Latest framing arrangement Tenders | Government framing arrangement Tenders

CTN :40468478

05 Jun, 2025 17.50 Lacs

Salem - Tamil Nadu

Tender For purchase of mini lorry for public health use in p.n.patty town panchayat - a hopper tipper dumper is a truck designed for carryingmaterial, which may be garbage, construction material,mining minerals and any other loose material. the truck isfi tted with specially designed hydraulic tipping mechanismdriven by pto or power pack, which enables the dumper(rear portion expect the driver cage) to move up and downfor unloading of the material. it is the safest way to quicklytransport loose materials from one site to another., generic parametersvehicle category, generic parametersvehicle category, vehicle engine cubic capacity (cc), type of fuel, vehicle emission compliance, number of cylinder in engine (nos), vehicle mileage (declared by oem as certified by test agencyunder rule 115 of cmvr 1989) (kmpl), gradeability of vehicle (degree in first gear), maximum engine power range (in kw), max engine power (kw@rpm), max engine torque (nm@rpm), fuel tank capacity (liter), category of vehicle for which chassis to be used, overall length of vehicle (mm), overall width of vehicle (mm), overall height of vehicle (mm), ground clearance (mm), minimum wheel base (mm), type of tyre and tube (for both front and rear), front vehicle brake, rear vehicle brake, vehicle transmission system, type of steering, turning radius (mm), nos of forward gears, vehicle air intake system, type of clutch, axle configuration, front axle suspension system, rear axle suspension system, air conditioning, standard spare wheel and tool kit, warranty period, battery warranty (month), number of free service (nos), fabrication description, type of tipper, define type of tipper, tipping angle (degree), hopper tipper dumper container capacity/volume (cubicmetres), tipper body pivot length (mm), tipper body length (mm), tipper body height (mm), overall height of tipper from ground (mm), dumping height (mm), body plate thickness (mm), tipper sub frame thickness (mm), hydraulic system, tipping hydraulic cylinders(make), hydraulic system driven by, tipper container material, engine oil pressure level indicator in control panel, fuel gauge indicator in control panel, engine cooling liquid temperature indicator in control panel, operating hour meter, locking/unlocking of tipper discharge container, lowering/lifting of tipper discharge container, counter weight, insurance charges, temporary registration charges & permanent registration charges

Central Government/Public Sector

CTN :40485632

28 Jul, 2025 NA

Harnaut - Bihar

Tender For supply of suspension strap on bogie frame, icf's drg. no. wtac3-0-3-317,item no.-1 (one) ,alt. no . b [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40311668

30 May, 2025 21.16 Lacs

Shaktinagar - Karnataka

Tender For corrigendum : repairing/co-axial line boring/machining work of a frame bearing housing, steering cylinder and steering tie rod mounting eye, rear suspension mounting eye, hoist jack mounting eye of 10 nos cat 777d/e 100t dumpers at nws for a period of 01 years.

Central Government/Public Sector

CTN :40473173

23 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of bogie frame arrangement for emu motor coach including bogie brake piping arrangement as mentioned below:- 1) bogie frame arrangement for emu motor coach as per icf drg. no. dmu/dpc-0-3-009 , col- 1, alt.-h (small h) or latest & to spec no. rdso spec- c-9202 (rev 2) & icf /md/spec-147 rev,-02, a mendment slip no. 01 dt. 12/02/2007 (corresponding to item sl . no. -18 of icfs drg no.- acemu/m/asr-0- 0-001, alt- p/2, col-6 of bogie general arrangement for emu/motor coach with air spring suspension) 2) b ogie brake piping arrangement for motor coach bogies as per icf drg. no. dmu/dpc7-3-2-701 alt. e (small e) or latest col-ii - 1 no/set ]

CTN :40462151

09 Jun, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of bogie frame assembly for hand brake side power car /slr bogie with air spring in secondary suspension as per rcf drg no. lw03003 alt e, spec mdts 213 rev-04 [ warranty period: 30 months afte r the date of delivery ]

Central Government / Public Sector

CTN :40434090

03 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of suspension strap on bogie frame to icf drg no : wtac-0-3-317 alt : b / nil. mtrl spec is:2062-92-fe 410 wc. [ warr anty period: 30 months after the date of delivery ]

CTN :40435272

01 Jul, 2025 NA

Kharagpur - West Bengal

Tender For supply of suspension strap on bogie side frame. drawing no. icf's drg. no. t-0-3-634, alt. g/15. m aterial and specification : as per drawing. [ warranty period: 30 months after the date of delivery ]

CTN :40115469

03 Jun, 2025 3.06 Crore

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares for esp - collecting system, drg. no. gid-118-4f267-1, shock pad/head, en8, u-clamp for collecting electrode, is2062, bush for shock bar concave, en8, bush for shock bar convex, en8, sleeve/bush, is2062, lower horizontal plate, is2062, collecting rapping, drg. no. gid-118-4f267-2, bushing/ sleeve (to connect the shafts), is2062, shaft coupling (1), is2062, shaft coupling (2), is2062, rapping hammer assembly, is2062, en8, adjusting ring, is2062, internal bearing (two roller), en8, internal bearing (four roller), en8, emitting system, drg. no. gid-118-4f267-3, barbed wire, is2062, spinule (barbed electrode type-2), is2062, spiral wire, ss3161, support insulator heater 1.5 kw, ceramic, support insulator heater 1 kw, ss304, emitting rapping, drg. no. gid-118-4f267-4, antidust cover, is2062, en8, bearing for vertical shaft (three roller), en8, bush for vertical rapping shaft (three roller bearing), en8, minor pin wheel, is2062,en8,en19, major pin wheel, is2062,en8,en19, internal bearing (four roller), en8, internal bearing (two roller), en8, bush for emitting horizontal shaft (for bearing), en8, shaft end, en8, support tray, is2062, en8, rapping hammer assembly, is2062, en8, adjusting ring, is2062, shaft insulator heater, ceramic, shaft casing (vertical bearing cover plate), is2062, en8, bearing 111211, chrome steel, sealing bush (vertical bearing base plate), en8, drive shaft (top of shaft insulator), en8, inlet gas distribution plate, drg. no. gid-118-4f267-6, perforated plate (4), is2062, hopper, drg. no. - gid-4f267-9, hopper heater, ss304, emmiting other spares, collecting electrode, 513 gd crca, top hanger for ce suspension frame forexisting ce with 18 hooks 75x75x8 mm, is2062, sleeve tube/ bush 16x50 mm, f210, nut & bolts m16xms110 mm l, ht, nut & bolt m30 ms 105 mm l, ht, washer m16, ht, washer m30, ht, nut & bolt m10 ms 20 mm l, ht, ce frame top size 65x65x6 support angle, is2062, beam for ce suspension frame top 150x10000mm, is2062, shock bar guide supporting channel 150x10000mm, is2062, shock bar guide supporting channel 100x10000mm, is2062, angle 65x10000 mm, is2062, gas guide plate hopper 650x2000x3.15 mm, is2062, ee frame top size 60x40x3 box channel with lower side connector l-5540, is2062

corporations/Associations/Others

CTN :40408876

29 May, 2025 5.00 Lacs

Kanchipuram - Tamil Nadu

Tender For providing of play materials to muthukumaran nagar park ward no2 in poonamallee municipality - supplying and fixing of double swing of height 2.40m height with 40mm dia m.s. pipes support as legs and top bar is 50mm dia. the seat is 9mm thick reinforced rubber with antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of four seater seesaw to a height of 0.50m with 80mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic with heavy duty bush bearing. the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of two seater seesaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic with heavy duty bush bearing. the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic. the ladder frame is made up of 25mm m.s.pipe, hanrail 20mm dia m.s. pipe and the centre support is 80mm dia m.s. pipe the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of jungle gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with m.s. pipes. the ladder frame is made up of 25mm m.s.pipe, hanrail 20mm dia m.s. pipe and the centre support is 80mm dia m.s. pipe the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and erection of the following outdoor gym materials in public parks for public as per the standard specifications. standing twister, pullup bar, chest press, tai chi spinner

CTN :40373259

26 May, 2025 3.23 Lacs

Ranchi - Jharkhand

Tender For dumper 90031 repair of dump body, canopy, a-frame housing, bush making and fitting, front suspension support (lhs) of dumper of kdh project.

Framing Arrangement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others