Latest frosted glass Tenders | Government frosted glass Tenders

Central Government / Public Sector

CTN :40120400

06 Jun, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : cmi spares - list of item(s) / work(s) as per tender documents, lip seal for dial indicator, top seal f/upper bearing housing, upper bearing,p/n:2227, bottom seal f/uppr brg husg, sets o ring f/lower shaft, o ring for main head flnge, knuckle pin item no-7, pawl pin item no-8, pawl bushing item no-10, pawl item no-11, spacer-cylinder pin item no-12, cylinder clevis pin item no-14, washers,cylinder pin,set, p/n-3530b, lube hoses no.5,7,8, p/n-9910a-18.75,uop, lip seal set, main bearing,p/n-2536-2537, secondary seal sleeve,p/n:0189c, o ring f/husg top head joint, sets o ring f/secondary seal, hydraulic pump dischrge filtr element, flange gasket, sight glass assy,p/n-2410, o ring for sight glass, p/n-2740, packs of lubricate grease, pawal springs,p/n-61,rv-iii,uop

State Government

CTN :40519319

05 Jun, 2025 90.00 Lacs

Bikaner - Rajasthan

Tender For supply material for mgnrega work- mitti, chuna, cement, p.p.c, fine aggregate, sand, fly ash, stone chips, stone grit, binding materials, bricks, sand stone, almirah, tand, dpc, sill coping, ruff kota stone, marble stone, fr pvc insulated copper conductor, wooden fittings, doors, structural steel, iron, winding wire, iron guarder, grills, cement concrete grills, glass, paint, enamel paint, primer, diesel, movil oil, bitumen board, sheet, gi sheet, ms sheet, indian w.c, orrisa w.c, europeam w.c, wash basin, pvc waste pipe, cp bib cock, cp pillar cock, steel conduit, pvc water tank, steel fasteners, module gi box, junction box, cover plate, modular switch, modular socket, pin, mcb db, gi pipe, brass wire, ci and ms cover plate.pipe, roller, truck, pumping set, dumper, cultivator

State Government

CTN :40519784

02 Jun, 2025 NA

Jaipur - Rajasthan

Tender For providing & fixing glass film & finishing work in simulation lab.

Central Government/Public Sector

CTN :40533799

09 Jun, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For off-loading work for replacement of broken safety glass in several different model drills of dudhichua project for 2 years duration

CTN :39946290

03 Jun, 2025 NA

Porbandar - Gujarat

Tender For bid to ras supply of executive table , work station , over head cabinet , centre table swagat , corner table swagat , sofa cum bed , sofa , chair , new glass door , wall acoustic panelling , wooden panelling for cemented shelf , wooden cabinet , frosted fluted film with nae crest print , wooden sideboard for meal swagat , drafting table

CTN :40540517

20 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of customised office table 18ftx30inchx30inch with 18ftx30inchx30inch under table storage , anti static medium back chairs , customised working bench of 16ftx24inchx30inch inches , customised storage cabinet made of 18mm plywood and 1mm laminate 48inchx24inchx18inch , customised office table with 26ft or 20ftx24inchx30inch with 26ft or 20ftx24inchx24inch under table storage made of 18mm plywood and 1mm laminatemade of 18mm plywood and 1mm laminate , customised metallic working bench 48inchx24inchx24inch with 24inchx24inchx18inch vice runner , ss alloy storage cabinet 72inchx36inchx24inch customized with safety locker , customised metallic working bench 48inchx24inchx24inch with 24inchx24inchx18inch vice runner heavy duty with wheels lockable , work bench with vice with wheels for portability , customized executive desk 72inchx36inchx30inch with wiring cabinet and 24inchx24inchx20inch under table cabinet and side runner 48inchx24inchx24inch , sofa 3 seater three seater cushion seater with leatherette finish , sofa 1 seater single seater cushion seater with leatherette finish , portable podium with inbuilt pa system , side centre table 24inchx18inchx18inch with melamine finish , customized center table with melamine finish and glass top 36inchx18inchx24inch , customised book shelf with 18mm plywood and 1mm laminette , magazine stand , rustrum wooden podium 48inchx24inchx24inch with internal storage and display top with glass cover , working table for operator 36inchx24inchx18inch , customized center table with melamine finish and glass top 30inchx24inchx18inch , key chest , customised filing cabinet 30inchx24inchx18inch made of 18mm plywood and 1mm laminate , customized three seater sofa with leatherette finish , corner table 24inchx24inchx18inch , corner table with glass top 12inchx18inchx18inch , 03 layer magazine shelf for magazine and newspaper , 72inchx24inchx12mm mirror with dept crest at bottom and optic light and laminate border , customized workstation of 30inchx24inchx24inch made of 18mm plywood and 1mm laminate and storage 18inchx18inchx30inch , operator chair with low back and no wheels , jacket and umbrella stand with 06 hangers each , storage cabinet 72inchx48inchx18inch mode of 18mm plywood and 1mm laminate with locking facility , reception table 24inchx30inchx30inch with under table storage made of 18mm plywood and 1mm laminate and dept crest in front with lockable storage , display board 48inchx36inch with pin up board separations , sofa 2 seater two seater cushion seater with leatherette finish , all weather round table 48inch with fibre top and pvc coating , all weather chairs with pvc coating , storage cabinet 36inchx24inchx30inch made up of 18mm plywood and 1mm laminate with modular drawers and sliding setup , stools customized portable seaters , cctv monitoring station 48inchx36inchx30inch made of 18mm plywood and 1mm laminate with under table storage 48inchx18inchx24inch , mobile locker 48 set , customised ss alloy storage cabinet 72inchx12inchx18inch with seperators for shoes and cloth hanging with mini locker , 16 helmet rack with mirror , heavy duty equipment rack 25ftx10ft with four floor metal shelves and movable base bid details/ 2 / 35

CTN :40534248

18 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn

CTN :40539533

05 Jun, 2025 77.40 Lacs

Patiala - Punjab

Tender For renovation of dlsa, phc, new delhi ground floor with wall panelling glass partition, false ceiling and wooden cupboard work at patiala house court complex, new delhi. sh: - civil and electrical work.

CTN :40420735

09 Jun, 2025 26.59 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : brick relaying work with 40 percent new 1st class brick from chainage (0.010 to 0.200) km new brick linning with 100 percent new 1st class brick from 0.200 km to 0.600 km cc on bed with glass strip from 0.00 km to 0.600 km cement plaster from 0.00 to

CTN :40547367

09 Jun, 2025 1.49 Crore

Hanumangarh - Rajasthan

Tender For stainless steel railling, glass work, door fittings, sewerage pvc pipe and vrv electrical work in auditorium hanumangarh junction

Frosted Glass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector