Latest flange cover Tenders | Government flange cover Tenders

Central Government/Public Sector

CTN :44504999

24 Mar, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap loco parts consist of gear casing embedded with cardium , side buffer, cbc, draft gear, feed valve, angle cock, sander valve, dumper, pully, sand box, plug capnut, outer drum, ragb spare, shaft, ecc coil, cow catcher, knuckle, yoke pin, clevis, lock, follower plate, inner , outer, and secondary coil spring, conv inner thrust collar, middle lock plate, distance piece, loose lip, space ring, abutment ring, plain racer, lipped racer, thrower, axle box cover, end small plate, carbon plate, with or without nf and ci and other attachments. location- c by 1

Central Government / Public Sector

CTN :44530947

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030122 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr , bobrnel , boxncr ,available on rails. 1) scr boxnr 25099617922 ,2) er boxnr 25029698656,3) er boxnr 25029660189, 4) er bobrnel 72029682239, 5) ser boxncr 10079561494. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.sab 9.yoke pin support (1st plate),10. safety plate with anchor plate(2ndplate11.yoke support plate(3rdplate),12.yoke pin, 13)draft gear followers,14.knuckle pin.15.knuckle thrower.16.back stopper.17.bronzebuishesds8no:0999603122. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 54.813 .mt (m.s -38.069, ss-16.744) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530949

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030121 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bobrnr m2, boxnr , bcn m1 .available on rails. 1) ser box nr m2 25079660030 ,2) ser box nr 25079662942,3) special repair bcn m1 30069160018,4) er box nr 10029661403 ,5) scr box nr 25099636688. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. distributor valve,, 9 .sab 10.yoke pin support (1st plate),11. safety plate with anchor plate (2n d plate 12. yoke support plate(3rdplate),14.yoke pin,15)draft gear followers,16.knuckle pin.17.knuckle thrower.18.back stopper. s8no:0999603121. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.909 .mt (m.s -37.043, ss-15.866) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530951

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030120 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, bcn m1 boxnr , bobrn m1 .available on rails. 1) er bcn m1 30029060266,2) scr bcn m1 30099082380 ,3) er bcn m1 30028860355 ,4) ser box nr 25079662164 ,5) er bobrn m1 72029681010 . location : road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 .sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper.20.bcn flap,21.bronze buishes ds8no:0999603120. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 64.728 .mt (m.s -60.542, ss-4.186) sold by number basis only.05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530953

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030119 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr m2 , boxn m1 , bobrn m1 .available on rails. 1) ser boxnr m2 25079662218 , 2) nr boxn m1 10039660830, 3 ) ser boxn m1 10079662313, 4) er boxnr m2 25029660042, 5) nr boxn m1 10039660014. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 . sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper. ds8no:0999603119. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.063 .mt (m.s -40.447 , ss-6.616) sold by number basis only. 05 nos .delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530955

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 031326010100 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons,bcn m1, boxn m1 , available on rails. 1) cr bcn m1 30019060474, 2) scr boxn m1 10099660337 ,3) ser boxn m1 10079660333 ,4) ser boxn m1 10079667271 ,5) nr bcn m1 30039018288 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. wheel set with ctrb, 8. casnub bogies with all fittings, , 9. yoke pin support (1st plate),10. safety plate with anchor plate (2n d plate 11. yoke support plate(3rdplate), 12., yoke pin, 13) draft gear followers,14. knuckle pin 15.knuckle thrower.16. bcn swing. ds8 no:0999603100. dt:24.01.26. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 39.124 .mt sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :44530773

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, bobrnm1, boxnr, boxnm1 & bobrm1 wagons no as following: [1] ser 30078963020 bcnm1 [2] er 72029678980 bobrnm1 [3] er 25029660899 boxnr [4] er 10029661281 boxnm1 [5] scr 10099662737 boxnm1 [6] er 72029561275 bobrnm1 [7] ser 25079662478 boxnr [8] er 72029661159 bobrnm1 [9] er 72029662002 bobrnm1 [10] cr 72019360383 bobrm1 [11] nr 10039660588 boxnm1 [12] ser 10079649802 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (144.640 mt) is the lot quantity (144.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii)for bobrnm1 & bobrm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl no. 05 and 08 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :44530775

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] scr 85099660762 bvzc [2] er 85029660251 bvzc [3] er 85020160019 bvzc [4] nr 85039660418 bvzc [5] ser 85079704424 bvzc [6] cr 85019960026 bvzc [7] secr 85140439545 bvzc [8] special repair 85060460087 bvzc [9] nr 85030150413 bvzc [10] special repair 85069757119 bvzc condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (92.350 mt) is the lot quantity (92.350 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :44141918

21 Mar, 2026 NA

Betul - Madhya Pradesh

Tender For corrigendum : supply of 1. 50 inch ball valve heavy duty , 1000 psi water pressure meter 4 inch dial , c130 belt , cotton waste , cylindrical roller bearing nj310 , deep groove ball bearing , feed cylinder leather bucket , flange cover packing , gps125 mud pump liners , gps125 piston rods , hand gloves , hq core lifter , hq core lifter case , hq overshot latches with spring , hyd chuck pinion rack rd100 , hydraulic chuck t bolt rd100 , liner packing gps125 mud pump , nq box to nw pin adapter , nq core lifter , nq core lifter case , nq guide and locking coupling , nq inner tube head latches with spring , nq landing ring , nq overshot latches with spring , nq pin to nw pin adapter for hoisting plug , nq shutoff valve nylon , oil seal 68 mm x 90 mm x 13 mm , oil seal 70 mm x 90 mm x 13 mm , oil seal 90 mm x 110 mm x 12 mm , piston rod v packing gps125 mud pump , retraction cylinder leather bucketrd100 , rubber bucket 76mm gps125 mud pump , rubber bucket 81mm gps125 mud pump , taper roller bearing 552 or 559 , tapered roller bearing 32312 , thrust bearing 51115 , thrust bearing t10 , thrust bearing t6 , thrust bearing t8 , valve insert packing gps125 mud pump , conventional water swivel packing , conventional water swivel wash pipe

Central Government/Public Sector

CTN :44481090

24 Mar, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bin no. c-5 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery.

Flange Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector