Web Analytics Made Easy - StatCounter

Food Transportation Tenders

Get complete information related to latest Food Transportation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Food Transportation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Food Transportation Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :43037684 Due date: 23 Dec, 202523 Dec, 2025 NA
Tender For modification work in wheel set earthing equipment at carriage repair workshop harnaut.

Central Government / Public Sector

CTN :43038853 Due date: 15 Dec, 202515 Dec, 2025 NA
Tender For supply, installation, testing and commissioning of horizontal lifeline safety system for old lifting shop, new lifting shop, bogie shop, wheel shop & ac shop with accessories as per technical specification at annexure-a, scope of work at annexure-b & special condition of contract at annexure-c at carriage repair workshop, mancheswar.

Corporations And Associations And Others

CTN :43036093 Due date: 09 Dec, 202509 Dec, 2025 1.63 Lacs
Tender For a/mtc of l/s work in u.e kaithal for the year 2025-26.( hiring of brush cutter, carriage of malba etc in u.e. kaithal and all other work contingent thereto.)

Central Government And Public Sector

CTN :43037665 Due date: 06 Jan, 202606 Jan, 2026 NA
Tender For carriage of light melting scrap(lms) items consisting of wagon body(in dismantled/cut conditions), wagon cbc components without rubber(for example couplers and draft gears without pads), wagon bogies(in dismantled condition), wagon end buffers, yoke, knuckles, springs(including springs used in casnub bogies), ms angles, tie bars, ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru-560064; distance:0-500kms (with a minimum chargeable distance of 100kms), by road.special note: the consignor railway authorities shall ensure that cast iron and/or sulphur embedded items are not offered for loading.note: the work involves other intermediary and ancillary activities such as:(a)collection of lms (b)loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components or any other attachments(c)unloading at destination, by railways at free of cost.quantity: 5500 mt. special note: (1) tenderers should quote the rates based on the diesel price of rs.90.99 per litre prevailing at bengaluru as on estimation date i.e., 03.10.2025 and the same shall be considered for the purpose of evaluation. (2)mandatory documents should be submitted in compliance of: bid security conditions including annexure vi(a), annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. (3) non-submission of necessary documents in support of the above may result in rejection of bids.

Co-operative

CTN :43005067 Due date: 10 Dec, 202510 Dec, 2025 3.31 Lacs
Tender For supply of hardware item - 3000608, 59.400, size per roll 200 square feet4*50ft 200 square feet200/10.76 18.53 sqmeter 18.53*5 92.93 m2total- 5 rollmaterial- material ss 304 ss hardware,mosquito net,ss,16 x 26,deepak, 3035709, 59.400, plywood,commercial,is-330,8 x 4ft,19mm 59.46 m2 (20 sheet) our section demandhardwer material required for civil maintenance work for dsd mehsana,all cc,all cfp & psk jagudan., 3039349, 59.400, 12 mm thick commercial plywood total 20 nos sheet, 3039346, 59.400, adhesive,synthetic resin,1kg,fevicol tin-20s h fevicol-20 tin( 1kg pre tin)total 20kgs h fevicol, 3054854, 20.000, hardware latch,ms,12 x 250mm, 3207068, 100.000, chapras - 3 in, 3207066, 100.000, carriage bolt size 4 "use :- aldrop lagava mate carriage bolt, 3035502, 5.000, hardware,nail,with head,17gauge,1in,ms 5ea 5 kgwith head, 3035500, 5.000, 5ea 5 kg, 3035498, 5.000, 1 pac 1 kgtotal -5 kg, 3135344, 40.000, drawer slides 16" channel telescope for furniture total 40 nos pear

Central Government/Public Sector

CTN :42990566 Due date: 13 Dec, 202513 Dec, 2025 12.96 Lacs
Tender For offloading the work of cleaning of under carriage and greasing work in 11 nos. dozer (02 nos. cat d11t dozer and 09 nos. beml dozer) for period of 365 days and 05 nos komatsu d475 dozer for a period of 120 days of khadia project.

corporations/Associations/Others

CTN :42993804 Due date: 18 Dec, 202518 Dec, 2025 NA
Tender For work of carriage and replacement of damaged 630kva, 400kva, 250kva and 160kva transformers under edd-iind, mughalsarai.

corporations/Associations/Others

CTN :42993793 Due date: 18 Dec, 202518 Dec, 2025 NA
Tender For work of carriage and replacement of damaged 630kva, 400kva and 250kva transformers under edd-ist, chandauli.

State Government

CTN :42966383 Due date: 04 Dec, 202504 Dec, 2025 30.00 Lacs
Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

CTN :42719530 Due date: 09 Dec, 202509 Dec, 2025 NA
Tender For corrigendum : medium velocity water spray - supply of above ground pipes including transportation dn 6inch is 1239thk.heavy 5.4mm, supply of above ground pipes including transportation dn 4inchis 1239thk.heavy 5.4mm, fabrication erection installation painting and testing of above groundpipes dn6 inch is 1239 thk.heavy 5.4mm, fabrication erection installation painting and testing of above ground pipes dn4 inch is 1239 thk.heavy 5.4mm, remote operated valve rov as per details below design engineering supply erection fabrication testing and commissioning of remote operated valve rov assembly.pl refer atc document for details., remote operated valve rov as per details below design engineering supply erection fabrication testing and commissioning of remote operated valve rov assembly.pl refer atc document for details., gate valves as per details below complete work of supply installation testing and commissioning of valves. pl refer atc document for details., gate valves as per details below complete work of supply installation testing and commissioning of valves with spiral wound graphite .pl refer atc document for details., y t type strainer as per details below complete work of supply installation testing and commissioning of y t type strainer .pl refer atc document for details., y t type strainer as per details below complete work of supply installation testing and commissioning of y t type strainer pl refer atc document for details., spray nozzles supplying and installation of medium velocity fixed water spray nozzles along with matching reducing tee to connect with water spray ring.pl refer atc document for details., quartzoid bulb detectors supply installation testing and commissioning of quartzoid bulb detector.pl refer atc document for details., supply erection testing commissioning of medium velocity water spray system pl read atc docuemntr for complete details , supply erection testing commissioning of medium velocity water spray system pl read atc docuemntr for complete details , supply erection testing commissioning of medium velocity water spray system.pl refer atc document for details., supply of flanges complete work including supply and erection of flanges of respective sizes including all taxes duties transportation and inspection charges.pl refer atc document for details., supply of flanges complete work including supply and erection of flanges of respective sizes including all taxes duties transportation and inspection charges.pl refer atc document for details., supply of 1.5 d 90 degree bw elbow material as per pipe size 6 inch, supply of 1.5 d 90 degree bw elbow material as per pipe size 4 inch, supply of bw equal tees material as per pipe size 6 inch, supply of bw equal tees material as per pipe size 4 inch, excavation upto 1.50m earth work in excavation by mechanical means hydraulic excavator pl refer atc document for details., excavation beyond 1.50m excavation work by mechanical means hydraulic excavatoror manual means in foundation trenches or drains for depth beyond 1.5 m.pl refer atc document for details., carriage or disposal carriageordisposal of materials by mechanical transport loading unloading and staking excavated all type of ordinary rock soil and dismantled concrete material any lead within plant premises area, back filling backfilling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 3 m., demolishing rrc demolishing r.c.c. work floor pavement or foundations or pedestal or slab etc.pl refer atc document for details., demolishing stone or brick masonary demolishing stone rubble masonry or brick masonry or plain cement concrete work manuallyor by mechanical means. pl refer atc document for details., pcc 148 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to
 Loading, Please wait...

Connect us via What's Up