Latest fitted bolt Tenders | Government fitted bolt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38583177

30 Dec, 2024 NA

Erode - Tamil Nadu

Tender For supply of bolts ms black hex.head round body with hex.nuts m20 x 90 mm.to is.1363/84 part 1 & 3.

Central Government/Public Sector

CTN :38583294

31 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of bolt ms black hex. head round body with hex.nuts m12 x 50mm to is.1363-1984 part 1 & 3.

Central Government/Public Sector

CTN :38570204

31 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of bolt ms black hex head round body with hex nuts m16 dia x 65mm long to i s.1363/1984.is.1363/84.part 1 & 3 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604882

02 Jan, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of bolts ms black hex head round body with hex nuts m-16 x 75mm to is: 1363/1984 rev.1 (reaffirmed part 1&3/1992). [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38567978

18 Dec, 2024 NA

Angul - Odisha

Tender For supply of hex. head bolt & nuts m 12 x 45 mm of product grade 'c' m.s. black is: 1363 (p art-i) 2002 (4th rev.) and is:1363 (part - 3) 1992 (3rd rev.) property class 4.6 for bolt and property class 4.0 for nut. [ warranty period: 30 months after the date of delivery ]

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

Central Government And Public Sector

CTN :38416066

18 Dec, 2024 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of hexagonal head bolts & nuts 12 x 40 mm, products grade-c, m.s. black confirming to is:136 3-(part-1) 2002 for bolts; products grade-c, m.s. black confirming to is:1363-(part-3) 2002 for nuts. propert y clause 4.6 of table '8' for bolt and property clause 4 of table '8' for nut. [ warranty period: 30 months a fter the date of delivery ]

CTN :38588597

06 Jan, 2025 1.71 Crore

Kupwara - Jammu And Kashmir

Tender For supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms,shs 6 mm thick size 120x120mm x 2.4m long for column with holes as per tech spec,ismb 150 rsj 150 x 75 mm 1.85 mtr long for beam conforming to relevant is as per tech spec att,ismb 150 rsj 150 x 75 mm 60 cm mtr long for beam conforming to relevant is as per tech spec att,ismb 125 rsj 125 x 70mm 3.0m long for beam conforming to relevant is as per tech spec att,shs 6 mm thick size 70x70mm x 1.85m long for with conforming to is as per tech spec att,6mm thick ms plate 75x150mm welded with g1 beam connected with nut and bolts,6mm thick ms plate 100mm x 100mm with a gap of 75mm as per tech spec att,12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column,6mm thick ms base plate of size 150 x150 mm for shs column as per tech spec att,steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att,ms hexagonal nuts bolts and washers 12 mm dia 40 mm long.,ldpe sh

Central Government / Public Sector

CTN :38567789

23 Jan, 2025 NA

Kazipet - Telangana

Tender For manufacture and supply of m.s. bolts & nuts of size 25 x 90 mm as per rdso drawing n o. t-11504 with latest alterations as on date of tender opening, confirming to specification irs t-23: 2 021 corrigendum 5 of oct 87 with latest alterations, if any.(note:material should be delivered at sse/ p.waydepot/kzj/ scr) [ warranty period: 30 months after the date of delivery ]

Fitted Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors