Latest frp board Tenders | Government frp board Tenders

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

State Government

CTN :45693428

30 Jun, 2026 NA

Birbhum - West Bengal

Tender For 24_lmr/vgramg/fixation of local market rate of material items for implementation of mgnrega schemes under bolpur sriniketan development block, birbhum. - hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x

State Government

CTN :45681201

27 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev block and 10 nos of gp under khoyrasole dev. block for the year 2026 - 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

State Government

CTN :45689677

10 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply and installation custom furniture - antiseptic oral pain reliving topical gel containing antiseptic and topical anesthetic , abrasive mounted diamond fg round 1.8mm , abrasive mounted diamond fg inverted cone 1.6mm , abrasive mounted diamond fg cylindrical cone 1.2mm , bur tungsten carbide for straight hand piece 7mm , bur round cross cut tungsten carbide for straight handpiece size 1.6 mm , cloth glass polishing bleached cotton white 1x half , ultrasonic cleaning solution with corrosion protection, pkt of 20 to 25 pouches containing 15 ml each , glass dappens medicament assorted colours , bite registration paste silicone based set of two cartidges of 48 to 50 ml each , gingival retraction cord roll of 100 to 120 inches , disposable rvg sensor sleeves pkt of 1000 , fibre reinforced composite stripe for splinting light cure 22 cm in length in assorted sizes of 2,3 , plaster dental stone pkt of 3 kg , articulating paper , apf gel bott of 500 ml , slab glass mixing size 15.2 cm x 7.6 cm x 2.2 cm , patient bib plastic , tips saliva ejector disposable pack of 100 , wax modeling base plate wax , pit and fissure sealant syringe of 1 to 3ml , abrasive, white acrylic fig 4 for straight hand piece , base, acrylic resin powder pink shade bott of 450gm and acrylic resin liquid bott of 227.3 ml , base, acrylic resin powder clear shade bott of 450gm and acrylic resin liquid bott of 227.3 ml , calcium hydroxide coated gp points , wire ss round hard 19 gauge, coil of 500gm , wire ss round hard 20 gauge, coil of 500gm , wire ss round hard 21 gauge, coil of 500gm , brush lathe 7.6 cm rows stiff converging with wooden hub , brush lathe 6.6 cm soft with 4 straight rows with wooden hub , suction cleaning solution bott of 1 ltr , mta based root canal sealer pack of 2 to 3 gm , cones polishing rubber black set of 03 , cold mould seal 500 ml , plaster of paris special dental grade 1 , teeth anterior acrylic cross linked lower set of 6 , teeth anterior acrylic cross linked upper set of 6 , teeth posterior cross linked, acrylic set of 16 upper and lower , wheel whool polishing , wheel lathe round edge medium grit 38 x 4.7 mm , wheel lathe round edge coarse grit 38 x 3.2 mm , self cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml , self cure acrylic powder clear shade bott of 110gm with self-cure acrylic liquid 110ml , teeth acrylic cross linked set of 28 complete comprising one set each of upper and lower anterior and posterior teeth , spray anesthetic surface bott of 100 ml , brush bristle mounted small cup-shaped for right angle handpiece, box of 12 , prophylaxis paste jar of 300 to 500 gm , polishing cup rubber, mounted soft for rahp pkt of 12 , bone graft and collagen gel 1 cc , cement polycarboxylate kit, consisting of powder of 60 to 80 gm and liquid with spoon and mixing pad , crown and bridge plaster diestone super hard for pkt of 1000 gm , material impression alginate pkt in 300 to 500mg , paste impression pkt of two tubes containing zno base 125 to 165 gm and catalyst , stick tracing red or green soft pkt of 10 , rubber base impression material kit with accessories , bis acrylic resin based provisional kit for temporary crown work , bur, round tungsten carbide for fg 1.0 mm, pkt of 3 , bur fissure flat cross cut tungsten carbide for fg 1.2 mm , bur tapering tungsten carbide for fg 1.6 mm , bur inverted cone tungsten carbide for fg 1.4 mm , cement, zoe reinforced temporary powder and liquid , disc polishing for composite, snap- on consisting of medium, coarse and fine grit pkt of 50 to 75 disc , fine and medium abrasive diamond or aluminum oxide coated strips pkt of 10 , medicament root canal formocresol bott of 10 to15 ml , material temporary filling, no mix single phase bott of 25 to 30 gm , matrix retainer ss lvory pattern band for, pkt of 12 for molars and premolars , outfit matrix ss siqveland bands narrow , points absorbent root canal assorted box of 6 tubes containing assorted sizes , universal self etch

CTN :45690020

08 Jul, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of antiseptic oral pain reliving topical gel containing antiseptic and topical anesthetic , abrasive mounted diamond fg round 1.8mm , abrasive mounted diamond fg inverted cone 1.6mm , abrasive mounted diamond fg cylindrical cone 1.2mm , bur tungsten carbide for straight hand piece 7mm , bur round cross cut tungsten carbide for straight handpiece size 1.6 mm , cloth glass polishing bleached cotton white 1x half , ultrasonic cleaning solution with corrosion protection, pkt of 20 to 25 pouches containing 15 ml each , glass dappens medicament assorted colours , bite registration paste silicone based set of two cartidges of 48 to 50 ml each , gingival retraction cord roll of 100 to 120 inches , disposable rvg sensor sleeves pkt of 1000 , fibre reinforced composite stripe for splinting light cure 22 cm in length in assorted sizes of 2,3 , plaster dental stone pkt of 3 kg , articulating paper , apf gel bott of 500 ml , slab glass mixing size 15.2 cm x 7.6 cm x 2.2 cm , patient bib plastic , tips saliva ejector disposable pack of 100 , wax modeling base plate wax , pit and fissure sealant syringe of 1 to 3ml , abrasive, white acrylic fig 4 for straight hand piece , base, acrylic resin powder pink shade bott of 450gm and acrylic resin liquid bott of 227.3 ml , base, acrylic resin powder clear shade bott of 450gm and acrylic resin liquid bott of 227.3 ml , calcium hydroxide coated gp points , wire ss round hard 19 gauge, coil of 500gm , wire ss round hard 20 gauge, coil of 500gm , wire ss round hard 21 gauge, coil of 500gm , brush lathe 7.6 cm rows stiff converging with wooden hub , brush lathe 6.6 cm soft with 4 straight rows with wooden hub , suction cleaning solution bott of 1 ltr , mta based root canal sealer pack of 2 to 3 gm , cones polishing rubber black set of 03 , cold mould seal 500 ml , plaster of paris special dental grade 1 , teeth anterior acrylic cross linked lower set of 6 , teeth anterior acrylic cross linked upper set of 6 , teeth posterior cross linked, acrylic set of 16 upper and lower , wheel whool polishing , wheel lathe round edge medium grit 38 x 4.7 mm , wheel lathe round edge coarse grit 38 x 3.2 mm , self cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml , self cure acrylic powder clear shade bott of 110gm with self-cure acrylic liquid 110ml , teeth acrylic cross linked set of 28 complete comprising one set each of upper and lower anterior and posterior teeth , spray anesthetic surface bott of 100 ml , brush bristle mounted small cup-shaped for right angle handpiece, box of 12 , prophylaxis paste jar of 300 to 500 gm , polishing cup rubber, mounted soft for rahp pkt of 12 , bone graft and collagen gel 1 cc , cement polycarboxylate kit, consisting of powder of 60 to 80 gm and liquid with spoon and mixing pad , crown and bridge plaster diestone super hard for pkt of 1000 gm , material impression alginate pkt in 300 to 500mg , paste impression pkt of two tubes containing zno base 125 to 165 gm and catalyst , stick tracing red or green soft pkt of 10 , rubber base impression material kit with accessories , bis acrylic resin based provisional kit for temporary crown work , bur, round tungsten carbide for fg 1.0 mm, pkt of 3 , bur fissure flat cross cut tungsten carbide for fg 1.2 mm , bur tapering tungsten carbide for fg 1.6 mm , bur inverted cone tungsten carbide for fg 1.4 mm , cement, zoe reinforced temporary powder and liquid , disc polishing for composite, snap- on consisting of medium, coarse and fine grit pkt of 50 to 75 disc , fine and medium abrasive diamond or aluminum oxide coated strips pkt of 10 , medicament root canal formocresol bott of 10 to15 ml , material temporary filling, no mix single phase bott of 25 to 30 gm , matrix retainer ss lvory pattern band for, pkt of 12 for molars and premolars , outfit matrix ss siqveland bands narrow , points absorbent root canal assorted box of 6 tubes containing assorted sizes , universal self etching cum bonding system sixth gene

CTN :45686379

15 Jul, 2026 NA

Shimla - Himachal Pradesh

Tender For finalization of rate contract of dental equipment and dental material - dental material, hybrid light-cure kit pack of 5x4 g syringe with 7th gen. bond kit, paper point 15-40 pack of 200 pieces, gutta-percha points gp point 15-40 pack of 120 pieces, suction tips pack of 100 pieces, temporary filling material pack of 40 g, root canal sealer tube of 13 g, edta paste 3g syringe pack, etching gel tube 3ml syringe pack, endo rotory file 21mm pack of 6 file, endo rotory file 25mm pack of 6 file, gp point 4% all size pack of 120 points, gp point 6% all size pack of 120 points, paper point 4% all sizes pack of 120 points, paper point6% all sizes pack of 120 points, formocresol bottle 15 ml, gutta-percha (gp) solvent bottle 15ml, articulating paper packet of 24 slips, polishing paste pack of 45g, polishing cups 1 piece, mta biocermic sealer pack of 2 gm syringe, sodium hypo 3% bottle of 500ml, hand protaper file set of 6 21 mm s1, hand protaper file set of 6 21 mm s2, hand protaper file set of 6 21 mm sx, hand protaper file set of 6 21 mm f1, hand protaper file set of 6 21 mm f2, hand protaper file set of 6 21 mm f3, flow able composite 2gm syringe, glass ionomer cement type ii p-15g, l-8 ml with mixing pad spatula, zirconomer reinforced gic p-12g, l-5 ml with mixing pad spatula, light cure syrings all shade rate of one syringe 1x4 gm composite syringes, light cure bond 7 gen 1x5 ml bond with applicator tips, high level instrument disinfection (liquid) pack of 5 ltr, antiseptic solution pack size 100 ml, sterilizing & disinfection solution pack of 5 ltr, handpiece oil bottle of 550 ml oil spray, clinical instrument trolly 6 drawers and 4 inserts with stainless steel (ss) top, cotton roll pack of 500gm, examination gloves box of 100 pieces, rvg sleeves pack of 500 pieces, face mask 3 ply/3-layer pack pack of 50 pieces, betadine 5 % bottle of 500ml, bioceramic root canal sealer pack of 3 g syringe, rubber base material putty with light body putty base 900 ml with light body 140ml, denture relining material for denture repair soft liner 50g powder +25ml x 2 liquid + dropper +measuring cup one pack, cotton buff for denture polishing size 4 inches, lathe wheel for denture trimming 3 inch wheel, sand paper mandrel for denture trimming, acrylic stone for denture trimming & finishing acrylic white/ black/ green, carbide trimmer for denture trimming carbide carbide trimmer size conical / round / small /medium size, polishing cake for denture polishing for denture polishing polishing cake pack of 100 g cake, denture cleaning kit for denture cleaning denture cleaning paste pack of 80g instant denture cleaning paste, calcium hydroxide paste usfda/ european ce approved catalyst 11 gm base 13 gm, glass ionomer luting cement usfda/ european ce approved powder 35 gm liquid 25 ml type 1, zinc phosphate cement pack powder 35 gm powder zno, mno, powder, liquid 15 ml phosphoric acid, silver reinforced glass ionomer cement usfda/ europan ce approved p 35 gm, l- 10 ml, head cap dispo pack of 100 pieces, dental equipment, led light cure unit led light cure unit cordless one unit, endomotor led cordless endomotor with led one unit, apexlocater 5th gen 5th gen apex locater one unit, root elevator rust free stainless steel (ss) kit set of 10 pieces (root elevator hockey stick (right & lift) 02 straight elevator 2mm 01, 3mm 01, 4.5mm 01 warwick james elevator straight 01 apexo elevator (right & lift) 02 cryer elevator (right & lift) 02, filling instrument teflon coated rust free stainless steel (ss) kit set of 6 pieces, model trimmer 10 inches diameter, indian diamond wheel, heavybaseinletoutflow water system heavy duty equipped with 2 wall bearings motor., hydraulic bench press hydraulic press for flask one unit, dental x- ray portable for rvg portable precision imaging for modern professionals x-rayrvg aerb approved, rvg ergonomically optimized cut corners, bringing high patient occlusal comfort pixel matrix 1200*1650 active area 24*33 size

CTN :45682553

20 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of dark welding glass green shade/filter/din:13as per is:5983/1980 reaffirmed 2018. size 105 x 80 x 4mm. ( tolrence +4,-0mm. on length & width and thikness +0,-1) as per is:1179/1967 reaffirmed 2019 clause 7.2.3.1. [ warranty period: 30 months after the date of delivery ] ]

CTN :45332808

26 Jun, 2026 5.09 Lacs

Srinagar - Jammu And Kashmir

Tender For bid to ras bid to ras supply of antiseptic mouth wash containing sodium fluoride and triclosan botl of 100ml - antiseptic mouth wash containing sodium fluoride and triclosan botl of 100ml , anticaries fluoride rinse mouth wash with sodium fluoride acidulated phosphate of 300 ml , gel for root canal preparation containing water soluble lubricant 17 percent edta tube of 3.05 gm , desensitizing paste stannous fluoride pottasium nitrate sodium monofluro phosphate , periodontal pack non eugenol two paste system of base and catalyst 90 gms each , plaster dental stone pkt of 1 kg , articulating paper , patient bib plastic , calcium hydroxide with iodoform root canal dressing and filling paste in syringe of 24 gms , plaster of paris special dental grade 1 , lining cavity composite cal hyd based photo cure prefilled syringe of 25 gm with applicator tips , material temporary filling no mix single phase bott of 25 to 30gm , material plastic glass ionomer photo cure for lining and luting powder 10 to 15 gm and liq , root canal sealer paste for obturation containing two tubes , medicament root canal formocresol bott of 10 to 15 ml , sol sodhypochlorite 2 percent for endodontic irrigation bott of 500ml , flowable lightcure composite kit complete of four syringes of 24 gm each with etchant and bonding , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 500ml ffs , crown and bridge plaster die stone super hard for pkt of 1 kg , endodontic access bur set of 06 , paraffin soft yellow jar of 4 kg , stainless steel endo dontic k files no 8 length 21mm , stainless steel endo dontic k files no 10 length 21mm , stainless steel endo dontic k files no 15 to 40 length 21mm , stainless steel endo dontic h files no 15 to 40 length 21mm , gates glidden drill sizes 1 to 6 length 28mm , mta based root canal sealer pack of 23 gm , teeth acrylic cross linked set of 28 complete comprising one set each of upper and lower anterior teeth and one set each of upper and lower posterior teeth a2 and a3 shade , teeth posterior cross linked acrylic set of 16 upper and lower , teeth anterior acrylic cross linked upper set of 6 a2 and a3 shade , crown and bridge investment graphite free for np alloy powder 4 kg and liquid of 1l , crown and bridge metal np alloy for box of 1 kg , wax modelling baseplate wax box of 226.85 gm , self cure acrylic powder clear shade bottle of 110 gm with rapid repair liquid 110ml , bracket roth 0.018 swa with first and second molar tubes in set , gp solvent liquid , single rotary glide path file 21 mm , post extraction resorbable fiber based alveolar dressing jar of 10 to 12 gms , cement zoe reinforced temporary and liquid , lentulo spiral size 21 mm and 25 mm , modelling liquid vita , opaque liquid vita of 250 ml , ceramic finishing kit , biostar sheet 1 mm , disc mandrels for dental laboratory , gutta percha f1 , gutta percha f2 , fixed taper gutta percha 25 4 percent with 120 points , fixed taper gutta percha 20 6 percent with 120 points , fixed taper gutta percha 25 6 percent with 120 pts , ketac molar , calcium hydroxide powder , stainless steel endodontic k files no 6 length 21mm , stainless steel endodontic k files no 15 length 21mm , stainless steel endodontic k files no 08 length 25 mm , stainless steel endodontic k files no 10 length 25 mm , stainless steel endodontic k files no 15 length 25 mm , stainless steel endodontic k files no 15 to 40 length 31 mm , stainless steel endodontic k files no 45 to 80 length 31 mm , orthodontic normal tooth brush , liquid edta 17 percent , dycal calcium hydroxide liner , abgel absorbable gelatin sponge , prolene suture size 4 0 70 to 76 cm reverse cutting 3 by 8 circle needle 13 to 25 mm pkt of 12 , prolene suture size 5 0 70 to 76 cm reverse cutting 3 by 8 circle needle 12 to 18 mm pkt of 12 , monocryl suture size 3 0 70 to 76 cm reverse cutting 3 by 8 circle needle 20 to 25 mm pkt of 12 , vicryl suture size 5 0 45 cm length rb 3 by 8 circle 20 to 30 mm needle size pkt of

State Government

CTN :45675988

02 Jul, 2026 34.13 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to c & d type, varada block & arkaavathi block, koramangala, bengaluru from august-2026 to july-2027- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes , item description: providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing unpl

Frp Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

State Government

State Government

State Government