Latest fish plate Tenders | Government fish plate Tenders

Central Government/Public Sector

CTN :45400956

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate,, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, prptecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45400958

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45372110

22 Jun, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of wiper assly complete consisting of : - 1) motor assly, spindle length 135 mm 1 no 2) arm and blade assly 1 no 3) control valve assly 1 no conforming to clw drg no. clw ac163 alt 3. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45406777

16 Jun, 2026 NA

Delhi - Delhi

Tender For supply of joggled fish plate for uic 60 kg rail

Central Government/Public Sector

CTN :45397017

17 Aug, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of security plate for control arm fitment in fiat bogie to drg. no 1356259 ver.05. acceptable material is as per is spec no is-6911-1992 grade x04cr19ni9, iss304 s1 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45401053

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of pway scrap - condemned, released & un-serviceable cl-iii ms scrap such as stock no.1:- 1)52kg joggled fish plate of size-1348nos-19.053mts. 2) combination fish plate-83nos-1.008mts. 3)fish plate of sizes-1054nos-10.785mts. 4)52kg fish plate 1m long-8nos-0.185mts.5)¿c¿ clamp-720set-4.288mts.6)steel channel sleeper-3nos-0.436mts.7)rail 52kg (cut rail pieces)-28.77mtrs-1.493mts.8)cst 9 sleeper-7nos-0.164mts.9)ms scrap-2305kg-2.305mts.stock no.2:-10)guard rail clip-1753nos-0.836mts.11)slide chair ms-139nos-2.368mts.12)bearing plate spl size-27nos-0.551mts.13)stretcher bar-12nos-0.548mts.14)guage tie plate-3nos-0.165mts.15)fish bolt and nuts of sizes-450nos-0.412mts.16)ms bolts of sizes-386nos-0.245mts. [ total-44.842mts]. location-available at sse/p.way/svv office campus.not for sale-nil,all other materials near to this lot to be treated as nfs,since yard, for sl.no.9 one pile of various materials including bolt and nuts.note-[1] -[1] delivery to be made on actual weighment basis only. in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5mtrs length, the purchaser (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5mtrs and hand over the non-ferrous and excess quantity to the custodian,,[2]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian as nfs. s1539.udm no.089552-25-00001 dt.26.12.25 hsn code no. 720429.

Central Government/Public Sector

CTN :45372343

22 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply and installation of pillar mounted jib crane. technicalspecifications - main hoisting capacity:1 ton (swl),standard: confirms to is: 3177/3938/ is : 807,class: class - iii ?heavy duty (indoor / outdoor, nh,45 degree at), span (arm length): 4 mtr approx, lift height/total ht: 4 mtr approx, angle to rotation: 360 degree electric, column: fixed type,control: through pendant push button., speeds: with single speed in all motion: 2-4mtr / min for main hoisting up anddown. : 2-4mtr / min for cross travel. : 1-2mtr / min for rotation travel. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45392724

30 Jun, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing & supply of 1in12 bg weldable cms crossing for 60e1 rail in r-260 grade on psc sleepers in accordance with rdso drg. no. t-6412 alt.6 conforming to irs specification t-12/2009 (reprinted oct,2021) & t-29 (revised-2024) including ncrgrsp & insulating liner (hvn) and excluding supply of standard fish plates, fish bolts & nuts & erc. weldable cms crossing shall be supplied with distance blocks as per drg. no t-10091 & t-10092 each well fitted and tightened with 4 nos. bolts of t-11505 & 4 nos. single coil spring washer of t-10773 as shown in rdso/drawing no. t-6412(alt-06).list of fittings to be supplied with each set is enclosed as annexure-'a' note:- (i) ncrgrsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi). (ii) hvn liners shall be procured from rdso approvedvendors only as per irs specification no. irs:t-44(third revision). [ warranty period: 30 months after the date of delivery ][ rate of supply 40 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45405511

15 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For running contract for manufacture and supply of 10125 mm thick web curved switches with check rails for 25t axle load with complete fittings as per rdso drg. no. t-9791 (alt-02) and spring setting device as per drg. no. t-6216 with latest alteration, including metal liner, pocket type ncr-grsp (10mm thick) but excluding standard fish plates, standard fish bolts & nuts, elastic rail clips, hvn insulating liners. pre-curving of tongue rail & stock rails for turnouts of similar & contrary flexure shall be done whenever required, without additional payment, in accordance with rdso's guidelines of pre-curving issued vide letter no. ct/ptx/tws design dated 27.07.2018. the stock rail shall be in 60e1 rail profile of r-260 grade and tongue rail shall be in 60e1a1 rail profile of r-260 grade as per irs specification no. t-12 and irs specification no. t 10 2025 and irs no. irs no. t 62 2025. " as per note sl no. 27 of rdso drg. no. t-9791, alt-02, "10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 12 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-9791, alt-02, annexure-b. ) shall be supplied with every purchase order of 1 in 12 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 12 60e1a1-tws ".note:- (i) the rate includes cost of stock rails, tongue rails and check rails. note:- (ii) ncr grsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi) note:- (iii) spring setting device shall be procured from rdso approved vendors only as per irs specification no. t- 54 (revised - 2024) note:- (iv) list of fittings is enclosed as annexure-a . note:- (v) list of breakage prone and wear prone spare parts is enclosed as annexure-b. note:- (vi)the lh & rh quantity bifurcation is as under- lh = 400 sets & rh = 400 sets. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45405686

29 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of inspection gauge for joggle fish plate 60 kg drg. no. t- 5849 [ warranty period: 30 months after the date of delivery ] ]

Fish Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors