Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and firstaidbox for any emergency. 9. delivery by actual weighment basis only.
Tender For corrigendum : supply of supply installation testing and commissioning of 1600 kva 11 by 0.433 kv delta star step down as per atc attached , supply installation testing and commissioning of 11 kv 630a rated breaking capacity 21ka for 3sec sf6 insulated rmu as per atc attached , sitc of 2500 amps sandwich type bus trunking as per atc. , supplying and laying of 3 core 150 sqmm xlpe insulated cable on the existing cable tray or rcc or hume or metal pipe or susface as per atc attached , supplying and laying of 3 core 150 sqmm stranded aluminium conductor conductor screen with extruded semi conducting compound xlpe insulated cable in the existing masonary duct as per atc attached , supplying and makingoutdoor cable end termination with heat shrinkable joint for 3 core 150 sqmm 111 kv grdae as per atc attched. , copper plate earthing complete as per atc attached. , gi plate earthing complete as per atc attached. , providing 50 mm and 5 mm thick copper strip on surface as per atc attached. , providing 25 mm and 5 mm thick copper strip in 40 mm gi pipe as per atc attached. , providing 25 mm and 5 mm thick copper strip on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class in ground as per atc attached. , supplying and laying 120 mm dia dwc hdpe pipe as per atc attached. , supply and installation of 4.5 kg co2 type fire extinguisher isi marked as per atc attached. , supply and installation of 06 kgs abs powder type fire extinguishers as per atc attached. , supply and installation of 3 mm thick rubber mat suitable for 33 kv as per atc attached. , supply and installation 0f 4 nos 9.5 ltrs capacity gi bucket as per atc attached. , supply and installation of firstaidbox as per atc attached. , supply and fixing safety instruction chart as per atc attached. , supply and fixing shock treatment chart as per atc attached. , supplying and fixing of 40mm x 40mm x 5mm thick angle iron frame complete as per atc attached. , supplying and fixing of single line diagram and layout diagram complete as per atc attached.
Tender For supply of lsa items for dci dredgers on rate contract basis - schedule- a: life saving appliancesinflatable life raft fully conforming to chapter iii-regulations 39 of 1983 amended to solas 1974 complete with "a" type emergency/ survival pack grp container and securing arrangements, fully inspected, approved and certified by mmd/irs,, 25 persons capacity, 20 persons capacity, 16 persons capacity, 06 persons capacity, life raft securing strap, hydrostatic release gear, m.m.d./irs approved for :, hru for life rafts, make : hammer- h20, hru for float free capsule unit of svdr, make: headway hmt-101, samyung, model: seh-02, hru for svdr, make: hammer-h20, hydrostatic release unit for svdr, solas uscg 160.062/9/0 & 160.162/7/0, imo res msc.81 (70), hydrostatic release unit for epirb, model: hru-10 (saracom), hru with bolt for epirb, make: acr, hru-100, hru for epirb, make: acr, model : rlb-27/2756, hru for epirb, make: nova marine, model: rt260m, hru for epirb, make:mcmurdo, model e-3, hru for epirb, make: hammer-h20, firstaidkit for life boat mmd/irs approved, firstaidbox-aluminium box, repair kit for life boat, mmd/irs approved, sea anchor with lines for life boat between 22 and 30 feet, mmd/irs approved, buoyant heaving line for life boat nylon 15 fathoms, mmd/irs approved, bouyant bailer, emergency concentrated all-in-one life boat/life raft ration pack of 1/2 kg for 1 person for life boat approved and certified by mmd (india) /irs or ec type approval with guaranteed for five years shelf life,, life boat water packets 500 ml, mmd /irs approved, shelf life 5-years, life boat axe with polished handle, life boat signaling torch (chrome plated) mmd/irs approved, water measuring glass for life boat, life boat oars, open type life boat (life boat dimension: 8.00 m x3.00 m x1.20 m, life boat capacity: 51 persons, life boat hooks, open type life boat (life boat dimension: 8.00 m x 3.00 m x 1.20 m, life boat capacity: 51 persons, jack knife with tin opener with laneyard, sen house slip brass, life boat/ pilot ladder as per the solas regulations, pilot ladder steps wooden as per the solas regulations , inner edge 400mm, width=115mm & thickness=25 mm, pilot ladder steps rubber as per the solas regulations, inner edge 400mm, width=115mm & thickness=25 mm, embarkation ladder for life boats, mmd approved (length: 10.50 mtrs (2 in nos.) rope dia: 20 mm, polypropylene), spare stud blocks with holes for pilot ladder, pilot ladder spreader wooden as per the solas regulations,inner edge 1800mm, width 115mm, thickness 25mm, winnets for pilot ladder, anti sea sickness tablets, mmd /irs approved, anti stab vests as per solas regulation, life vests, high beam torch as per solas regulations, hand cuffs, life boat weather tight matches, pyrotechnics (approved by mmd/ irs as per solas 1983 require-ments) or ec type approval based on ms notice 5 of 2007., parachute distress rocket signal suitable for ships life boat and life rafts approved and certified by mmd/irs, india or ec type approval based on ms notice 5 of 2007, pin-point distress hand flare suitable for life boats and life rafts, approved and certified by mmd/irs, india, or ec type approval based on ms notice 5 of 2007, buoyant orange smoke floats for ships, life boats and life rafts approved and certified by mmd/irs india, ec type approval based on ms notice 5 of 2007, manover board- self activating smoke and sea activated light marker for bridge life buoys (suitable for day and night signaling) approved by mmd /irs, india, or ec type approval based on ms notice 5 of 2007, brackets for above manover board, line throwing appliances/ apparatus complete set. as per chapter-iii, regulation 49 of solas 83 amendment, approved and certified by mmd/irs (india) or ec type approval based on ms notice 5 of 2007. full set of 4 units each self contained (comprising of 4 nos. apparatus with lines), 4 nos. 41mm rockets and ignitors.), spare speed line "250" comprising self contained line throw
Tender For corrigendum : supply of accessories/ consumables/ spares for medical equipment - temperature cable for blt monitor part no 15-031-0066, accessories stand,wall mount for blt monitor part no 15-031-0099, nibp hose cable for blt monitor part no 15-031-0008, nibp cuff adult for blt monitor part no 15-100-0118, spo2 sensor clip type (one piece)for blt monitor part no 15-100-0358, spo2 sensor clip type for blt monitor part no 15-100-0320, spo2 analog extension cable for blt monitor part no 15-100-0357, five-5 lead ecg cable set clip type for blr monitor part no 15-031-0022, five-5 lead ecg cable set snap type for blt monitor part no 15-031-0002, three-3 lead ecg cable set for blt monitor part no 15-031-001, rs232 communication board for schiller tmt machine (stmt), kit screw stickers epure- sav-01-0024 for ot light, model epure, ball values for drain for-ultrasonic instrument cleaner, epure keybord- sav-01-0025 for ot light, model - epure, analog timer for ultrasonic instrument cleaner., cover glass 1 complete set for famed -mobile lamp., reusable bipolar with fixed plug , 3m-for electro surgical unit (cautary unit) make- eschmann, model- td830, mattress head section (50mm) t20-431-0001), vpx exhaust hose part no-216018 for eschmann suction unit -1no, compressor for sarns tcm ii, battery li-ion - schiller ecg machine, kit sp2 x battery 12 v,80 w hrl 1280 w-part no 001-20-0058, three axis pcb for ot table make- eschmann , model t20a & t20a+ installed at major ot, vpx valve hose part no-216013 for eschmann suction unit, vpx vacuum gauge part no-743077 for eschmann suction unit, vpx vacuum control valve part no-216059 for eschmann suction unit, vpx manifold hose part no-216016 for eschmann suction unit, vpx handle bar grip part no-216076 for eschmann suction unit, vpx gauge hose part no-216014 for eschmann suction unit, thermal print head for schiller ecg machine, hv board for defibrillator dg 400 for schiller defibrillator, recorder paper for schiller defibrillator, thermal printer head with rollar for schiller defibrillator, battery for schiller defibrillator, recorder pcb for schiller defibrillator, adult contact plate for schiller defibrillator, left and right keypad for schiller defibrillator, left and right keypad pcb for schiller defibrillator, paddle pcb for schiller defibrillator, encoder knob for schiller defibrillator, smps module for schiller defibrillator, relay interface board for schiller defibrillator, lcd for schiller defibrillator, hv board 200j for schiller defibrillator, wooden platform for schiller tmt machine (stmt), walking belt for schiller tmt machine (stmt), nibp tube 3m-reusable-2601195 for monitor, model- vista-120, make- drager, smps for schiller tmt machine (stmt), relay board for schiller tmt machine (stmt), opto coupler - speed for schiller tmt machine (stmt), opto coupler - elevation for schiller tmt machine (stmt), main transformer for schiller tmt machine (stmt), main motor for schiller tmt machine (stmt), iu pcb for schiller tmt machine (stmt), interface cables edc to iu, tmt to iu for schiller tmt machine (stmt), eprom for schiller tmt machine (stmt), elevation motor for schiller tmt machine (stmt), edc pcb for schiller tmt machine (stmt), ac drive unit for schiller tmt machine (stmt), ten lead patient cable for schiller tmt machine (stmt), expiratory valve for evita, reusable-8410580, safely disk for maquet (datascope) iabp machine- data scope, recorder board for maquet (datascope) iabp machine- data scope, purge assembly for maquet (datascope) iabp machine- data scope ., pressure transducer cable for maquet (datascope) iabp machine- data scope ., power supply module for maquet (datascope) iabp machine- data scope ., motor controller pcb for maquet (datascope) iabp machine- data scope ., modem board for maquet (datascope) iabp machine- data scope ., main cpu pcb for maquet (datascope) iabp machine- data scope ., front end pcb for maquet (datascope) iabp machine- data scope., fill assembly for m