Tender For supply of sitc of pressure monitoring system , pressure relief dampers , medical gas pipeline , laminar air flow , ahu and other accessories. , copper pipe for ahu , vrf outdoor unit , ahu vfd with control panel , ducting , insulation , volume control damper , fire control damper fusible link , ra grill , clean room luminaries , recessed round down light , mirror light , electric switch and socket complete set six module , electric switch and socket complete set three module , electric switch and socket complete set four module , electric switch and socket complete set two module , four square mm copper wire with conduit , twenty five mm ms conduit along with accessories , aluminium armoured cableone hundred twenty sq mm along with cable tray , two and half copper flexible cable three core , ten sq mm copper armoured cable four core along with cable tray , copper armoured cable six sq mm along with cable tray , mccb panel , electrical panel with all accessories , electrical db with all accessories , wall panel system puff , ceiling panel system puff , ups , pvc flooring with self levelling antistatic , dismantling aluminium partion door glazing etc , h type stainless steel handle , tower bolt , brick work , cement plaster , cement based putty , wall painting , hermetically seald siliding door , aluminium work for fixed partition , aluminium work for window and door , glazing in aluminium door window ventilator etc , door closer , reinforced cement concrete work , centering and shuttering including strutting propping etc , steel reinforcement for rcc , mortice latch and lock , vitrified tiles in different sizes , dgu fixing in window , demolishing brick work , painting with synthetic enamel paint , removing dry or oil bound distemper water proofing cement paint , removal and refixing mineral fibre false ceiling tiles , steel work in built up tubular , pre painted galvatume aluminum zinc coating gi based corrugated steel sheet , hermetically seald swing door , sitc of hermetically seald swing door , corner coving
Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix