Latest floating shaft Tenders | Government floating shaft Tenders

State Government

CTN :40279012

16 Jun, 2025 274

Bengaluru - Karnataka

Tender For e- tender for supply of orthopaedic trauma and arthroplasty implants high end - hemihydrate calcium sulphate kit 10- cc, hemihydrate calcium sulphate kit -5 cc, distal femur nails for standard and periprosthetic fractures with larger distal bends and with locking attachment washer or condular nuts and washers, us fda approved, reamer bone harvesting kit with reamer head and reaming rod , us fda approved , variable angle locking calcaneal plate 2.7mm with/without tab small/medium/large -, 2.7mm va locking screw -, 2.7 mm metaphyseal screw 2.7mm cortex screw variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., low profile distal tibial medial plate 3.5mm,6-14 holes,titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., lcp anterolateral distal tibia plate 3.5mm, right or left,(5-21)holes, titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium, radial head replacement system is a solution for replacing the radial head for radial head fractures to restore elbow stability and forearm rotation to maintain the legth of radius. implants should be available in 19 mm,22 mm,25 mm variant and available in stem varing 5.5 mm to 8.5 mm and stem length 21 mm to 24. the implants should be uncemented with all instruments in sterile form for one time use., polymethylmethacrylate (pmma) injectable bone cement system for augmentation of proximal femoral nailing system (tfna) through cannulated implants and instruments for patients with poor bone quality (such as osteoporosis). its applicator allows surgeons to inject cement into the femoral head through cannulated implants, reducing the risk of cut-out, locking attachment plate 3.5 mm is a fixed-angle construct in periprosthetic fractures and fractures in the presence of intramedullary implants, particularly in osteopenic bone where screw purchase is compromised the plate is attached to existing locking compression plates (lcp using a connecting screw, to augment stabilization of fractures.the arms on each side of the plate offer the possibility of bypassing the prosthesis stem with 3.5 mm locking screws (or 3.5 mm cortex screws)., locking anterior patella variable angle plate for simple and complex patella fractures should have range of plates - core, to address different fracture pattern with 2.7 mm va locking screws and 2.7 cortex screws. variable angle locking screw should have option to lock at 15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., variable angle locking hand system consists of plates that are anatomic, procedure-specific for the fracture fixation of metacarples and phalanges, 1.3 mm profile plate configuration includes either straight plate/ t-plate/phalangeal base plate/y- plate/strut plate/web plate/phalangeal head plate, the construct consists of plate 1.3 mm, va locking head screw 1.3mm, cortical screws 1.3 mm., variable angle lcp clavicle plate which can be used for lateral extension, medial, shaft, anterior and for ac joint fracture. the construct consist of plate, locking head screw 2.7 mm and cortical screws 2.7 mm, (compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce stan

CTN :40307684

17 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - nut,self-locking,extended washer,he, hc stud headless screw, ring,retaining, o-ring, grease, thermal relief plug, pre-formed packing, damper, screw, link set,weak,refueling boom, filter element,fluid, bearing seal, bag, desiccant, shear pin, pin,tapered,plain, self-locking nut, dust filter, petroleum base hydraulic fluid, sealing compound, pin, screw,machine, washer, pin, grease, aircraft and instrument, screw, spring, pin, indicator plate, corrosion inhibitor, methyl ethyl ketone, technical, screw fxm5x12, adhesive, sealant, filter element,intake air cleaner, filter cartridge, v belt, stop-ring, pin,straight,headed, adhesive, sealing compound, o-ring, sealant, pre-formed packing, sealing compound, parting compound, adhesive, data bus electrical contact, cable tie 102x2,4mm, shackle, adhesive, pre-formed packing, coupler,transmission line, oil filter, coupler,transmission line, cable nipple,electrical, pin, grease 71-10, bonding braid, packing,preformed, bracket,mounting, fuel pre-filter, lock ring, desiccant 1 ud, adhesive, belt,v, test set,relay, grease, shielding gasket,electronic, desiccant capsule, screw, filter element,fluid, cap-plug,protective,dust and moistu, uplock assembly,door aircraft, retainer,adapter,pressure fuel serv, drain-vent,aircraft, pre-formed packing, o-ring, connector,plug,electrical, desiccant 1/8 ud, striking head,mechanical, fuel filter, auto-amalgamant silicone tape, adhesive, screw,machine, adhesive, bearing,plain,rod end, tube assembly,metal, coupling half,quick disconnect, coupling half,quick disconnect, axle,shouldered, connector body,plug,electrical, cockpit fan, glass test tube, m4 nut, shaft shouldered, bolt,close tolerance, lighting test circuit board, oil mist filter seal (fl04), tube,equipped, nut,plain,round, seal,nonmetallic round section, o-ring, data bus electrical contact, hose assembly,metallic, bolt,machine, stencil tail aircraft number "2", self-sealing coupling, coupler,transmission line, connector,plug,electrical, tank gravity filler plug, threaded pin, brake hose, lower trt gasket, plr gasket, cable assembly,interface device,ele, pin, impression inspection compound , surf, impression inspection compound , surf, cover,access,aircraft, screw,externally relieved body, spacer,stepped, connector body,plug,electrical, connector,plug,electrical, adapter,connector, rivet,solid, rivet,solid, hpb heating mat, lever,remote control, sleeve,compression,tube-hose fittin, push-button, water separator hose, filter media, air conditioning, sheet,metal, gasket

CTN :40400422

03 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - bolt complete switch tongue, o-ring, pin, packing preformed, washer,holder, nut,plain hexagon, bushing,sleeve, pin,retaining, screw,externally relieved body, screw, gasket, pp, tape,lacing and tying, gasket, dps cable, screw lock assy, dilutant mixture, needle, rivet blind, lens light(red), decal, triple pole switch, gasket, o-ring, connector, spring helical, pin,shoulder,headless, dps cable, spring helical,compression, o-ring, o-ring, plug,protective,equipped, o-ring, receptacle 15 size-22 d, pin,threaded,headed, hose assembly, stud assembly,turnlock fastener, lubricating oil, weapons, cleaning product, connector, screw close tolerance, gasket, connector, ring,retaining, hose assembly, packing with retainer, stud assy turnlock fastener, pin,retaining, packing,preformed *, screw, shaft shouldered, o-ring, light set, indicator, connector, pin,shoulder,headless, pin, water-displacing compound, o-ring, single side grease proof heat seal paper, f11qr3121-055, nut,self-locking,extended washer,hexagon, spacer sleeve, tubing nonmetalic, nut, o-ring, resistor,variable,wire wound,nonpre, base, seal inflatable, gasket, petrolatum usp, pin split, o-ring, hydraulic extraction tool kit, fairing alternator rh, circuit breaker, switch toggle, washer,key, cam follower,needle bearing, cover access, liner,cone, pin,threaded,headed, cover access, pin,assy, connector, connector, hose,preformed, hose assembly,nonmetallic, hose,air duct, hose assembly,nonmetallic, aerator

Central Government/Public Sector

CTN :40423348

11 Jun, 2025 9.18 Crore

Ganjam - Odisha

Tender For supply of spares for maintenance of ihc holland dredge - locking ring duo - cone seal 431, 5767372 , locking ring duo-cone seal 432, 5767373 , liquidyne groove bush-steel-wa160-l-95mm-cw-id=126mm, 110024916 , threaded liner/shaft sleeve pn.227, 57040957 , spacer pos 605, 50402653 , liquidyne lip seal, wa 600, pos 228, 02232160 , liquidyne spring seal for -wav160 part no-02232164 , slotted head screw pos no:109, m6x10 pt no.00278045 , hex head bolt pos. no:121 pt no.00142858 (m16x55mm), 00142.858 , washer pos no:124, 55089111 , throttle plate pos. no:144, wa160, 57005985 , hex. head screw pos. no:131 pt no.00141854 (m16x45mm) , hex head socket screw pos. no:136 pt no.00252734 (m12x40mm) , o'ring pos. no.126, d=13mm, l = 2375 , o'ring pos. no.127 pt.no l = 1081 ,d=6mm , liquidyne pos.no:220 , o' ring pos. no.625 d=6mm, l = 970, 20851.379 , o' ring pos. no.685 5d = 6 , l = 417, 20851.379 , o'ring pos. no.686 d=3mm, 20851.376 , spud dia 559-2860100 , pump wear plate (shaft side) part no-112, 5903880, 57010961 , suction shaft side cover part no-111, 50402359 , pump wear plate (suction side) part no-113, 57010961 , nozzle liner part no-163, dz 350 x 200 mm, 57012.007, 57012137 , shaft cover part no-150, 50401048 , hydraulic cylinder sa-110/90*2100 , bend 45 deg sl1, 380 dia , straight pipe sl2, 380 dia , bend 45 deg sl3, 380 dia , bend 45 deg 51, 380 dia , straight pipe s2, 380 dia , s3-bend 33.5 53, 380 dia , stand pipe sp/ep2, drn no. 2724100 , 90 deg sp/ep2 d1 , bend 45 d4 , straight pipe d5 , bend 45 d6 , replacement pipe d7 , compensator rubber 80mm dia , oil water cooler for ambuja dredge p.20.2pl-600 mv , seal duo-cone, mechanical face seal, goetze-76.90 , coupling saec 12/24db z = 14 inc.seals (fitted between gear box & hyd pump) , main pump bearing assembly with pedstal part no -699, 100405357 , thrust ring pt no.110 pt no.57005997 , bonded seal (dowty ring) pos no:122 pt no. 02176032, d = 51.7 , bonded seal (dowty ring) pos no:123 pt no.02176017, d = 19.65 , bucket wheel cutter part no - (bw 2410) pt no.301, 5246883 , pump casing part no-103, dn.50402346,an.57008969 , pump impleller 75-25-35 3bl wa 160 part no-105, 57015975 , suction mouth (suction line) part no-dn.50402204, pos 100 , sleeve pos 615,57032111

Central Government/Public Sector

CTN :40427167

11 Jun, 2025 9.18 Crore

Ganjam - Odisha

Tender For supply of spares for maintenance of ihc holland dredge - locking ring duo - cone seal 431, 5767372 , locking ring duo - cone seal 432, 5767373 , liquidyne groove bush- steel-wa160-l 95mm-cw-id 126mm, 110024916 , threaded liner shaft sleeve pn.227, 57040957 , spacer pos 605, 50402653 , liquidyne lip seal, wa 600, pos 228, 02232160 , liquidyne spring seal for -wav160 part no- 02232164 , slotted head screw pos no 109, m6x10 pt no.00278045 , hex head bolt pos.no 121 pt no.00142858 m16x55mm, 00142.858 , washer pos no 124, 55089111 , throttle plate pos.no 144, wa160, 57005985 , hex. head screw pos.no 131 pt no.00141854 m16 45m , hex head socket screw pos.no 136 pt no.00252734 m12 40mm , o ring pos.no.126, d 13mm,l 2375 , o ring pos.no.127 pt.no l 1081,d 6mm , liquidyne pos.no 220 , o ring pos.no.625 d 6mm,l 970, 20851.379 , o ring pos.no.685 d 6mm, l 417, 20851.379 , o ring pos.no.686 d 3mm, 20851.376 , spud dia 559-2860100 , pump wear plate shaft side part no -112, 5903880, 57010961 , suction shaft side cover part no - 111, 50402359 , pump wear plate suction side part no - 113, 57010961 , nozzle liner part no -163, dz 350 200 mm, 57012.007, 57012137 , shaft cover part no - 150, 50401048 , hydraulic cylinder sa- 110by90degree2100 , bend 45 deg sl1, 380 dia , straight pipe sl2, 380 dia , bend 45 deg sl3, 380 dia , bend 45 deg s1, 380 dia , straight pipe s2, 380 dia , s3- bend 33.5 s3, 380 dia , stand pipe spbyep2, drn no. 2724100 , 90 deg spbyep2 d1 , bend 45 d4 , straight pipe d5 , bend 45 d6 , replacement pipe d7 , compensator rubber 80mm dia , oil water cooler for ambuja dredge p.20.2pl 600 mv , seal duo - cone, mechanical face seal, goetze-76.90 , coupling saec 12by24db z 14 inc.seals fitted between gear box and hyd pump , main pump bearing assembly with pedstal part no - 699, 100405357 , thrust ring pt no.110 pt no.57005997 , bonded seal dowty ring pos no 122 pt no. 02176032, d 51.70 , bonded seal dowty ring pos n 123 pt no.02176017, d 19.65 , bucket wheel cutter part no - bw 2410 pt no.301, 5246883 , pump casing part no -103, dn.50402346,an.57008969 , pump impleller 75-25-35 3bl wa 160 part no -105, 57015975 , suction mouth suction line part no -dn.50402204, pos 100 , sleeve pos 615,57032111

Central Government/Public Sector

CTN :37552262

22 May, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : supply of w95310501495 drg: 31050156999 rev: 00 forging for threaded ring (rough machined) spec: hw19390 rev: 0 , w95310525033 drg: 31052556999 rev: 00 forging for seal ring od 1550 x id 1475 x 135 thick material: x , w95310525041 drg: 41052556998 rev: 01 forging for holding ring od 1516 x id 1255 x 39 thick material , w95310525050 drg: 41052556996 rev: 00 forging for piston ring od 833 x id 770 x 18 thick material: x2 , w95310606122 drg: 31060256995 var. 00 rev: 00 forging for ring 965 x 720 x 220 material: x22crmov12-1+ , w95310625127 drg: 41062558999 rev: 00 forging for angular ring (rough machined) spec: hw19390 rev: 04 , w95310625135 drg: 41062558998 rev: 00 forging for threaded ring (rough machined) spec: hw19386 rev: 0 , w95311202254 drg: 41120230998 rev: 01 forging for ring (r/m) material specification sa182f321 , w95311223235 drg: 41122330991 rev: 00 forging for ring r/m spec: hw19390 rev: 04 , w95311239034 drg: 31123956996 rev: 01 forging for ring(r/m) spec: hw19390 rev: 04 , w95311320192 drg: 41132056998 var. 00 rev: 00 forging for ring (rough machined) spec: sa182f321 grade , w95311320206 drg: 41132056997 var. 00 rev: 00 forging for ring spec: hw19390 rev: 04 , w95311321172 drg: 41132156998 rev: 00 threaded ring spec: hw19390 rev: 04 , w95311322128 drg: 31132256998 rev: 01 forging for ring spec: hw19390 rev: 04 , w95310625038 drg: 31062556996 rev: 01 forging for flange 16mo3 spec: hw19379 rev: 02 , w95310625054 drg: 31062556998 rev: 01 forging for extraction insert 13crmo4-5 spec: hw19497 rev: 03 , w95310625070 drg: 41062556991 rev: 00 forging for threaded ring (rough machined) spec: hw19386 rev: , w95310625089 drg: 41062556992 rev: 00 forging for seal ring (rough machined) spec: hw19390 rev: 04 , w95310625143 drg: 31062558997 rev: 00 forging for flange 16mo3 spec: hw19379 rev: 02 , w95310625151 drg: 31062558996 rev: 01 forging for extraction connection 13crmo4-5 spec: hw19497 rev: , w95310521020 drg: 41052156998 rev: 00 forge ring for angle ring of diagonal stage-hpt spec: hw19390 , w95310528016 drg: 31052856997 rev: 01 forging for shaft seal ring in two halves spec: hw19390 rev: 0 , w95310528024 drg: 31052856998 rev: 00 forging for shaft seal ring in two halves spec: hw19390 rev: 0 , w95310528032 drg: 31052856999 rev: 00 forging for shaft sealing in two halves spec: hw19390 rev: 04 , w95310528075 drg: 41052856993 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95310528083 drg: 41052856992 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95310528091 drg: 41052856991 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95310528105 drg: 41052856990 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95310528130 drg: 41052856987 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95310528164 drg: 41052856994 rev: 00 forging for sealing ring material as per hw19390 spec: hw19390 , w95310529055 drg: 41052956996 rev: 00 forging for sealing ring material as per hw19390 spec: hw19390 , w95310529063 drg: 41052956995 rev: 00 forging for sealing ring material as per hw19390 spec: hw19390 , w95310529080 drg: 41052950998 rev: 00 forging for sealing ring material as per hw19390 spec: hw19390 , w95310528121 drg: 41052856988 rev: 01 forging for ring segment in six parts spec: hw19390 rev: 04 , w95311322144 drg: 41132256996 var. 00 rev: 00 forging for bush spec: hw19390 rev: 04 , w95311320222 drg: 41132056996 00 rev: 00 forging for bush (rough machined) spec: hw19390 rev: 04

CTN :40077380

20 May, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of threaded socket , bearing bush , gasket , outlet valve , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wear parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wearing parts , set of wear parts , set of wearing parts , set of wear parts , set of wearing parts , set of wearing parts , seal ring , set of wear parts , filter candle , pair of bevel gears , wood ward governor , spring plate , support ring , support ring , seal ring , o-ring , pressure reducing station , connecting rod shaft , guide shoe , compression ring , seal ring , seal ring 13 mm , solenoid valve , inlet valve cone , plasma-nitrided

Central Government And Public Sector

CTN :40187489

31 May, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of spares for ccwph t cranes - brake mh 200-18 dia eht , brake ah 160-18 dia eht , brake ct 160-18 dia eht , brake lt 200-18 dia eht , coupling fgc-100 for ah , coupling fgc-102 for mh , coupling fgc- 101 for ct input , coupling fgc-101 for lt input , coupling fgc-103 for ct output , coupling hgc-102 for ct output , coupling fgc-104 for ct output , thruster 18 kg , brake drum mh 200 dia , brake drum ah 160 dia , brake drum ct 160 dia , brake drum lt 200 dia , floating shaft , wire rope for mh ungalvanized 20 dia 6x36 const steel core 136 mtrs , wire rope for ah ungalvanized 12 dia 6x36 const steel core 129 mtrs , 5t hook and nut only , brake shoe with liner mh 200-18 dia eht , brake shoe with liner ah 160-18 dia eht , brake shoe with liner ct 160-18 dia eht , brake shoe with liner lt 200-18 dia eht , brake liner with rivet mh 200-18 dia eht , brake liner with rivet ah 160-18 dia eht , brake liner with rivet ct 160-18 dia eht , brake liner with rivet lt 200-18 dia eht

State Government

CTN :40314906

26 May, 2025 1.01 Crore

Ahmedabad - Gujarat

Tender For dismantling of old wire rope with rope socket, floating shaft with flange coupling, central drive unit parts of hoist mechanism, pedestal with bearing of er unit, heavy duty hinges with stoppers and aldraft for door of cd unit and er unit. fabrication, supplying and erection work of new wire rope with rope socket, floating shaft with flange coupling, central drive unit parts of hoist mechanism, pedestal with bearing of er unit, heavy duty hinges with stoppers for door of cd unit and er unit, radial shape truss type foot bridge, railing for safety on anchor box etc. and all other related parts and other miscellaneous work etc. for radial gate size 30 x 20 - 20 nos of venu-2 irri. project. (dist:- rajkot)

State Government

CTN :40095274

03 Jun, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms

Floating Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government