Latest flanged Tenders | Government flanged Tenders

State Government

CTN :38593011

27 Dec, 2024 NA

Alipurduar - West Bengal

Tender For supply and delivery of 15mm, 25mm and 150mm double flanged analogue water flow meter at alipurduar division, phe dte.

State Government

CTN :38593084

27 Dec, 2024 NA

Alipurduar - West Bengal

Tender For supply and delivery of different dia double flanged ms and ci butterfly valve at departmental store under alipurduar division, phe dte.

Central Government/Public Sector

CTN :38604274

23 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of flanged end fitting straight (with rubber gasket and 4 sets. of stainless steel fasteners of size m6 x 25 mm length, flat washer - 2 nos., 1 spring washer - 1 no., & nut - 1 no.) suitable for conduit size nw 70 as per rdso specification no. rdso/pe/spec/ac/0138-2009 (rev.1), annexure -a, table a-12. s.no 1 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :38567718

20 Dec, 2024 NA

Bongaigaon - Assam

Tender For supply of flexible connector hose with stainless steel mesh protection, length (end to end) : 787 mm, pressure tightness 10 kg/sq.cm and test pressure 15 kg/sq.cm, outside ss mesh shall be of ss-304 grad e, end connector ss-304, size of connector hose : 25 bore (throughout), threads : 1? bsp iso 7/1, temper ature range : -30degree celsius to 100 degree celsius, collar of flexible connector (on internal thread en d) : flanged type, sealing & o ring : virgin pfe [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38602003

06 Jan, 2025 NA

Balaghat - Madhya Pradesh

Tender For supply of lot-1: square head bolt, material en-8 (as per drg: bm/mech/10/79-a, b & c) , lot-2: flanged type bush, material- copper alloy (cu 85% & zn 15% ) (as per drg no: maf038.4. 042 a&b) , lot-3: steel spring, material- cast iron bs 1452 gr. 200 (as per drg no: bm/mech/10/80)

CTN :38320145

18 Dec, 2024 NA

Delhi - Delhi

Tender For bid to ras supply of auto phase squence corrector , gi pipe meduim grade 50 mm dia bore , sodium hypo chlorite having 10 percent chlorine contant , poly aluminium chloride100 percent chlorine contant , gi pipe meduim grade 40 mm dia bore , fasd panel 15 hp , soft starter 25 hp , antifoaming agent for treatment of stp water , gi column pipe 50 mm dia bore both end flanged 3 mtr long , fasd panel 50 hp , soft starter 15 hp , soft starter 50 hp , bio culture for treatment of treated water , gi pipe meduim grade 25 mm dia bore , float valve with epoxy coated aluminium rod and high density ball 20 mm , water meter 100 mm bore , lead pig bar , strainer 150 mm bore , strainer 200 mm bore , fasd ml 4 in ss enclosure , calcium hypochlorite granules (65 - 70 %) (v2) (q2)

CTN :38555964

02 Jan, 2025 NA

Jodhpur - Rajasthan

Tender For tender for supply of air cyl head gasket, consisting of 7, head lamp low beam, lh with leveller, transmission assy, flanged screw, seal

CTN :38601452

06 Jan, 2025 95.20 Lacs

Sangli - Maharashtra

Tender For supply of ball valve sw 3 pc 20nb 800 class , ball valve sw 3 pc 25nb 800 class , ball valve 50nb 300 class , ball valve 80nb 300 class , ball valve 100nb 300 class , ball valve 150nb 300 class , ball valve 200nb 300 class , ball valve 250nb 300 class , ball valve 350nb 300 class , gate valve sw 20nb 800 class , nrv 50nb 300 class flanged , nrv 100nb 300 class flanged , nrv 200nb 300 class flanged , nrv 250nb 300 class flanged , nrv 350nb 300 class flanged , 3 way valve 100nb 300 class , 3 way valve 200nb 300 class , 3 way valve 250nb 300 class

CTN :38602301

08 Jan, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of flanged end swing type check valves (non return valves)

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con

Flanged Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector