Latest flooring wall Tenders | Government flooring wall Tenders

Central Government/Public Sector

CTN :41039043

02 Aug, 2025 1.73 Crore

Jamshedpur - Jharkhand

Tender For raising of boundary wall including construction of retaining walls adjacent to south-east side storm-sewer drain in csir-nml housing complex, agrico for the year 2024-25 and 2025-26.

State Government

CTN :41050607

21 Jul, 2025 58.76 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For construction of guard room and entrance gate, compound wall at front side of annexe guest house campus at carbyn under raj niwas, ae-ii, svpsd.

Central Government/Public Sector

CTN :41040119

01 Aug, 2025 35.00 Lacs

Lucknow - Uttar Pradesh

Tender For certain repairs to joineries with painting incl aluminium work floor and wall tiling work incl wooden flooring wall panelling roofing ceiling plumbing sanitary appliance fittings flooring plastering and heritage finishes etc and bldgs located in z

Central Government/Public Sector

CTN :41056335

02 Aug, 2025 NA

Nashik - Maharashtra

Tender For supply of osaero job work for manufacturing of 228 parts as a package ref semfg604 r - skin-lh(diverter bottom), skin-rh(diverter bottom), splice strip-lh, splice strip-rh, channel-bot-lh(x=5360), channel-bot-rh(x=5360), angle-lh (starb) (lh. shear wallas, angle-rh (stai#8) (r.h. shear wall, a, lh-angle stans) (lh shear wall assy, angle (sta #7) (l.h.shear wall assy, rh-angle (stan9) (rh shear wall assy, angle(star6)-rh (rh shear wallassy, angle (#13-#15) (middle floor assy, angle (sta #15) (shear wall assy #1, frame-lh(sta #7)(x=3325), frame-rh(sta #7) (x=3325), lh-frame (sta#8)(x=3510), lh-side frame top(sta#18 x=5475, side frame top-lh (stan19), side frame top-rh (sta#19), angle-lh(stai#19), angle-rh(staw19), channel, channel, spacer gun bay-o/b (rh) (stan24 to, angle stiffner (top) (stan24 to sta, angle stiffner (top) (stan24 to sta, angle o/b (rh)-gun-bay floor (sta#2, crimped stiffner-o/b (r.h), crimped doubler-bot-rh, channel link floor-rh, stiffener-link chute floor(rh)side, angle(x=6924)(air duct assy.), doubler-lh (#24-#25)(shear wall, doubler-rh (#24-#25)(shear wall, angle (#24-#25) (shear wall assy., angle (#24 to #25) (shear wall assy, angle (#24 to #25) (shear wall assy, gun bay floor sht(stai#23 ?? #24), angle-shear wallista 24 to sta#25), angle-inboard(x=7400 to x=7785), angle-lh(top) air duct, angle-rh(top) air duct, angle-lh(fwd)stub wing(x=6450), angle-rh(fwd)stub wing(x=6450), angle-top skin i/b lh(blk'd assy st, angle-top skin i/b rh(blk'd assy st, angle topskin(lh), angle topskin(rh), angle (blk'd assy sta#25 x=7785), angle-top skin cover(lh), angle-top skin cover(rh), angle o/b rh (shear wall-aft) (sta, angle(top)-rh(x=8975 to x=9355), doubler (sta#34), stringer-lh(x=11690 ?? x=12030), stringer-rh(x=11690 ?? ?=12030), doublerista#33 to star34), doubler o/b-rh side (top cover ass, splice strip-lh (x=10615 to x=109, splice strip-rh (x=10615 to x=109, stringer-top-lh_(sta#33 to sta#34), stringer-top-th_(sta#33 to sta#34), stringer-bottom-lh_(staw33 ?? stan3, stringer-bottom-rh_(sta#33 ?? stan3, stringer-lh(121 o/b from c/l a/b), stringer-rh(121 o/b from c/l a/b), angle-lh angle-rh, angle -lh(65.5 1/b from c/l a/b), angle-rh(65.5 i/b from c/la/b), angle-lh(166 1/b from c/l a/b), angle-rh(166 1/b from c/l a/b), doubler-lh(at stan37), doubler-rh(at sta#37), stringer-lh side (80 below f.r.l), rib-lh (x=10990), angle i/b (lh) (x=10614 & x = 10662 ), angle i/b (rh) (x=10614 & x = 10662 ), angle-top(fwd end)-lh (x = 10614) & x=, angle-top(fwd end)-rh ( x = 10614 & x=, doublerista#36 to sta #37), doubler star#36 to sta #37), doubler, bottom angle (sta #34 to #35), bottom angle (sta #34 to #35), bottom floor-lh_(sta#36 ?? stan37), bottom floor-rh_(sta#36 ?? sta#37), bottom angle-lh_(sta#34 ?? stan35), bottom angle-rh_(sta#34 ?? stan35), bottom angle-lh_(sta36 to stan37), bottom angle-rh_(sta#36 ?? stan37), (x = 10798), rib (x = 11342.95), rib(x=9500), angle p - aft(x = 9700), rib \{x = 9700\}, rib (x = 9960), rib_ (x = 12350) | backup structure ass, angle-aft ( underline x = 12350 ), rib(x=9360), angle top-aft( x = 9500l, angle center, stiffener (sta #33 to sta #34), stiffener-bot (sta #33 to sta #34), diverter cover (sta#21-sta#22), diverter cover (stai21-staji22), side cover (star 24-staii 25)-rh, side cover-lh(sta#23 to sta#24), seal strip(lh door assy-top), seal strip (lh door assy-bott.), stiffener(x=5875), equipment cover-l.h, equipment cover-r.h, fairing plate, fairing plate, fairing plate, fairing plate, nose rib sta #7 (nose box-wing), angle i/b (lh) (x=10614 & x = 10662 ), angle i/b (rh) (x=10614 & x = 10662 ), angle-top(fwd end)-lh (x = 10614) & x=, angle-top(fwd end)-rh ( x = 10614 & x=, doublerista#36 to sta #37), doubler star#36 to sta #37), doubler, bottom angle (sta #34 to #35), bottom angle (sta #34 to #35), bottom floor-lh_(sta#36 ?? stan37), bottom floor-rh_(sta#36 ?? sta#37), bottom angle-lh_(sta#34 ?? stan35), bottom angle-rh_(sta#34 ?? stan35), bottom angle-lh_(s

corporations/Associations/Others

CTN :41052702

05 Aug, 2025 50.00 Lacs

Somnath - Gujarat

Tender For annual maintenance work for pwd branch with material & labours work year 2025-26 - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.ii in cement mortar., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. i r.c.c. work, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying compacted w.b.m. 100 mm. thick of grading i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying cement concrete 1gem3gem6 1 cement gem 3- coarse sand gem6- hand broken stone aggregate 40 mm. nominal size and curing complete excluding cost of form work in gema foundation and plinth, providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete, providing and laying cement concrete 1gem3gem6 1- cement gem 3- coarse sand gem 6- crushed stone aggregates 20 mm nominal size and curing complete including cost of formwork in a wall caps per coping, providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc slabs and landings, providing and casting in situ ordinary cement concrete m-200 forkerbsperkerb blocks including formwork, curing and finishing complete., providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level, white stone bela masonry block in course in foundation, plinth and super structure with stone of approved quality in cement mortar 1gem5 1cement gem 5 course sand including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 gem 4 course sand, providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. ii cement mortar 1gem4 1 cement gem 4 sand, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls for interior plastering up to floor two level and finished even and smooth including fini

State Government

CTN :41046460

19 Jul, 2025 2.52 Lacs

Visakhapatnam - Andhra Pradesh

Tender For providing boundary wall at shivajipalem back side of women engineering college mess, north campus au vsp.

State Government

CTN :41051765

28 Jul, 2025 7.32 Lacs

Alipurduar - West Bengal

Tender For construction of drain wall starting from near the house of chandan chakraborty towards east up to 50 mtr both side and 01 no slab culvert and c c road starting from near the house of chandan chakraborty towards east then north up to lt anil sutradha

State Government

CTN :41051774

28 Jul, 2025 7.58 Lacs

Alipurduar - West Bengal

Tender For construction of c c drain starting from near the house of liptan dey towards west up to chandan mazumder up to 110mtr and one side drain wall starting from near udoybitan club towards west up to 110 mtr in ward no viii under alipurduar municipality

CTN :41055134

02 Aug, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of ceramic western commode 660mm 380mm 740 mm with seat cover make parryware or hindware or cera , pvc cistern of ten ltr capacity complete make parryware or hindware or cera , ceramic wash basin 450 mm make parryware or hindware or cera , stainless steel jet with connection health faucet 25 mm dia make prayag or cera or hindware , looking mirror 500 mm x 350 mm x 6 mm with fitting of make saint or gobain or prayag alongwith plastic cabinet , cp towel rail of 609 mm with fitting make parryware or prayag or cera , stainless steel curtain rod 1828 mm with fitting make jindal or tata or sail , plastic curtain 1828mm x 1524mm with ring , cp shower complete set with 300mm long make cera or prayag or hindustan , cp wall mixer with fitting make cera or prayag or hindustan , led 18 watt with ceiling light make havells or bajaj or syska , led tube rod 18 watt make havells or bajaj or syska , bulk head 20 w make havells or bajaj or syska , toilet paper holder make prayag or cera or hindustan , water tank 500 ltr cubical type make sintax or apollo or supreme , cp soap dish make hindustan or cera or prayag , cp two way bib tap 15mm make prayag or cera or jainco , cp angle cock 15mm make prayag or cera or jainco , cp pillar tap 15mm make prayag or cera or jainco , motor 0.5 hp alongwith booster pump and necessary plumbing make kirloskar or crompton greaves or hindustan , 32 amps double pole mcb alongwith gang box make schneider or leygrand or havells , pvc exhaust fan 300 mm x 300 mm make bajaj or khaitan or crompton or greaves , switch board 2 way make havells or rico or anchor , switch piano type 6 amp make havells or rico or anchor , switch socket 16 amp make havells or rico or anchor , sewage disposal as per tech specification and drawing att in rfp tank make of steel jindal or tata or sail , wire 10 sqmm 2 core aluminium make havells or polycab or anchor , fabrication and supply of modified two men mob fd toilet one side platform as per technical specification and drawing attached in rfp

CTN :41060297

02 Aug, 2025 NA

Secunderabad - Telangana

Tender For name of work : procurement of essential lifesaving ortho caonsumables, medicines & medical gases - 2.7 mm/3.5 mm titanium lcp superior anterior clavicle plate with lateral extension with 6 locking option laterally (6-8 holes ,side specific) with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm low profile lcp superior anatomical clavicle plate (titanium) 06-10 holes, right/left with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm locking compression extra-articular distal humerus plates 6 - 14 holes ( left /right) titanium , with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm lcp olecranon plate titanium (6-10 holes) (left/ right) with compatible locking and cortical screws for all holes (usfda/ce approved), modular side locking radial head prosthesis (head size 18-28 mm ) with uncemented fluted stem(6mm-10mm) (usfd /ce approved), 2mm titanium locking compression plate, 3-6 holes with compatible locking and cortical screws for all holes (usfda/ce approved), precontoured 3.5 mm pelvic reconstruction locking plates 6-14 hole with compatible locking and cortical screws for all holes (usfda/ce approved), spring plate for acetabular wall fixation 3-5 hole with compatible locking/ cortical screws for all holes (usfda/ce approved), titanium femoral neck plate fixation system with compatible hip bolt, antirotation screw,locking screw for plate (complete set) (usfd/ce approved), intramedullary interlocking femoral nail (usfda/ce approved) 9mm-11mm x 360-420 mm trochanteric entry titanium (left/right) with 2 proximal and two dital locking screws with compatible end cap, distal femoral/supracondylar nail (titanium) 9mm-11mm x 300-360 mm with two matching proximal and two matching distal locking bolts/screws (usfd/ce approved and mri compatible), titanium reamed cannulated interlocking nail tibia(usfda/ce approved) 8 -10 mm diameter,270-360 mm length ,side specific , 5 locking option proximal and 3 locking option distal end of the nail with compatible locking bolts for all holes, titanium tibial opening wedge osteotomy plates (all sizes) with comaptible 4.5mm cotical and 6.5 mm locking screws, (limb reconstruction system )rail fixator complete set for tibia/ femur (including standard clamp,angular correction clamp,translation clamp,acute correction clamp,ring adapters, dynamization component,compression distraction unit with compatible ha coated half pins), ha coated ss self drilling schanz screws ranging from size 3.5mm - 6mm , 80-200mm length, 3.5 mm titanium self tapping cortical screws,all sizes, 3.5 mm titanium locking self tappig screws, all sizes, titanium flexible elastic nail size ranging from 1.5-4mm diameter, length 300-440mm, expert tibial nail of 9mm (titanium) dia with 3 innovative locking optionin combination with 5mm cancellous bone screw and 4mm 4 locking option in distal part.(compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be usfda/eu-ce/bis standard compliant., locking compression plate 3.5mm (titanium) 6-10 hole with compatible locking and cortical screw for all holes (usfda/ce approved), jess fixator (small/medium/large)link joints -20 small connecting rod, dia : 2.5mm, length : 100 mm - 02 connecting rod , dia : 2.5 mm, length : 200 mm - 02connecting rod, dia : 2.5mm, length : 150 mm - 02l rod, dia : 2.5 mm (four)z rod, dia : 2.5 mm (two) distractor, double hole, length : 150 mm (two)distractor, double hole, length : 200 mm (two)k. wire, dia : 1.5 mm x 150 mm (four)k. wire, dia : 2.0 mm x 150 mm (two)foot plate - 01allen key 2.5 mm - 01, 5.5mm suture anchor with one ultratape and one #2 ultrabraid suture, femoral cortical suspension device (titanium) with self adjustable loop length(knotless locking system) made of continuous polyester/continuous fiber/braided polyethylene with two braided polyester sutures for arthroscopic acl reconstruction using sof

Flooring Wall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors