewal of n.o.c. documents as required by competent authorities
Tender For bid to ras corrigendum : providing of assets insurance service - mega risk insurance, terrorism insurance, electronic equipment insurance, all risk policy, money insurance, fire insurance, as per bid doc atc; as per bid doc atc, property damage cover, standard fire & special perils cover..,liability insurance service - public liability act & industrial risk,marine and transit insurance service - cash-in-transit, inland transit, marine cargo exports/imports, marine cargo inland, as per bid doc atc; land, sea, air
Tender For corrigendum : supply of alarm monitoring system ams with software as per tts , control panel with 15 inch ams display and yard supplied equipment in switchboard room bulk head mounted as per tts , display of 12 or 15 inch flush mounted on bridge console display size will be confirmed during detail design as per tts , power supply to the displays is either from individual 230v ups or from common 24v dc ups as per design and tts , audio visual high intensity flashing beacon as per tts , i o cards digital analog digital counter rpm rtd serial link etc network switches etc as per design and tts , alarms printer as per tts , ups with batteries cum dc distribution board of suitable capacity refer clause 8.2 as per tts , addressable fire detection and general alarm system as per tts , combination detector smoke or heat or rate of rise temperature or uv-ir or optical with base and mountings as per tts , heat detector with base and mountings as per tts , flame detector with base and mountings as per tts , indoor manual call points with mountings as per tts , outdoor manual call points with mountings as per tts , general alarm push button with cover to avoid accidental activation with mountings as per tts , sensors or switches for monitoring door status open or close as per tts , bilge level float switches as per tts , high level float switches side mounted for fuel oil tanks as per tts , high level float switches top mounted for dirty oil tank as per tts , temperature transmitter as per tts , pressure transmitter as per tts , supporting accessories wt junction boxes cable connectors glands interface converters power supply converter with auto transfer switch galvanic isolators , special cables refer clause-11 as required as per tts , obs list of spares and qty as required as per tts , special tools and commissioning spares as required as per tts , class inspection charges as lumpsum , documentation drawings certificates installation operational and maintenance manuals as per tts , service support for training testing commissioning and trials as lumpsum , any other item not included above however the same would be required for proving the system during commissioning or hats or sats as required as per tts , man day rate for deputing service engineer beyond lump sum cost due to delay beyond control of supplier
Tender For auction sale of rolling stock - lot no.divn/mn/94/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058402/c gs 2) se 058293/c wgscn 3) se 058285/c wgscn 4) se 058283/c wgscn 5) se 058410/c gs 6) se 058304/c wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-01 (bogie no. 101920/10), srl no.04-01 (bogie no 815-1024 /06) srl no.05-01 ( bogie no. 130036/13) and srl no.06-01(bogie no. 101723/10) (c) the coaches are to be sold with 08 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-02, srl no 03-02, srl no.04-01no, srl no 05-01 and srl no 06-01. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of rolling stock - lot no.divn/mn/95/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058220/c wgscn 2) se 058233/c wgscn 3) se 058266/c wgscn 4) se 058291/c wgscn 5) se 058415/c gs nb: [1]. (a) all coaches are to be sold without 20 nos. wheel sets complete alongwith roller bearing against srl no 01 to 05 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-02 (bogie no. 501-4221/10 & scn -8031/17), srl no.03-01 (bogie no scn -6654/15) srl no.04-01 (bogie no.110351/11) (c) the coaches are to be sold with 06 nos.unserviceable bogies without excluded fittings. against srl no. 02-02, srl no 03-01, srl no 04-01, srl no.05-02nos. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 20 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.