Latest flue gas Tenders | Government flue gas Tenders

corporations/Associations/Others

CTN :44328348

29 May, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : ennore sez - establishment of flue gas desulphurisation (fgd) system and its auxiliaries for 2 x 660 mw ennore sez under single epc basis. - engineering, procurement and construction (epc) contract for complete design, engineering, manufacture/procurement, assembly, inspection, testing at manufacturer’s works, packing, forwarding, transporting and insurance, supply of complete machineries (complete mechanical, electrical, instrumentation & control systems and civil, structural & architectural works and mandatory spares at site), assembly, erection, testing, commissioning, trial/ reliability run, conducting performance guarantee tests and handing over of flue gas desulphurisation system and auxiliaries for 2 x 660mw ennore sez supercritical thermal power project at ash dyke of nctps, , tamil nadu.

corporations/Associations/Others

CTN :44348671

28 Apr, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : tangedco nctps i 3x210mw installation of semi dry flue gas desulphurization system - tangedco – nctps-i–(3x210mw) – installation of semi dry flue gas desulphurization system complete design, engineering, manufacture / supply, inspection and testing at supplier’s works, packing, forwarding to site, transportation, unloading, storage, preservation, insurance, handling at site, pre-assembly, assembly, erection / supervision of erection, final painting, start-up, pre-commissioning, testing & trial run, commissioning, performance guarantee testing and warranty of fgd system up to completion of warranty period, training of purchaser’s personnel for complete fgd equipment / system covering all mechanical, electrical, c&i, associated steel structure, civil & architectural works for semi dry flue gas desulphurization system in all units of3 x 210 mw steam generators with complete associated auxiliaries, accessories and other related items of respective work for the complete fgd plant and equipment on turnkey engineering, procurement and construction basis, necessary for putting into operation, a highly reliable, safe, efficient and environmentally compliant fgd plant in order to reduce the sox emission to comply the new environmental norms in 3x210mw units of nctps i, athipattu, tiruvallur dist., tamil naduunder single epc basis.

corporations/Associations/Others

CTN :44376209

05 May, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : engineeringprocurement and construction epccontract for complete design engineering manufacture - tangedco – nctps-ii–(2x600mw) – engineering, procurement and construction (epc) contract for complete design, engineering, manufacture/procurement, assembly, inspection, testing at manufacturer’s works, packing, forwarding, transporting and insurance, supply of complete machineries (complete mechanical, electrical, instrumentation & control systems and civil, structural & architectural works and mandatory spares at site), assembly, erection, testing, commissioning, trial/ reliability run, conducting performance guarantee tests and handing over of flue gas desulphurisation system and auxiliaries for 2x600 mw north chennai thermal power station-ii, chennai-600120, tamil nadu.

CTN :44768443

16 Apr, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of c12m260020 - 1389910048 - flue gas bypass - obsg stack 206-hv-2801 , 1398051828 - complete guillotine valve in inlet duct , 1398051834 - complete guillotine valve in outlet duct , procurement supervision charges

CTN :44770629

15 Apr, 2026 85.7 Thousand

Baran - Rajasthan

Tender For supply of spare parts of portable flue gas analyzer make/model- kane 988 at dm plant lab, 2x660 mw csctpp, chhabra

State Government

CTN :44771229

28 Apr, 2026 NA

Manuguru - Telangana

Tender For supply of printing stationery items for use in various circles of btps - 220kv ict, bus and line sf6 gas oressyre oaraneters, 3.5 meter switch gear room parameters, unit-i, 3.5 meter switch gear room parameters, unit-ii, 3.5 meter switch gear room parameters, unit-iii, 3.5 meter switch gear room parameters, unit-iv, ac plant parameters, agreement register,200 pages, anion exchanger book,200 pages, battery charges @ ahp, battery charges @ mcr, unit-i battery charges, unit-ii battery charges, battery charges unit-iii, battery charges unit-iv, battery log book, chemical bills register 200 pages, "bin cards , 210x170mm with suitablecover w/tsgenco logo", boiler feed & steem analysis book,200pages, chemical analysis, chemical bunker coal analysis register, 200 pages, bus and line parameters, casual leave form book,100pages,size:1x8, cation exchanger book,200pages, chemical raw water analysis register 200, pages, register,cloth bounded,100pages, cloth register bounded 200 pages, register,cloth bound,300pages, cmd parameters, chemical combustibles in ash analysis, register 200 pages, chemical compliant register 200 pages, chemical consumable register 200 pages, chemical consumption register 200 pages, register,cooling tower water analysis,200, pages, cw pump house parameters, register daily bulk chemical, consumption 200 pages, register,ruled,100pages, register 200 pages deluxe, register 300 pages deluxe, book,devolution(1+2),50pages, chemical d.m.plant water analysis, register 200 pages, chemical d.m.effluent analysis register, 200 pages, duty mounting & dismounting register with duplicate, emergency works approval register, equipment history register, 11 esp control room parameters, book,fcr,100pages, estimate register, fd fans local parameters, file backer, chemical flue gas analysis 200 pages, foph parameters, fote counter @ mcr, generation transformer (gt)-ii, parameters, generation transformer (gt)-i parameters, generation particulars, gt# 3 parameters, gt# 4 parameters, gt,st & uat's parameters, id fans local parameters, chemical indent register 200 pages, inward register, 200 pages, register,inward material,500pages, book,mb exchanger,200 pages, material movement register, measurement book, measurement books (200 pages 80 gsm, ledger paper/size - 7" x 8 1/2" with, straw board on top logo with tsgenco, printing), mills local parameters, logbook,motor lorry,300pages, dispatch-out ward registers - 300 page, pa fans local parameters, petty cash book, register,pulverise coal analysis,200pages, book,pump&motor parameters,3x31pages, register,purchase,100pages, register,raw water & clarified water, analysis,200 pages, register,material returnable,300pages, register,ruled,200pages, stores issued book, stores received book, sentry relief book,a4, sf6 gas pressure parameters, book,shift log,300pages, logbook, soot blowers ,each book of 100, page (1 page /set, 100 sets), single side, thick, bound, legal size, spares register, station transformer - ii, station transformer (st)& bus reactor, pparameters, register,t&p,200pages, register tappal delivery,200pages, register,tender notice,200 pages, register,tender opening,200 pages, register,tender schedule sold,200 pages, tender specification booklet contract, containing 10 pages, printed on both sides, of pages (a4 size), chemicl register of tools and equipment, 200 pages, book, transformer yard parameters,, 3x31pages, transport notebook in quatriplicate, usr books with bound with triplicate, receipts (50 pages), unitit perameters (fw), unitit perameters (sg), unitit perameters (tg), register,vehicle movement,200pages, book,trip sheet,triplicate, work allocation register, fcr book,200 pages, boiler local parameters

CTN :44757118

23 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur furnace , makin

Central Government/Public Sector

CTN :44759120

15 Apr, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For erection and commissioning of electrical and c and i works for fgd at north chennai stage ii - erection, testing and commissioning and trial operation including supply and application of final painting and handling of materials at site bhel stores / client stores/ storage yard, transporting to site of erection of electrical, c&i works for flue gas desulphurization (fgd) system at 1 x 800 mw north chennai thermal power plant stage-iii, chennai.

Central Government/Public Sector

CTN :44760248

20 Apr, 2026 NA

Katipala - Karnataka

Tender For tender for supply of 3410000172 expansion bellow : - exp.joint , 2014x2014-100mm w , ej18fg1 , complete assembled unit with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per drawing no. kem.0160.03. , exp.joint , 2874x2874-100mm w , ej19fg2 , complete assembled unit with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per drawing no. kem.0160.03. , exp.joint , non metal.2472x3366-100mm w , ej20fg2 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.03 , flue gas non metallic expansion joint bellow-ej 22 fg4/ej 23 fg4/ej 24 fg5/6 , complete set with bellows , fabric , bolester , baffle plates , flanges , fastners etc as per dwg kem.0160.03 , 2544x2544 , l100mm , s200mm , flue gas non-metallic expansion joint bellow - ej 25 fg7 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.03 , 3314 x3314 , l 125mm , s 225mm. , flue gas non metallic expansion joint bellow-ej 26 fg7 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.03 , 3314 x3314 , l 150mm , s 250mm. , hot air non metallic expansion joint bellow-ej 04 ha2 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.01 , 2384 x 2384 , l 100mm , s 200mm. , exp.joint , non metal.2082x2082-125mm w , ej05ha3 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.01. , hot air non metallic expansion joint bellow- ej 15 ha7 , complete set with bellows , fabric and bolester , baffle plates , flanges and fastners etc as per dwg kem.0160.02 , 1052 x 2252 , l 100mm , s 200mm. , nonmetallic expansion joint -gb1001 discharge complete with bellows , baffle plates , fastners etc. size 1800x1400x330mm , & drg(no. e g3-apc-940092-2 , hot air non metallic expansion joint bellow fabric and bolster- ej 16 ha7 , open belt without bolt holes punched , dimension 1052 x 1 452 , l 100mm , s 200mm , dwg no kem.0160.02 , exp.joint , non metal(only bellow) , 1264 x 3264 - 100mm , as per drg 01 , exp.joint , non metal.2082x2082-125mm w , ej07ha3 , exp.joint , non metal.1996x1996-100mm w , ej01ca4 , exp.joint , non metal.1824x1824-150mm w , ej06ha3 , exp.joint , non metal.1552x1552-150mm w , ej12ha5 , exp.joint , non metal.1552x1552-125mm w , ej13ha5 , exp.joint , non metal.1264x3264-100mm w , ej02ha1 , exp.joint , non metal.1152x2112-100mm w , ej09ha4 , exp.joint , non metal.1152x2082-100mm w , ej10ha4 , hot air non metallic expansion joint bellow fabric and bolster- ej 08 ha4 , open belt without bolt holes punched , dimension 1152 x 1 732 , l 100mm , s 200mm , dwg no kem.0160.01 , exp.joint , non metal.1052x2952-150mm w , ej14ha6

State Government

CTN :43754273

22 Apr, 2026 NA

Multi City - Telangana

Tender For corrigendum : extractive ndir (non-dispersive infrared) type flue gas analyzers required for continuous emission monitoring systems installed at ktps v and vi stages stacks

Flue Gas Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government