Latest flooring laying Tenders | Government flooring laying Tenders

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

Central Government/Public Sector

CTN :40469405

16 Jun, 2025 9.92 Lacs

East Singhbhum - Jharkhand

Tender For renovation and maintenance of accounts building at turamdih - demolishing brick work , demolishing rcc , repairs to plaster , grading roof , providing and layingapp , pcc 136 , steel reinforcement , rcc 11.53 , shuttering , half brick masonry , brick work , punning , 12 mm cement plaster , putty , flushing cistern , 15 mm cpvc pipe , 20 mm cpvc pipe , ptmt swivelling shower , ptmt bib cock , ptmt stop cock , ptmt pillar cock , mirror of superior glass , glass shelf , vitrified floor tiles , ceramic glazed wall tiles , exterior paint , distemper , synthetic enamel paint , white washing , aluminium work fixed portion , aluminium work shutter , frosted glass , 4 mm thick acp , filling the gap , marine plywood , cup board shutters 25 mm thick , 100mm mortice latch , round shape handle , handles , tower bolts , sliding door bolts , butt hinges , hanging floor door stopper , pvc insulated copper , pvc insulated copper1 , pvc insulated copper2 , 4 module , 6 module , 12 module , switch1 , switch2 , socket1 , socket2 , blanking plate , laminated sheet

corporations/Associations/Others

CTN :40491144

11 Jun, 2025 94.0 Thousand

Ranga Reddy-T - Telangana

Tender For providing of custom bid for services - rcc floor cutting pedestal and demolishing work

CTN :40418443

30 May, 2025 11.82 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

CTN :40431255

30 May, 2025 7.11 Lacs

Prayagraj - Uttar Pradesh

Tender For providing essential supply to 1st floor of shiksha nideshalay at agup, prayagraj. - supply of following size cross-linked polyethylene (xlpe) insulated, pvc outer sheathed aluminium conductor armoured cable of 1.1 kv grade conforming to is:7098 (part-i) 1988 amended up to date etc. complete as required. , laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal/dwc hdpe pipe as required. , laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. , above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm ms flat clamp) , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. ,

CTN :40383235

24 May, 2025 18.67 Lacs

Multi City - Multi State

Tender For construction of first and second floor (multipurpose hall) over the canteen and dispensary block in the new land for niftem at thajavur sw.1 constructing rcc framed structure (vertical expansion of 2 more floors) i/c internal water supply and sanitary installation, civil ,external service connection, oht without independent staging and dismantling and demolishing of rcc/brick work etc., sw-2 internal electrical installations, power wiring and plugs fire fighting with down comer system, automatic fire alarm system,13 passengers lift 1 m/s with power operated doors, electrical external service connection, lighting conductor, telephone conduits ,sitcs of vrf system i/c indoor/ outdoor units, piping illuminated signages etc., sh providing interactive display ,lt distribution panel, supply and laying of ug cable.

CTN :40431847

05 Jun, 2025 26.45 Lacs

Multi City - Andhra Pradesh

Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei

corporations/Associations/Others

CTN :40428996

31 May, 2025 3.00 Crore

Junagadh - Gujarat

Tender For yearly rate contract for various items of construction and supply for sutrapada, dist. gir somnath - excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead b dense or hard soil, excavation for foundation for depth to 3.00 to 5.0 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter leadchard murrum, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidatind each deposited layer by ramming and watering, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering., white stone bela masonary block in course in super structure with stone of approved quality in cement mortar 1jem51 cement 5 course sandincluding racking the joint etc. complete., providing laying controlled cement concrete mper200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforce concrete work in r.c.c. slab and landing, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls fpr interior plastering up to floor two level and finished even and smooth with a floating coat of cement slurry. cement mortar 1jem41 cement 4 sand, providing and laying reinforcement for r.c.c. work and bending andplacing in position completed p to floor two level thermo mechanical treated barscrsas per i.s. standard, 20 mm thick sand faced cement plaster on walls up to height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1jem31 cementjem 3 sandand 8 mm. thick finishing coat of c.m. 1jem11 cementjem 1 sandetc. complete., providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1jem31percementjem 3percoarse sandfinishing with flush pointing in white cement.up to 10 ton, providing and laying coloured glazed tiles of the size 300mm x 200mm x 8mm per300mm x 450mm x 8mm in flooring treads of steps landings skirting risers of steps anddado on 10 mm thick cement plaster 1jem31percementjem 3percoarse sandandjointed with white cement slurry., providing and laying 24x 24 vitrified 8mm thick tiles flooring over 20mmaveragebase of cement mortar 1jem61 per cementjem 6percoarse sandon new surface of fixing on existing flooring by adhesive materials including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing andcleaning the surface etc. complete for light shade, providing and laying granite slab in riser of steps dedo and pillars laid 10 mm thick cement mortar 1jem31 cement 3 sandand jointed with grey cement slurry including rubbing and polishing complete, providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1jem3 to plain or slope and to be tempered to bring mortar crme out up to surface using white cement including rounding off junctions and extending them up to 15cm along the wall clearing with water and oxalic acid etc. as directed, providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mmof jindal section nojem4605, wt 1.094 kg perrmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mmof jindal section nojem 8687 wt. of 0.695 kgmt,vertical member of size 61.85 mm x 31.75mm x 1.30 mmof jindal section nojem8758 wt.of 0.0.659 kgpermtwith sliding shutters of horizontal member size 40mm x 18mm x 1.29mmof jindal section nojem 8949 wt. of .456kgpermt, v

Central Government And Public Sector

CTN :40362012

26 May, 2025 NA

Delhi - Delhi

Tender For repairing of tower window split ac - servicing of 1.5, 2.0 tr window a.c. units , installation of 1.5, 2tr window type a.c. in the existing window , repairing and testing of 1.5, 2.0 tr capacity window ac units removal of leakage , replacement of 1 8 hp double shaft fan, blower motor , providing and fixing of 3mm thick ply wood in the existing window , supplying fixing of running capacitor 45 mfd 50mfd , supplying fixing of pcb repairing for remote control , supplying fixing of sitc of new pcb for remote control , supplying fixing of thermostat , supplying fixing of condenser fan blade , supplying fixing of 15,16 amp. pin plug top , supplying fixing of starting capacitor 120 150 mfd , supplying fixing of copper wiring kit , supplying fixing of synthetic filter , supplying fixing of blower for window ac , supplying fixing of selector switches , supplying fixing of starting relay , s fixing of 3 core 2.5 sqmm grade pvc insulated copper flexible cable , replacement of cooling coil 1.5, 2.0 tr window ac unit , replacement of condesnsing coil of existing 1.5,2.0 tr window ac unit , supply fixing of remote hand set , replacement of 1.5 tr capacity rotary sealed compressor , replacement of 2.0 tr capacity rotary sealed compressor , replacement of 1.5 tr capacity reciprocating hermetically compressor , replacement of 2.0 tr capacity reciprocating hermetically compressor , dismantling 1.5tr,2tr window ac unit , dismantling 1.5tr,2tr split ac unit , itc of 1.5, 2.0 tr split ac units at desired location , servicing of 1.5,2.0 tr split a.c. units , repairing and testing of 1.5,2.0 tr capacity split ac unit , replacement of 1 by 8 hp condenser fan motor , replacement of 1 by 4 hp condenser fan motor , replacement of 1 by 35 hp indoor blower motor , replacement, fixing of copper wiring kit , replacement , fixing of condensor fan blade , replacement fixing of pcb repairing for remote control , replacement,fixing of sitc of new pcb for remote control , replacement, supply, fixing of remote hand set , s, fixing 20 mm dia pvc drain pipe in recess , sfixing pvc flexible pipe to cover the refrigerant pipes , pdg. and installing size 22 gauge of 1 4 inch size nominal dia , pdg. and installing size 22 gauge of 5 8 inch size nominal dia , replacement of condesnser coil 1.5, 2.0 tr split ac unit , replacement of cooling coil 1.5, 2.0 tr split ac unit , replacement of existing faulty, unseriviceable 1.5 tr indoor units , s fixing of ms frame a 40mmx40mmx5 mm ms angle iron , b 40mmx5mm ms flat , sfixing of powder coated prefabricated wall floor mounting stand , repairing of inveter type split ac a 1.5 tr inverter sac pcb card , b 1.5 tr inverter sac outdoor motor , c 1.5 tr inverter sac indoor motor , shifting and reinstallation of 3 phase tower type split ac unit , sitc of vaccumization and nitrogen testing a 12.7 mm dia. , b 19.10 mm dia. , sfixing of control cum transmission wiring a 4c x 4 sqmm , sfixing of pvc insulated pvc sheathed copper conductor , sfixing fp sheet steel 25 32 a 415 v c curve fp mcb , minor civil existing brick stone rcc wall having approx. thickness of 1 metre for fixing , providing and filling of refrigerant r 410 r 32 as required gas , pfixing of gi frame tray of 24 guage of size 3feetx1.5 feet , supply and fixing of ac changeover sequence

CTN :40455632

24 Jun, 2025 11.35 Lacs

Gwalior - Madhya Pradesh

Tender For (molik nidhi) construction of c.c road,drain,roof floor,rcc shade and boundry wall work at different places zone no.02 ward no.10.file no.187/25x3/6.

Flooring Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector