Latest flood control valves Tenders | Government flood control valves Tenders

State Government

CTN :42901735

29 Dec, 2025 29.88 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of globe valves, gate valves and non return valves of various size and class for aoh of unit no. 10 of ph-iv, stps, sarni. - class 1500 forged carbon steel globe valve socket weld ends with ibr certificate, with hand wheel operated. body astm a105, in-situ stellited seatbonnet astm a105, in-situ stellited seatstem type 410 ssdisc type 410 ss, in-situ stellited seatyoke bush astm a439 type d2stem packing : graphite with braided ringsgasket : graphitemake- l&t valves ltd, bhel, bdk, sri iyyappa industries only, 25mm, 50mm, class 2500 forged carbon steel globe valve socket weld ends with ibr certificate, with hand wheel/handle operated. body astm a105/ astm a216 gr. wcb, in-situ stellited seatbonnet astm a105, in-situ stellited seatstem type 410 ssdisc type 410 ss, in-situ stellited seatyoke bush astm a439 type d2 / is-305 ab-1stem packing : graphite with braided ringsgasket : graphite / pressure seal ring soft ironmake- l&t valves ltd., bhel, bdk, sri iyyappa industries, 25mm, 50mm, 40 mm, class 800 forged carbon steel gate valve, socket weld end connection with mnufacturer material test certificatebody & bonnet astm sa105stem type 410 sswedge 13% cr (ss410)stem & seat ring 13% cr (ss410)gland packing : graphitestuds & nuts- astm a193 gr.b7 & astm a194 gr.2hoperation: hand wheel operatedhydro test for shell & seat:209& 153 kg/cm2intended working tempoerature of medium-425 degree cmax. permissible working pressure- 97.8 kg/cm2make- l&t valves ltd., bhel, bdk, sri iyyappa industries., valve size: 40 mm, class 1500 forged carbon steel non return valve socket weld ends with ibr certificatevalve type - piston lift checkbody & cover plate astm sa105bonnet astm a105, in-situ stellited seatseat integral + stellite gr. 6 (min 4 mm)disc 13% cr (ss410) + stellite gr. 6 (min 4 mm)studs- astm a193 gr. b7opration : selfgasket : graphite / pressure seal ring soft ironhydro test for shell & seat: 396 & 290.5 kg/cm2intended working tempoerature of medium-425 degree cmax. permissible working pressure- 183.4 kg/cm2make- l&t valves ltd., bhel, bdk, sri iyyappa industries., valve size: 25mm, pipe size: 33.4 mm x th: 4.55 mm, class 2500 forged carbon steel non return valve socket weld ends with ibr certificatevalve type - piston lift checkbody & cover plate astm sa105bonnet astm a105, in-situ stellited seatseat integral + stellite gr. 6 (min 4 mm)disc 13% cr (ss410) + stellite gr. 6 (min 4 mm)studs- astm a193 gr. b7opration : selfgasket : graphite / pressure seal ring soft ironhydro test for shell & seat: 660 & 484 kg/cm2intended working tempoerature of medium-425 degree cmax. permissible working pressure- 305.6 kg/cm2make- l&t valves ltd., bhel, bdk, sri iyyappa industries., valve size: 40 mm, pipe size: 48.3 mm x th: 5.08 mm, valve size: 50 mm, pipe size: 60.3 mm x th: 5.54 mm

State Government

CTN :42914992

29 Dec, 2025 28.64 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares for aph (model 27.5vitm 2000 72 degree pa) of 2x250mw unit no.10 and 11 of stps sarni. - spares for air preheater ( model 27.5 vitm 2000 720 pa ) of 2x250mw units., inboard & outboard static seals for hot end sector plates; (one set = requirement for 1 aph),, inboard & outboard static seals for cold end sector plates; (one set = requirement for 1 aph),, cold end grating (one set = requirement for 1 aph),, t-bar including t - bar pin, t- bar tab and t- bar clip for hot end, taper lock bush of o/p shaft of main drive gear box, kao wool packing, packing rope for air sealing cover assembly (guide bearing), packing rope for air sealing cover assembly (support bearing), 50 mm gun metal valve thread connection for los working pressure 5 kg/cm2, 25 mm gun metal valve thread connection for los working pressure 5 kg/cm2, rotor angle he (one set = requirement for 1 aph),, soot blower pipe along with nozzle assembly, filter for air motor 1" bsp, relief valve(die casting)22 mm for lube oil system, working pressure 5 ksc, one end is56mm & other end is 46 mm, make-corona or equivalent., lubricator for air motor 1" bsp, wash pipe assembly for hot end & cold end with ss nozzle(one set consist of 02 nos. ), steel wire rope preform, ungalvanised steel wire rope core iwrc/steel core as per is 2266/2002, tensile strenght-1770 n/mm2, length:70 meter, dia. of rope- 6 mm, construction 6x19, make-usha martin or equivalent., by pass seal bar assembly (one set consist of 1 hot end by pass seal bar -03 nos., 2 cold end by pass seal bar-03 nos.), hot intermediate end support grating plates, shoot blower warm gear box, air motor model no ir92ra014,5.51:1 make: ingersol rand or equivalent, pin rack assembly, guide bearing air seal assembly (consist of followings aluminium seal assembly (upper) -01 no. aluminum seal assembly (lower) -01 no. spring -06 nos. bolt-06 nos. nut-06 nos. locknut-06 nos. washer-18 nos. pin-02 nos. seal ring retainer-01 no., hot end sector plates including static seals on both side (along with fasteners) and tracking arrangements for inboard and outboard side for aph.one set consist of 03 nos sector plate i.e.a) sector plate fg to sab) sector plate fg to pac) sector plate sa to pa

State Government

CTN :43299294

03 Jan, 2026 NA

Kottayam - Kerala

Tender For supply of plumbing items " (good quality, branded items) 2" 63 mm pvc pipe 6kg , 4" 110mm pvc pipe 4kg , "25mm pvc coupling , 1" 32mm pvc coupling , 1 "40mm pvc coupling , 1 "50mm pvc coupling , 2" 63mm pvc coupling , 2 75mm pvc coupling , 4"110mm pvc coupling , "25mm pvc elbow , 1 40mm pvc elbow , 1"32mm pvc elbow , 1 " 50mm pvc elbow , 2" 63mm pvc elbow door type , 3" 90mm pvc elbow , 4" 110mm pvc elbow 4kg , " 25mm pvc bend , 1 "50mm pvc bend 6 kg , 1 50mm pvc bend 10kg , 2"63mm pvc bend 6kg , 2"63mm pvc bend 10kg , 3"90mm pvc bend 6kg , 4"110mm pvc bend 4kg , 6"170mm pvc bend , 1 "40mm pvc tee , 1 "50mm pvc tee , 2 "75mm pvc fta pn16 , " 20 mm end cap , 1 " 50 mm endcap , 2" 63mm endcap , 4" 110mm endcap , "25mm pvc45 , 1"32mm pvc45 , 1 " 40mm pvc45 , 1 50mm pvc45 , 2"63mm pvc45 , 1" 32mmpvc short bend , 1 "40mm pvc short bend , 2"63 mm pvc shortbend , 2"63mm pvc coupling pn16 , 1 "50mm pvc elbow pn16 , 2"63 mm pvc elbow pn16 , 1 "50mm pvc fta pn16 , 2" 63 mmpvc mta pn16 , 2"63 mm pvc 45 pn16 , 2 2" 75 63 mm reducer coupling pn 16 , "25 20 mm bt adaptor pn16 , "25 20 mm bt elbow pn16 , 1 "32 25 mm pvc reducer coupling , 1 1"40 32mm pvc reducer coupling , 1 "32 25 mm pvc reducer bush , 1 1"40 32mm pvc reducer bush , 2 1 "63 50mm pvc reducer coupling pn 16 , 1"32mm pvc tank connector , 4"110 mm pvc 45 , 1 50mm pvc tank connector , 2" 63mm pvc tank connector , "15mm spindle disk medium , "15mm spindle ordinary medium , "15mm pvc longbody tap , "15mm pvc shortbody tap (hose) , 1 " 40mm waste pipe , "25mm pvc ball valve (t bay) , 1" 32mm pvc ball valve (t bay) , 1 "40mm pvc ball valve (t bay) , 1 "50mm pvc ball valve (t bay) , 2" 63mm pvc ball valve (t bay) , 2" zoloto ball valve , 1 "40mm pvc float valve (t bay) , "15mm c p longbody tap , "15mm c p piller tap , "15mm c p angle valve , 1 " 40mm waste coupling (washbasin) , "15mm c p hex nipple , "15mm extension nipple , "15mm c p two in one tap , flush tank , "15mm health faucet ( tbay) , "15mm c p cup washer , flush tank black boot (ewc bend pipe boot) , flush tank syphon washer , "15mm flush tank float valve , "15mm pvc connection , pvc connection washer(packet) , "25mm saddle ss , 1" 32mm saddle ss , 2"63mm saddle ss , 6mm grip plug (packet) , m seal 50gm , teflone tape , solvent cement (kg) , 1 " concrete nail (packet) , rack bolt , 1 " ss screw (packet) , 1 " 50mm pvc 45 pn 16 , "15mm pvc connection (hot water) , spindle washer (ordinary) packet , 1 " dry wall screw packet , hacksaw blade , trowel medium , hammer in wooden handle 1.5 kg , concrete hole saw 20mm to 63mm , monkey plier /pump plier(10-inch) , steel tape (5 metre)

Central Government/Public Sector

CTN :43290429

12 Jan, 2026 86.44 Lacs

Dipka - Chhattisgarh

Tender For supply of procurement of spares for flowmore make pump - pump shaft part no fm5911 moc astm a 276 ss410 , key for pump half coupling part no fm5912 moc en9 , oil seal de for bearing cover outer de part no fm5913 moc nitrile rubber , counter sunk screw for st cover to suc cover part no fm59110 moc ht steel is 1367 gr 10point8 , external threaded dowel pin for st cover to suc cover part no fm59111 moc ht steel is 1367 gr 10point8 , stuffing box cover part no fm59112 moc 2point5percentage ni ci is 210 fg 260 , pipe plug for stuffing box cover part no fm59113 moc mi , wearing ring for stuffing box cover part no fm59114 moc astm a 743 ss ca 15 , o ring for st box cover to suc casing suc casing to cover plate part no fm59119 moc nitile rubber , cover plate part no fm59120 moc 2point5percentage ni ci is 210 fg 260 , counter sunk screw for cover plate to suc cover part no fm59121 moc ht steel is 1367 gr 10point8 , external threaded dowel pin for st cover to suc cover part no fm59122 moc ss316 , counter sunk screw for partition plate to suc cover part no fm59123 moc ht steel is 1367 gr 10point8 , partition plate part no fm59124 moc 2point5percentage ni ci is 210 fg 260 , external threaded dowel pin for partition plate to diffuser part no fm59125 moc ss316 , diffuser part no fm59127 moc 2point5percentage ni ci is 210 fg 260 , external threaded dowel pin stage to delivery diffuser part no fm59130 moc ss316 , large seating bush for del cover part no fm59136 moc bronze is 318 ltb 5 , counter sunk screw ls bush to del casing part no fm59137 moc ht steel is 1367 gr 10point8 , balance valve part no fm59138 moc bronze is 318 ltb 2 , sleeve nut two no rh 2 no lh thread part no fm59145 moc steel , shaft sleeve nde at balance valve cover part no fm59146 moc astm a 276 ss410 h , key for suction impellor balance valve part no fm59152 moc en9 , key shaft for stage impellor both end round part no fm59153 moc en9 , neck bush diffuser part no fm59154 moc bronze is 318 ltb 5 , wearing ring for st stage partition plate part no fm59155 moc astm a743 ss ca15 , shaft sleeve imp to imp part no fm59156 moc astm a 276 ss410 h , case spacer bushing for cover plate part no fm59157 moc bronze is 318 ltb 5 , water seal ring part no fm59159 moc bronze is 318 ltb 2 , split gland part no fm59161 moc 2point5percentage ni ci is 210 fg 260 , dowel pin for gland part no fm59162 moc en9 , o ring for shaft sleeve part no fm59163 moc nitrile rubber , shaft sleeve de part no fm59164 moc astm a 276 ss410 h , pipe plug for air seal dran filling part no fm59172 moc mi , impeller single suction for second stage part no fm59129 moc astm a 743 ss ca 6nm

Central Government/Public Sector

CTN :43283813

05 Jan, 2026 NA

Mumbai - Maharashtra

Tender For rate contract with oem authorized distributor m/s parikh international llc, usa for rate contract for supply of spares of msi cementing pumps for a period of five (05) years. - diaphragm plate 4"(600/1000hp), seal,diaphragm 4"(600/1000hp)*new, seal diaphragm,4"(600/1000hp), diaphragm seal retainer 4"(600/1000hp), soc hd,1/4”-20*0.50” flat head, gasket power end plunger seal housing (600/1000hp), hex hd,3/8”-16*0.75”, adapter,stuffing box 4",(600hp), lantern ring 4"3sf(600hp), packing set,4” std(600/1000hp), o-ring,4” stuffing box-nut side (600hp)(2-351), par back, 4.0” stuffing box-nut side (600hp)(8-351), packing nut 4.00", (600hp/1000hp), adapter,fluid end 3.25"-4.5"(600/1000hp), plunger 4"(600/1000hp)ss, valve insert 3.25"-4.50"(600/1000hp), seal discharge flange (600hp), diaphragn plate 3.25",(600/1000hp), seal,diaphragm 3.25"(600/1000hp), seal,diaphrgm 3.25"(600/1000hp)*new, diaphragm seal retainer,3.25"(600/1000hp), oil seal pinion shaft (600hp), adapter,stuffing box 3.25"(600hp), lantern ring 3.25"3sf (600/1000hp), packing set,3"std (600/1000hp), o-ring,3"stuffing box fe side, o-ring,3.25"stuffing box-nut side (600hp)(2-345), plunger 3.25" (600/1000hp)ss, packing nut 3.25",(600hp/1000hp), packing set std, 3.25" std (600/1000hp), par-back 3.25-4.5" stuffing box-nut side (600/1000hp), seal,discharge cover 3.25"-4.50" (600/1000hp), valve stop 3.25"-4.50" (600/1000hp), valve complete, 3.25"-4.50"(600/1000hp)novatech, valve spring 3.25"-4.50"72# (600/1000hp) conical, seal,suction cover 3.25"-4.50" (600hp), valve seat 3.25"-4.50"(600/1000hp) novatech, pony rod stud (600/1000hp, o ring, 1.75"adj nut std (2-224 buna90), check valve,1/4" fnpt psig crack pressure , o-ring,3.25”-4.5” stuffing box-f.e. side (600/1000hp), par-back,3.25"-4.5"stuffing box f.e. side (600/1000)hp, adapter fluid end,2.75"-3"(600/1000hp), adpt bdy, 1/4"npt*1/4"npt hex nipple, gauge connection,3.5"-4.5"(600/1000hp), retainer nut,gauge conn, (600hp), discharge cover 3.5"-4.5"(600/1000hp), suction cover 3.5"-4.5"(600/1000hp), discharge flg,2"1502f (600hp), breather (600/1000hp), hose assembly, lubricator (600hp),internal x 16.50", hose assembly, lubricator (600hp),internal x 9.50", hose assembly pinion retainer(600hp) x 9.5", hose assembly pinion cap(600hp) x 15.75", hose assembly lube pipe (600hp) x 7.5", hose assembly bearing cover (600hp)x11.5", tee body, 1/2" npt fff, hose assembly, lubricator (600hp),internal*12", connecting rod bolt,(600 hp), cross head (600/1000hp), hex hd, 3/4"-10*2.00" grade b, stud, 1"-8*3.50" b7, hex nut 1"-8 heavy hex 2h, f-end bold, 12-pt flange hd, 1"-12 x 11"w/rolled thds, f-end bolt, 12-pt flange hd, 1.38"-12 x 10.5"w" w/rd., bearing,connecting rod (600/1000hp), bearing, crosshead pin (600/1000hp), bearing, inside main bearing-fixed (600/1000hp), spacer, (600/1000hp), seal, 2.50" x 3.25" x 375" (for roto seal), bearing, outside main (600hp), inner bearing float (600/1000hp), rotoseal lubricator, crankshaft assy, (600hp), gasketmain bearing housing (600/1000hp), gasket, tech cover (600/1000hp), flange plate gasket, breather port (600/1000hp), gasket, rear cover (600hp) new, crosshead pin, (600/1000hp), wrist pin retainer (600/1000hp), connecting rod,(600/1000hp), blank plug,1/4" npl socket type high press (5000psi), 2300 series check valve 0 to 1000 psig, dowell pin, 3/8" x 1.5", hex nut, 5/8"-11 castellated** special, cotter pin,1/8"x 1.25", crosshead guide (600/1000hp), bearing retainer, inner race (600/1000hp), bearing retainer, outer race (600hp), par-back, 3"stuffing box-nut side (600hp) (8-343), o ring 2.75 & 3 stuffing box fe & 2.75 nut side (2-239)stuffing box nut side, par-back ,2.75 & 3 stuffing box fe & 2.75 nut side 8-239, valve insert, 2.75"-3"(600/1000hp), seal suction / discharge cover 2.75"-3"(600/1000hp), diaphragm seal retainer, 3"(600/1000hp), fluid cylinder,3.25"-4.50"(600hp) , valve-te, 1" x 2" 1502 std 15m, valve-te, 2" x 2" 1502 std 15m, repair kit te 1" std, repair kit te 2" std, valve 1

Central Government/Public Sector

CTN :43285280

12 Jan, 2026 NA

Raigad - Maharashtra

Tender For supply of ss ball valve ( pr no3500002746/25

Central Government And Public Sector

CTN :43018274

30 Dec, 2025 5.64 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : supply of purchase of spare parts for fire protection system c c--hooter 220v dc, l 125mm, b 125mm , hooter 24v dc, l 125mm, b 125mm , push button 10a 415v ac , 1a 250v dc , 1noplus1nc with element switch , selector switch 16a 250v ac, 2 way on and off , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 175degreef for opus , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 190degreef for cable tunnel , 90 degree gi elbow 3 way, 1by2inch bsp, type-heavy duty , 1by2inch ball valve ss, heavy duty, suitable for pressure upto 10kgby cm square , 1by2inch x 1by2inch bsp male female connector, gi material, typeheavy duty , 1by2inch bsp gi tee, type-heavy duty , 1by2inch bsp gi socket, type-heavy duty , 1by4inch bsp thread brass flare male , 3by8inch copper tube , 3by8inch brass nut for copper tube, suitable for item no. 13 , 3by16inch brass screw for deluge valve, length 12mm 100 per packet , 16mm dia. stud, length 200mm with 2 nuts , butterfly valve 4 inch with suitable ms flange , water pressure gauge with mounting for deluge valve 10kgbycm square pressure , water motor gong, suitable for pressure upto 5 kgbycm square, with 1by2inch to 3by 4inch male - male thread adaptor hex nipple of ss , glass for hydrant panel, w 570mm, h 650mm, 5mm thick , glass for hydrant panel, w 240mm, h 420mm, 5mm thick , glass cutter suitable for cutting 5mm thick glass , gasketby rubber beading for glass of hydrant panel, one inch thick , pin type panel key for hydrant panel , qbd bulbs for detection line, bursting temp plus79 degree celcius plus175degreef, dia 1by2 inch , emergency push button, 10a, dia 22mm , toggle switch, 2 way, 2 pole, 10a , 220v dc brass solenoid valve of 1by2 inch dia, suitable for airbywater of 10kgbycm square pressure, normally closed type , hose pipe with nozzle 38mmx 30 mtr for fire protection system ) /bid number: gem/2025/b/6935559 * /dated: 02-12-2025 & & / bid document1 / 23

Central Government/Public Sector

CTN :43306640

13 Jan, 2026 39.71 Lacs

Ganjam - Odisha

Tender For supply of 3pc ball valve, full bore, trunnion mounted, body astm a351 gr. cf3m, ball astm a351 gr. cf3m, seat glass filled teflon, class 600, end connection flanged-rf, operation gear operated , globe valve, body astm a351 gr. cf3m, class 600, end connection flanged-rf, operation wheel operated , 3pc ball valve, body astm a105, ball ss 304, seat ptfe, class 800, end connection screwed-bsp, operation lever operated , butterfly valve, body astm a351 gr. cf3m, disc ss 316l, seat epdm, class 150, end connection wafer, operation gear operated , 2pc ball valve, full bore, floating type, body astm a351 gr. cf8, ball ss 304, seat ptfe, class 150, end connection flanged-rf, operation lever operated

Central Government/Public Sector

CTN :43148788

25 Dec, 2025 NA

Goa - Goa

Tender For corrigendum : supply of mjs seal packing kit , mjs complete seal packing kit , mjs complete valve kit , mjs plunger oil seal , mjs trigger repair kit , mjs repair kit unloader valve , mjs ss water filter

Central Government And Public Sector

CTN :42751482

29 Dec, 2025 NA

Angul - Odisha

Tender For corrigendum : tender for supply of glv(h/o) fcs sw 1500(160) class 50 mm , 4-c1500-glv-bw-ho-wcb , compl.assmbld.v/v-c2500 1 glv-sw-hw-a105 , glv(h/o) fcs sw 2500(160)class size 40mm , full valve c2500 2-1/2 y-hw-wcb , full valve c3000 2-1/2 gv-bw-hw-wc9 , 2500cls 1 globe/stop v/v sw-hw-f22(fas) , glv(h/o) fas sw 2500 class size 50mm , 2500 class fas glv sw ho size 1 1/2 , glv(h/o) fas sw 2500(160) class 20 mm , glv(h/o) ss sc 2500(160) class 10 mm

Flood Control Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors