Latest foldable stretcher Tenders | Government foldable stretcher Tenders

corporations/Associations/Others

CTN :38598243

26 Dec, 2024 NA

Madurai - Tamil Nadu

Tender For erection of 3 no single pole mounted dt structure under tf iv tatkal scheme kottampatti section

corporations/Associations/Others

CTN :38598244

26 Dec, 2024 NA

Madurai - Tamil Nadu

Tender For erection of 2 no single pole mounted dt structure eos to 3nos agri service under tf iv tatkal scheme kottampatti section

Central Government And Public Sector

CTN :38605270

23 Dec, 2024 NA

Lumding - Assam

Tender For supply of 1) auto-pointing reflector-less electronic total station, auto-pointing of 1000 mtrs, colour lc d touch screen dual face display, 0.5 second least count and 1 second accuracy, capable of measuring ap proximate 1000 mtrs in reflector-less mode and approximate 6 kms under good weather conditions with sin gle prism, with an accuracy of (1 mm + 2 ppm xd) in prism mode, internal memory of 1 gb, with data interf ace such as usb flash memory for pen drive and usb type mini b port, guide light unit to assist in quick s etting out, graphical display of surveyed points, comes along with the following accessories: (i) main unit. ( ii) rechargeable batteries x2. (iii) quick charger with power cable, stylus, lens hood, lens cap, (iv) tool kit operations manual and carrying case. (v) pen drive. (vi) company original calibration certificate & warrant y card. 2) wooden telescopic tripod. 3) single range pole assembly, consisting of prism, single tilting mou nt with co-axial target, telescopic range pole, range pole level and all in soft carrying case. 4) range pole tr ipod for prism. model-ix-601 of make sokkia or similar. [ warranty period: 30 months after the date of deli very ]

CTN :38567872

19 Dec, 2024 NA

Gorakhpur - Uttar Pradesh

Tender For supply of toggle switch single pole one way on-off 15 amp, 250 v ac/dc with fuse hol der suitable for glass fuse 1 amp 250 v size (6.33 x 26) mm 01 no. as per drg no- icf/sk-7-4- 002 col iv, item no-01 [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :38526352

25 Dec, 2024 NA

Kanyakumari - Tamil Nadu

Tender For : works contract for execution of providing 1.eos to 4 no oht service the executive officer puthalam at ex. palkulam ss i 250 kva and proposed 1 no new 63 kva dt under themgamputhoor section. 2.eos to 1 no indl iii b thiru. p.saravanan at muhilanvilai under keezhakrishnanputhoor section.3.dcw estimate for deviation of ht line with 7/3.35 acsr at loc pole no . ety - 636 to knr -642 as per the request thiru. t.vijay kumar, karthigaivadali at poochivilagam ss -iv , 25 kva in dhaarmapuram feeder under eathamozhy section. in c&i nagercoil section under nagercoil division in kanyakumari electricity distribution circle.

CTN :38488724

28 Dec, 2024 NA

Jalandhar - Punjab

Tender For supply of lv7/t-815(4x4) 10324673 358-821-001-000 electromagnetic valve erchem iv- 24 v, lv7/maruti 10439744 33705-80c00 cord set high tension, lv7/t-815 10311975 443-612-164-012 brake cylinder dia 100mm, lv7/t-815(4x4) 10328433 990-301-092-000 cross pin gkn 700 228, lv7/t-815 10317148 319-232-100-0 piston ring minute type er 120/246 d , lv2/icvs 10259288 675-60sb-123 seat back cushion, lv7/t-815 10341449 443-811-445-540 switch, lv7/itr/beml 10322346 50-62-85 clamp 69 x 20 (lot 2), lv7/t-815 10333454 413-312-516-176 cranked de ring spanner 16x17, lv7/itr/beml 10319041 50-224-13 mud flap rh (lot 2 to 4), lv7/t-815 10342871 443-857-044-002 seven pole socket, lv7/t-815 10333345 413-323-009-900 tubular box spanner, lv7/t-815(4x4) 10324851 336-900-058-000 pneumatic cylinder technomatik 5643.2395, lv7/t-815 10331176 443-612-370-802 closing cock, lv7/t-815 10322483 131-854-084-001 push button switch, lv7/itr/beml 10321628 5310-006458 slotted hex nut m 20 (for lot 2 to 4), lv7/kol 10354418 f1-5120-003036 single ended spanner

corporations/Associations/Others

CTN :38473746

27 Dec, 2024 NA

Nadiad - Gujarat

Tender For tender for supply of rc 51 electric iteam - battery terminal -positive , battery terminal -negitive , tail light assy lh , tail light assy rh , blinker glass side light lh , blinker glass side light rh , reflective assy with flate lence & parking sutable , tail light led assy lh , tail light assy rh , starter push switch button for ele horn , flasher switch , double lever combination switch , three pin pvc adepter with cable for p43t type , switch cab main isolator , isolator switch ele single pole 24v ley-iv , heavy duty m.s.door lock for passsenger door of bus body with handle side- l.h. the lock should be made of 2.0mm (14g) m.s.sheet should spring oprated with suteble m.s handle made from c.i and it should be bolted with door lock.(1)handle should have length of 12mm thicness of 9mm width of 20mm may be provided. (2) the approx overall diamension of the lock will be (a) length 150mm (b) width 115mm (c)thicness 17mm(3)the door lock square hole for door lock handle should be 8mm-8mm , heavy duty m.s.door lock for passsenger door of bus body with handle side- r.h. the lock should be made of 2.0mm 14g m.s.sheet and should spring oprated with suteble m.s handle made from c.i and it should be bolted with door lock.(1)handle should have length of 12mm thicness of 9mm width of 20mm may be provided. (2) the approx overall diamension of the lock will be (a) length 150mm (b) width 115mm (c)thicness 17mm(3)the door lock square hole for door lock handle should be 8mm-8mm , a jobber series twist drill tool type n-for right hand cutting and made form high speed steel twist drill as per is-5101 size-13-64 -5.1mm , petrolium jelly- 1 kg packing , valve cap , lazy tong , hand operated riveting tools , (a)suitable to rivet aluminium alloy blind (pop) rivets size -4.8mm (b) the linkages should be of steel and outer body should be bronze , p.u base sealent kit suitable for bonding glass with metal(m.s/alluminium) consisting of following items .p.u base sealent tube (black) each 600ml in quantity of 5 nos

corporations/Associations/Others

CTN :38452453

18 Dec, 2024 NA

Multi City - Multi State

Tender For auction sale of teak -v-poles,teak- iv b- timber,teak poles-iv,teak pole v,teak pole iii,teak pole ii,teak pole iv,teak poles-v,timber iv,teak pole ii c,teak pole v c,teak billet,teak billets

State Government

CTN :38402559

27 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of machineries & equipment for the electrician, fitter, lift & escalator mechanic, mechanic motor vehicle, machinist, operator advance machine tools, refrigeration air conditioning technician, solar technician, technician medical electronics, wireman, & welder trades.. - ac - air conditioner schedule, frost free refrigerator 200 l, three/four door refrigerator invertor (type), evacuating and refrigerant charging station, split a/c 1.5 ton with r32 refrigerant, duct able split a.c 3 ton with r410a or r-32 scroll compressor, cassette air conditioner 4500 kcal/hr, de scaling pump set, water cooler storage type, air conditioning, direct system complete with all controls including humidity control., air-conditioning, indirect system. (water cooled ), package a/c 5-ton capacity, bus a/c tutorial model, automatic ice cube m/c 50 kg/hour, vrf/vrv unit with two indoor units, split a/c (invertor technology), walk in cooler puf, air conditioner split type 2 tonne, au - automobile schedule, working model of air brake assembly, full floating axle and semi floating axle assembly, automative exhaust 5 gas analyser and diesel smoke meter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand., multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, cut section of 6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, transfer case with stand for dismantling and assembly., two post car lift capacity 4000 kg, tyre changer machine motorized pneumatic type,, ultrasonic injection cleaning equipment, wheel alignment machine computerized 3d, wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, el - electrical schedule, oil testing kit:, solar panel 18 watt with battery, d.c. shunt generator with control panel 2.5kw,220v, motor-generator 5 kw (ac to dc), d.c. compound generator with control panel, motor- generator (dc to ac), synchronous motor 3 phase, 3 hp, 440 volt, 50 hz,4 pole, with all panel board accessories, three phase transformer shell type, electrical machine trainer, diesel generator set, dc generators series, shunt & compound type, solar street light, solar traffic light, solar d.c pump, solar panels, solar street light lamp set, motor- generator 3 kw (ac to dc), es - solar schedule, weather monitoring station, solar cell based sunlight radiation meter, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells., solar tracker demonstrator kit, solar pv e-learning software using animations for trainee, solar pcu, solar grid tied inverter demonstrator kit, solar, wind, hybrid power plant, used water treatment solar plant demonstrator kit, demonstration kit for wind generation (wind turbine with blower), le - lift & escalator schedule, elevator control panel suitable for 5/8 passenger lift having separate input, output and cable alley chamber fitted with plc controller and related accessories., servo motor trainer 250w, 220/110v, working model of escalator, electromagnet brake assembly, door simulator set (car door, landing door and door drive unit), 5/8 passenger lift installed with all control and safety accessories, lm - light machineries schedule, drilling machine pillar 0-20 mm capacity with swivel table motorized with chuck and key, power hack saw machine 18 hydraulic, surface plate c.i 600 x 600mm with suitable stand and closed cover, slip gauge metric set 87 pieces in a box, work shop grade, drilling machine bench sensitive 13 mm capacity, slotter with base chuck, hm - heavy machineries schedule, pneumatic trainer k

CTN :38365533

19 Dec, 2024 NA

Tawang - Arunachal Pradesh

Tender For supply, installation, testing and commissioning of 58.5 kva cpcb iv compliant genset, efficient crdi including list of stores, tech specifications and store list attached , supply of constr mtrl for plinth and shed for tawang circle as per store list attached , e and m items for tawang circle mcb spn 240 volts 32 amps , mcb spn 6 to 32 amps , pvc tape 19 mm wide 5m long , on load change over switch within sheet steel enclosure 100 amps, 4 pole , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 sqmm single core , cable xlpe insualted screened pvc bedded, galvanised steel strip or wire armored electric power cable heavy duty 1100 volts grade , switch piano 5 amp 230 volts flush type one way snow white , switch socket combination snow white multipurpose 2 in 1, 15a, 230v , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , screw full thread 6 x 19 mm isi marked 200 screw per pkt , pvc switch board snow white of size 7 inch x 4 inch for socket and switches , ceiling rose three terminal snow white , pvc round oblique squire block , distribution box 4 way, double door spn 240 volts copper bus bar and neutral link earthing stud , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 6 sqmm 2 core , earthing items for tawang circle earthing plate 600x600x6mm galvanished steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1.5m long , galvanized iron strip 32 x 6 mm , charcoal , salt normal , supply of constr mtrl for earthing pit for tawang circle as per store list attached , supply of constr mtrl for plinth and shed for gorsam circle as per store list attached , e and m items for gorsam circle mcb spn 240 volts 32 amps , on load change over switch within sheet steel enclosure 100 amps, 4 pole, tpn , cable xlpe insualted screened pvc bedded, galvanished steel strip or wire armored electric power cable heavy duty 1100 volts grade , screw full thread 6 x 19 mm isi marked , earthing items for gorsam circle earthing plate 600x600x6mm galvanished steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia , ci earthing pit cover of size 300x300x6mm with angle iron , supply of constr mtrl for earthing pit for gorsam circle as per store list

Foldable Stretcher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government