Latest galvalume sheet scrap Tenders | Government galvalume sheet scrap Tenders

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

CTN :39010864

10 Mar, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of ppgi sheet and accs - ppgi sheet 8 ft long , 3.5ft width , painted galvanized steel sheets as per is 14246 , thickness - 0.6mm , base metal shall be having minimum yield strength of 250 mpa grade as per is-513 , galvanized to grade 275 as per is 277 , durability of paint -category 3 as per as or nz 2728. , ppgi sheet 10ft long , 3.5ft width , painted galvanized steel sheets as per is 14246 , thickness - 0.6mm , base metal shall be having minimum yield strength of 250 mpa grade as per is-513 , galvanized to grade 275 as per is 277 , durability of paint -category 3 as per as or nz 2728. , ppgi sheet 12ft long , 3.5ft width , painted galvanized steel sheets as per is 14246 , thickness - 0.6mm , base metal shall be having minimum yield strength of 250 mpa grade as per is-513 , galvanized to grade 275 as per is 277 , durability of paint -category 3 as per as or nz 2728. , ppgi ridge sheet - 40 nos , size - 400 x 2440mm , painted galvanized steel sheets as per is 14246 , thickness - 0.6mm , base metal shall be having minimum yield strength of 250 mpa grade as per is-513 , galvanized to grade 275 as per is 277 , durability of paint -category 3 as per as or nz 2728. , ppgi sheet screw - self drilling screw 40mm length , point type - c , slotted raised countersunk -oval head tapping screw as per is 7169 latest , thread size-st 4.2 , rectangular section 2 inch x 1inch - 20 ft long as per is 4923 , size - 50.0 x 25.0 x 3.2 mm , depth - 50.0mm , width - 25.0mm , thickness - 3.2mm , weight - 3.24 kg per m , grade yst 310 , gi pipe 1.5 inch (40mm) -20 ft long or 6 mtrs as per is 1239 , medium , bore diameter - 40mm , wall thickness - 3.2mm , screwed and socketed , mass of tube 3.6 kg per m , galvanised

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39518564

11 Mar, 2025 5.36 Lacs

Bokaro - Jharkhand

Tender For electrical repairing / re-wiring and changing of electrical items of 9.0 office, konar river side pump house (2 nos.) and civil office under kathara colliery. - wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required. group a , supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 meters long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60cm), 7/4.00 mm dia g.i stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 oarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling as required. 2. group b , wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required.3. group c , supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 1). 5/6 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 2). 3 pin 5/6 amps socket out let, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 3). 15/16 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 4). 6 pin 15/16 amps socket out let, supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., supplying and fixing followings way, single pole neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, completed with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without mcb/rccb/isolator).i) 2 + 4 way / 8 way, double door, supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inclusive for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. i) single pole and neutral., wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. i). 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. ii). 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire, wiring f

corporations/Associations/Others

CTN :39495189

19 Mar, 2025 NA

Surat - Gujarat

Tender For procurement of different types of material. (annual ratecontract) - bucket 22 gauge,10 ltr capacity,20 gauge galvanized sheet, bucket (baldi) well reveated and with strong handel, crow bar(naraj) thickness:28 mm,lenght :1.50 mtr , material:m.s , shape:-octangular,weight:7.00 kag approx, painted with red color, handle for spade (pavda)wooden handle 2 6 long, handle for pick -axe (trikam) wooden handle 2 6 long, sovel with handle sovel made form good quality steel. weight 1.80 kg. approx handle length equals 700 mm with hand grip weight equals 0.750 kg approx., sutli good quality sutli, lock 6 lever godrej brand freedom padlock 6 lever lock with 2 key, lock 7 lever godrej brand freedom padlock 7 lever lock with 2 key, caution tape red and white caution tape (plastic) 3"" wide with tubing minimum gauge 125 micron. marked "" surat municipal corporation "" 1 role equals 300 mtr., tarpaulins hdpe (small) colour - blue, size: 5.0 x 3.0 mtr. with lamination tightening arrangement at all four corners , embossed with s.m.c. mark. weight : 1.750 kg.

CTN :39419042

13 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For supply of pvc union , glue adhesive for pvc 50 ml , sunmica sheet 08ft x 4ft , fiver flush door 3ft x 7ft with frame , steel charpoy , floor tiles size 1ft x 1ft , white cement , precoated corrugated galvanized sheet 10ft x 3ft

CTN :39421586

13 Mar, 2025 26.41 Lacs

Bareilly - Uttar Pradesh

Tender For supply of misc items - aluminium door handle 100mm , aluminium door handle 125mm , aluminium door handle 150mm , aluminium door stopper single rod with rubber bush , aluminium sliding door bolt aldrop 200mm long , aluminium tower bolts 100mm , aluminium tower bolts 150mm , aluminium tower bolts 200mm , brass bib tap 15mm internal thread , brass gate ball valve size 15mm , brass gate ball valve size 20mm , brass gate ball valve size 25mm , brass spindle square type 15mm , brush paint 25mm , brush paint 50mm , brush paint 75mm , cp connection 15mm bore , cp d type handle 100mm , cp d type handle 75mm , cp extension nipple 15mm 1 inch external thread , cp extension nipple 15mm 1.5 inch external thread , cp extension nipple 15mm .75 inch external thread , cp grating 100mm , cp grating 125mm , cp grating 150mm , cp stop cock 20mm external threaded , cp stop cock 20mm internal thread , cp waste coupling 32mm , curtain rod bracket 25mm dia , curtain rod knob 25mm dia , cushion for sofa set size 21inchx22inchx4inch thick with coverd fabric , door closer aluminium body hydraulically regulated designation no 3 universal type suitable for door shutter of weight 61 to 80 kgs , foam sheet 6ftx3ftx100mm , foam sheet 6ftx3ftx75mm , galvanized mild steel wire mesh 0.50 nominal dia of wire and average width of aperture 1.18mm and 1.2 mtr wide , gl bend medium with one socket screwed 15mm dia , gl elbow medium grade 15mm dia isi marked , gl elbow medium grade 20mm dia isi marked , gl elbow medium grade 25mm dia isi marked , gl elbow reducing medium grade isi marked size 20 x15mm , gl elbow reducing medium grade isi marked size 25 x15mm , gl hex nipple 15mm , gl hex nipple 20mm , gl nipple medium grade 15x100 mm long , gl nipple medium grade 15x150 mm long , gl nipple medium grade 15x200 mm long , gl nipple medium grade 15x300 mm long , gl nipple medium grade 15x75 mm long , gl nipple medium grade 20x100 mm long , gl nipple medium grade 20x150 mm long , gl nipple medium grade 20x75 mm long , gl nipple medium grade 25x100 mm long , gl nipple medium grade 25x75 mm long , gl socket medium grade isi marked 15mm , gl socket medium grade isi marked 20mm , gl socket medium grade isi marked 25mm , gl socket reducer 20x15mm , gl socket reducer 25x15mm , gl socket reducer 25x20mm , gl tee equal medium grade screwed isi 15mm , gl tee equal medium grade screwed isi 20mm , gl tee equal medium grade screwed isi 25mm , gl tee reducing medium grade isi 15x20mm dia , gl tee reducing medium grade isi 15x25mm dia , gl union medium grade complete isi marked 15mm , gl union medium grade complete isi marked 20mm , gl union medium grade complete isi marked 25mm , handle soft pu for chair revolving , knob anodoised 25mm with screws for drawer , knob anodoised 32mm with screws for drawer , lock brass for drawer with keys for table steel , lookig mirror of size 450 x 600 x 5mm thick with 9mm plywood back and aluminium beading , looking mirror 5mm thick with ply wood back 9mm thick 375x1200mm , looking mirror 5mm thick with ply wood back 9mm thick 375x750mm , plywood bwr commercial grade of size 7ftx3ftx12mm , plywood bwr commercial grade of size 8ftx4ftx12mm , plywood bwr commercial grade of size 8ftx4ftx4mm , plywood bwr commercial grade of size 8ftx4ftx6mm , plywood general purpose one side teak face bwr commercial grade of size 8ftx4ftx4mm , plywood general purpose one side teak face bwr commercial grade of size 8ftx4ftx6mm , prelaminated mdf board, size 8ftx4ftx18 or19 mm th , ptmt flushing pipe for low level flushing cistern 32mm dia , ptmt grating 100mm dia , ptmt grating 125mm dia , ptmt grating 140mm dia , ptmt grating square 150mm with hole , ptmt stop cock 15mm external thread , ptmt stop cock 15mm intenal thread , pvc cabinet mirror for bathroom , pvc cistern fitting kit complete for low level flushing system , pvc float valve 15mm with fitting , pvc float valve 20mm with fitting , pvc seat for chair dinning map , pvc towel rail 450mm , red oxide primer 1st qu

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

CTN :39383609

12 Mar, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of sdles chd-niv-02-chd sheet steel corrugated galvanized length , cn 8465-000078 frog cutter wire folding mmk i , j1 7240-000024 bag basin camp , h4 8115-000142 boxes rigid collapsible covered , k5 7920-000019 brushes scrub hand union

Galvalume Sheet Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

corporations/Associations/Others

State Government