Latest frp pipes Tenders | Government frp pipes Tenders

State Government

CTN :40999751

14 Jul, 2025 1.99 Lacs

Baramati - Maharashtra

Tender For construction of chamber and providing and supplying various types of material submercible pump for gp nimbodi tal- baramati dist- pune - item no.1 :- providing and fixing as per relevant is specifications ci d/f sluice valves, suitable types of pressure relief valves etc. of following doa. excluding gst levied by goi & gom in all respect, including transportation upto site of work, unloading, stacking etc with lowering laying & jointing pipes. complete.65 mm dia. sluice valve -pn-1.0, 80 mm dia. sluice valve -pn-1.0, item no.2 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc.complete.(100mmx225mm )20kg, item no.3 :- providing, erecting, commissioning and testing of submersible motor pump sets capable of discharging 60 lpm against total head 120 m. from all causes when running at 2900 rpm directly coupled with wet type sub mersible motor squirrel cage induction type of adequate capacity as per detailed specification enclosed, item no.4 :- providing,supplying and fixing in position skeleton type box panel board suitable for 5.0 hp single pump including all taxes, labor transportation up to site etc complete as per direction enginner in charge, item no 5:- providing, supplying and fixing in position hdpe pipes of 90 mm dia including all taxes labour transportation upto site etc complete as per direction engineer in charge, item no 6:- providing,supplying and fixing in position 3 core 1 10 sq mm summerssible copper cable suitable for 7.5 hp motar pump set including all taxes labor transportation upto site etc complete as per direction of enginner in charge, item no 7:-providing & supplying and fixing in position c.i./g.i./m.s. specials suitable for all pipes and pumping machinary including all taxes labour transportation up to site etc complete as per direction of enginner in charge, add for gst 18%

CTN :40793549

25 Jul, 2025 1.72 Crore

Kanchipuram - Tamil Nadu

Tender For corrigendum : supply of 8mp ir bullet camera vf , 5mp ir bullet camera , 4mp ir domecamera , pan tilt zoom camera , camera housing with arm , bird spike for camera housing , anpr and bullet camera pole , 100 mtr ir illuminator with stand , 16 channel nvr , 32 channel nvr , 64 channel nvr , 8 tb surveillance hard disk , 10 tb surveillance hard disk , 16 tb surveillance hard disk , monitor 21 point 5 inch , monitor 32 inch , monitor 43 inch , monitor 55 inch , wall mounting stand for monitor push back , workstation , 08 port poe switch with 2 sf port , media converter , sf module , 06 12 port liu fully loaded , lc to lc or lc to sc patch cord , 6u rack with accessories , 6u outdoor rack with accessories , earth rod with accessories , cat 6 cable , 3 core 1 point 5 sq mm power cable , 3 core 2 point 5 sq mm armoured cable , 2 kva ups , 5 kva ups , ofc 06f armoured cable single mode , splicing charges , splicing cylinder with accessories , 40 mm hdpe pipe , 1 inch pvc pipe , pvc gang box with attachment , electrical accessories , db box with mcb and rccb , wireless mouse , 5 mtr hdmi cable , hdmi extender , usb extender , 5 mtr dvi cable , laying of cables and pipes , digging and filling , route marker , anpr license and other software , installation testing and commissioning , on site engineer charges 8 hour per day for first year , on site engineer charges 8 hour per day for second year

CTN :40821460

17 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

Central Government / Public Sector

CTN :41001129

22 Jul, 2025 NA

Multi City - Multi State

Tender For supply of dwc ( double wall corrugated) hdpe pipe as per is-16205 part - ii dwc pipes, size: 74 mm outer dia and 60mm inner dia, length : 6 meter each pipe, make: dutron or jindal or gemini pipes or its equivalent [ warranty period: 12 months after the date of delivery ]

Central Government / Public Sector

CTN :41001225

31 Jul, 2025 NA

Nanded - Maharashtra

Tender For supply of dwc (double wall corrugated) pipe as per rdso specification rdso/spn/204/2011. d wc pipes, size:74mm outer dia and 60mm inner dia, length: 6 meter each pipe. dwc hdpe pipe, m ake: dutron or jindal or gemini pipes or similar [ warranty period: 30 months after the date of deliver y ]

CTN :40949790

11 Jul, 2025 2.43 Lacs

Delhi - Delhi

Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

corporations/Associations/Others

CTN :40848245

14 Jul, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for

CTN :40645157

07 Jul, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or jk or dalmia or acc , coarse sand free from vegetation , coarse aggregate 40mm graded , stone boulder 9 to 12 , pvc pipes 75mm each 3 mtr long make prince or finolex or supreme , rcc pipe heavy duty type type np 3 of 1000mm internal dia with collars and length 2 point 50m , portable collapsible protective wall baskets galvanized welded mesh frame 2 cells per set of size 1 point 232 by 0 point 616 by 0 point 759 mtr

Frp Pipes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government / Public Sector

State Government

corporations/Associations/Others