Latest floor tile Tenders | Government floor tile Tenders

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

State Government

CTN :40475758

31 May, 2025 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For construction of additional accommodation 3 nos. class room with verandh i/c stair case in gsss school dhangota distt. hamirpur (h.p) (sh:- p/l vitrified floor tiles)

State Government

CTN :40475759

31 May, 2025 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For construction of additional accommodation 3 nos. class room with verandh i/c stair case in gsss school dhangota distt. hamirpur (h.p) (sh:- p/l vitrified floor tiles)

State Government

CTN :40475760

31 May, 2025 NA

Lahul And Spiti - Himachal Pradesh

Tender For a/r&m/o executive engineer residence at kaza distt. lahaul & spiti (h.p). (sh: providing & fixing fly proof wire gauze to window and floor tiles in toilet thereof.

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Central Government/Public Sector

CTN :40469405

16 Jun, 2025 9.92 Lacs

East Singhbhum - Jharkhand

Tender For renovation and maintenance of accounts building at turamdih - demolishing brick work , demolishing rcc , repairs to plaster , grading roof , providing and layingapp , pcc 136 , steel reinforcement , rcc 11.53 , shuttering , half brick masonry , brick work , punning , 12 mm cement plaster , putty , flushing cistern , 15 mm cpvc pipe , 20 mm cpvc pipe , ptmt swivelling shower , ptmt bib cock , ptmt stop cock , ptmt pillar cock , mirror of superior glass , glass shelf , vitrified floor tiles , ceramic glazed wall tiles , exterior paint , distemper , synthetic enamel paint , white washing , aluminium work fixed portion , aluminium work shutter , frosted glass , 4 mm thick acp , filling the gap , marine plywood , cup board shutters 25 mm thick , 100mm mortice latch , round shape handle , handles , tower bolts , sliding door bolts , butt hinges , hanging floor door stopper , pvc insulated copper , pvc insulated copper1 , pvc insulated copper2 , 4 module , 6 module , 12 module , switch1 , switch2 , socket1 , socket2 , blanking plate , laminated sheet

Central Government/Public Sector

CTN :40507545

18 Jun, 2025 83.50 Lacs

Jaduguda - Jharkhand

Tender For supply of demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate