Latest fluid heater scrap Tenders | Government fluid heater scrap Tenders

CTN :40508238

18 Jun, 2025 NA

Kamrup - Assam

Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs

CTN :40513009

06 Jun, 2025 15.00 Lacs

Jodhpur - Rajasthan

Tender For supply of lab equipment - lab equipment, microscope with camera : should have observation method including brightfield and darkfield, should be illuminated with transmitted illuminator and led lamp, should have stage focusing mechanism with coarse handle stroke of 15 mm, should have features for coarse adjustment limit stopper and torque adjustment for coarse adjustment knob, should have field trinocular diaphragm, should have revolving nosepiece with manual with 4 standard positions , should have manual stages with right-hand control having built-in x: 76 mm, y: 30 mm, should have built in manual abbe condenser na 1.25/ w.d. - (4x 100x), standard (fn20) observation tubes-trinocular should be included, should have 30 tube inclination angle or equivalent, trinocular tube light path selection (camera: observation) :0%:100%, 100%:0%, should have interpupillary distance adjustment: 48 75 mm, dimensions (w d h): trinocular: 198 (w) x 398 (d) x 430 (h) mm, weight should be not more than weight: approx. 6.5 kg, compact design, should be supplied with 15 mega pixel or more camera attachment and computer to visualize sample, should be supplied with dust cover complete set. with c-mount stand, camera, computer, should have microscope camera software and image processing system, computer system should contain desktop (minimum 12th gen intel core i3, ram minimum 8gb, windows 11, ms office 2021, wi fi 6, bluetooth 5.2 monitor minimum 18 inch and above, fhd, ips display, eye comfort), keyboard and mouse for operating microscope, service and operation manuals to be provided; warranted for 1 years or more after satisfactory installation., magnification lens with light: magnifier is made of high quality glass. white energy-efficient led bulbs. the glass lens magnification 3x to 45x magnification. the large lens diameter 87 mm handle length 4.1 inch, digital weighing scale: electronic balance should have the following functionality, upto 220 g capacity; 0.001 g readability; brilliant display; internal calibration; robust construction; easy levelling; maximum capacity: 220 g, minimum load: 10mg, readability: 0.1 mg or better, settling time: 6 s or better, adjustment: internal, display: backlit lcd, weighing pan size: upto 90 mm , micro processed based digital display with on/off mode, build with die-cast aluminium material, should have adjustable feet for uniform levelling. should be iso, ce certifiedshould provide user, technical manuals to be supplied in english language, it should have interface rs232, service and operation manuals to be provided; power supply: ac 230v/115v,50/60hz, warranty -1year or more, authorization letter, hot air oven : double walled unit with inner chamber of stainless steel, outer chamber of mild steel duly powder coated. temperature thermostatically controlled range: 50 c to 200 c 1 c. beaded heating elements are placed in the ribs at the bottom and sides mineral /glasswool insulation, capacity: 200ltr or more, corrosion resistant body for longer life, air circulation fan for better heat circulation and dry of sample, complete with l shape thermometer, two indicators, thermostat and on / off switch, microprocessor based pid temp. controller cum indicator, adjustable selves: 2 or more, inner dimensions: 600 x 600 x 600mm or more, it should have concealed ss handle and positive latch system. controller should be equipped with timer, auto tuning and alarms. supply voltage: 230 v ac, 50 hz, single phase. should have local service setup for prompt and efficient post-sales support. warranty 1 year or more, muffle furnace: unit should be suitable for laboratory, it should be fitted with good quality tiles set, with ceramic fibred insulation. unit capacity: 4 litre or more, outer casing of thick mild steel duly painted / powder coated. working temperature ranges from 50 c - 1150 c is controlled by digital temperature cum indicator with e. r. control device for fine control. dimension should be compact: 125 x 125 x 250 mm, u

corporations/Associations/Others

CTN :40032583

04 Jun, 2025 NA

Parichha - Uttar Pradesh

Tender For corrigendum : supply of refractory material for 2x250 mw ptpp parichha - refractory supercastable alumina 68-72%, super castable refractory as per following specification:al2o3:68-72%, cao:5.2-6%, fe2o3:4.8-5.5%, max service temp:1450 c, max grain size:5mm, water required for casting:10-11%, dry density:2.50-2.65 g/cc, (after drying at 110 c/24 hrs), ccs:350-450 kg/cm2( after drying at 110 c/24 hrs) refractoriness, orton/ c plc, % (after heating at 1100 deg c/3hrs: -0.30 to +0.30) after heating at 1400 deg c/3 hrs: -1.60 to +1.70), plastic refractory as per following specification:al2o3:82.5-85.5%, fe2o3:0.50-0.85, max service temp:1700 c, max grain size:3mm, pre-8 liquid for ramming:9.7-10.7%, dry density :2.70-2.85 g/cc, (after drying at 110 c/24 hrs), ccs:260-430 kg/cm2( after drying at 110 c/24 hrs) refractoriness, orton/ c plc, % (after heating at 550 c/3hrs: -0.3 to +0.3) after heating at 815 c/3 hrs: -0.3 to +0.3)

Central Government And Public Sector

CTN :40267023

05 Jun, 2025 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of puf panel 60mm thick for wall,gi based corrugated steel sheet 0 point 60mm thick,puf panel 40mm thick for false ceiling,hollow steel iron,anlge iron,nut and bolt,earthing,lightening arrester,main door,toilet door,window,ventilator,curtain rod,fire extinguisher ball auto fire off 1kg 300gm along with its accessories,01 x puf insulated tank 1000 ltr capacity,electrically operated water heating device vertical type 25 ltr,ug frp bio digester septic tank 2000 ltr complete with all fittings,sealing material,weather proof exterior emulsion paint,sds 1 inch full thread,sds 3 inch full thread,sds 4 inch full thread,ordinary portland cement grade 43,coarse sand,stone aggregate shall be crushed stone 20mm graded,stone aggregate shall be crushed stone 40mm graded,stone aggregate shall be crushed stone 63mm graded,stone aggregate shall be crushed stone 10mm graded,vitrified tiles 10 or 12mm thick square matte finish,precast rcc slab,dressed and squared rubble stone,20 watt led tube rod and all neccessary fittings,bulk he

CTN :40469606

13 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete store and contruction material for living frp hut - cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse , crushed stone aggregate 40mm graded , crushed stone aggregate 20mm graded , rr stone , hard core of broken stone aggregate of size 45 to 63 mm , foundation bolts ms galvanised alongwith nuts and washer 450mm long and 12mm dia , foundation brackets ms 210 x 150 x 100mm , bolt ms galvanised m10 x 50mm with nuts and double washer 2mm , bolt ms galvanised m10 x 120mm with nuts and double washer 2mm , bolt ms galvanised m10 x 100mm with nuts and double washer 2mm , bolt ms galvanised m10 x 75mm with nuts and double washer 2mm , bolt ms galvanised m10 x 125mm with nuts and double washer 2mm , double bunk of size 1800mm x 900mm , mattress 1800mm x 900mm with two layers each 50mm thick , fire extinguisher 06 kgs abc dry powder stored pressure type , automatic ignition kero room heater fuel tank capacity 18 ltr with fuel indication gauge , large steel almirah half hanging of size 1985 x 920 x 485mm 1 point 0 mm steel body , water dispenser hot cold and normal water 20 ltr capacity with jar of 20 ltr , detachable rack 400mm x 125mm , tarpaulin plastic film water proof cover size 30 x 30 colour og , solar hand held lantern light , lightning conductor and earthing made of copper tube150cm x 25mm dia with five copper prongs of length 15cm , fd water heating eqpt solar or k oil based with 500 ltr tank capacity , solar street light 25w including pole having length 5 mtr long , complete set of repair kit packed in one steel box with lock and key , 20w led tube light fitting 230v , bulk head fitting with 9 watt led bulb , moduar switch socket combine 15 amp , moduar switch socket combine 5 amp , pvc casing and capping of size 25 mm , pvc casing and capping of size 25 mm tee , pvc casing and capping of size 25 mm elbow , pvc casing and capping of size 25 mm common for joints , wire single core copper conductor 1 point 5sqmm , star headed screws 1 inch , mcb 10 32 amp sp , elect wire two core copper conductor 6 sqmm , elect wire 2 point 5 core copper conductor , ceiling rose 2 to 3 terminals , change over switch 32 amp , pvc pipe 110 mm dia x 20 long , cgi sheet 3000mm x 900mm x 22 , gi pipe 50mm dia and 2400mm , frp iwc with foot rest and s or p trap , pvc bend 110 mm dia , pvc tee 110 mm dia , pvc p trap 110mm , pvc socket 100mm dia , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe pn 16 sdr 7 point 4 and 3 layer 20mm , ppr pipe pn 16 sdr 7 point 4 and 3 layer 32 mm dia , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , long body bib cock chromium plated 15mm dia , ppr wall clamp dia 25mm , hdpe pvc water tank 1000ltrs , pre fabricated tank staging ms angle iron frame of size 1 point 50 x 1 point 50 x 2 point 50 mtr , silicon gun machine for applying silicon tube with isi mark , silicon tube 200gm , reinforced nyloguard 9 point 00 x 9 point 00 mtr , adhesive sr 998 , drilling machine , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 , screw driver make , screw driving machine make , self supporting aluminium step ladder 6 height , trawal brick 250mm , plier side cutting , phawarh 915mm with wooden handle , shovel hand gs 12 1 point 6 kg with fibre handle , measuring tape 5mtr retractable

CTN :40474614

30 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For repair, heating, varnishing, replacement of driving and non-driving side bearings, cable jointing, proper alignment with pump and testing work of compton make ht motor, 11 kv, 1500 kw of pump set number-1 installed at gyanpur pump canal head. (including all material, labour and necessary equipment) (detailed details as per bill of quantity)

CTN :40474616

30 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For repair, heating, varnishing, replacement of driving and non-driving side bearings, cable jointing, proper alignment with pump and testing work of compton make h.t. motor, 11 kv, 1500 kw of pump set number-5 installed at gyanpur pump canal head. (including all material, labour and necessary equipment) (detailed details as per bill of quantity)

CTN :40474619

30 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For repair, heating, varnishing, replacement of driving and non-driving side bearings, cable jointing, proper alignment with pump and testing work of jyoti make ht motor, 11 kv, 1500 kw, pump set number-10 installed at gyanpur pump canal head. (including all material, labour and necessary equipment) (detailed details as per bill of quantity)

Co-operative

CTN :40497458

06 Jun, 2025 NA

Ghatampur - Uttar Pradesh

Tender For competitive e-bidding for supply refactory material for year 2025-26 - description, special fire bricks for furnace is-08 above 45% alumina as per drg., fire cement dry, fire clay morter above 45% al., fire crete castable, calcium silicate bricks 600x150x50mm, standard fire bricks, insulation bricks, fire crate castable acco set 50 super suncast make refractory 55% alumina pack in 50kg. bag suitable for heating resistance 1200 0c

Central Government/Public Sector

CTN :40502223

16 Jun, 2025 NA

Roorkee - Uttarakhand

Tender For manpower outsourcing services and supply of material for operation and maintenance of electrical installation in zone-1, solar pv and solar heating system at iit roorkee campus

Fluid Heater Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Co-operative

Central Government/Public Sector