Latest galvanized iron Tenders | Government galvanized iron Tenders

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

State Government

CTN :38599156

27 Dec, 2024 94.20 Lacs

Jaisalmer - Rajasthan

Tender For supply of rcc cement pillar size 1.8 meter height including preparation of reinforcement, compaction, curing and putting f.d. mark on post (concrete mixture of 1 2 4 reinforcement of 4 iron rods with 4 rings of 6 mm tmt and providing 3 hooks of iron)

CTN :38602440

06 Jan, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of roofing with corrugated galvanized iron sheet

CTN :38183179

18 Dec, 2024 NA

Leh - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of corrugated galvanized iron sheet 8ftx 3ftx 63mm

Central Government/Public Sector

CTN :38569593

07 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of galvanized iron slotted hexagonal head bolt of size m6 x 25 mm fully threaded with hexago nal nut as per is 1364-2002, with suitable 2 nos. of flat washers as per is:2016-1967 and 1 no of spring w asher as per is 3063-1972. material should be supplied in assembled condition [ warranty period: 12 mo nths after the date of delivery ]

Central Government/Public Sector

CTN :38569174

26 Dec, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of galvanized iron square plate washer size 35 mm x 35mm x 2 mm thickness with 16 mm diameter center hole, conforming to is 2016 latest. ]

CTN :38513583

30 Dec, 2024 NA

Lucknow - Uttar Pradesh

Tender For the supply of veterinary equipments/machineries and instruments to the department of animal husbandry, govt. of up - name of equipment/instruments & specifications, automatic vaccinator bottle and vial attachment, pressure dose adjustment from 0.5ml to 5ml, luer lock needle nozzle with spare service kit., california mastitis test kit complete kit made of polypropylene with 4 mixing chambers and full grip handle including reagent, reagent dispenser and test colour standard chart, cattle crush tubular, made of g.i. pipe with outside diameter 60mm, height of front & back pillar 1980 mm, length & breadth of cattle crush be 1830 x 877 mm respectively. all four pillars should be provided holes at 75mm distance from bottom and be provided with round bars of 12mm diameter & 300 mm long, side pillars be joined by 2 tubular beams having 60 mm outside diameter, the insided distance between the two beams being 477 mm. the two sides of beams should be supported by two g.i. pipers of 48 mm diameter. lower side beam at 1223 mm height and upper side beam at 1700 mm height. circular 1 inch painted marking on all four pillars at the height of 450mm from below to indicate ground fill / fixation. cattle crush should also be provided with an adjustable gate to open sides. gate should consist one sliding g.i. pipe on two horizontal pipe of 60mm outer diameter to secure the neck of animal. two extra g.i. pipe 1.2 mtr. long of 60mm outer diameter should be provided for the backsides. two metalic loops on each side vertical rear pillar to control cattle from backside be provided. all the g.i. pipes used should be of isi mark a class with visible isi mark on every meter of pipe. all the joints should be electrically welded. (note-weight of the cattle crush should comply with the norms of the isi mark, a class gi pipe standard of specified diameters with variable maximum/minimum permissible limits)., chuck with key (orthopaedic) s.s. -304, 20cm, dehorning saw with detachable blades 45 cm, dog muzzels -standard, dressing forceps (s.s.-304) 25cm, dressing forceps (s.s.-304) 15cm, electric dehorner 30 cm length, portable electric sterilizer (ss 304), 30cmx15cmx20cm-1500 watt, enema pump (veterinary) reedis standard, firing iron set (conical,line,pin), forceps s.s. -304 15cm, forceps s.s. -304 17.5cm, forceps s.s. -304 20cm, formalin chamber with 100 formalin tablets non corrosive,standard, 20"x 8"x 8", gerlach/ buhner vulva suture instrument ss -304,18 cm, grays mouth gags for dogs ss-304, 11cm, grays mouth gags for dogs ss-304, 14cm, grays mouth gags for dogs ss-304, 16cm, haver sac bag 18"ht. x18"length x6" width, hog catcher standard, instrument tray s.s. -304with lid 250mmx300mm, instrument tray s.s. -304with lid 350mmx300mm, intra medullary bone pins assorted size, long forcep (ss-304) 45 cm, metal catheter for bitch standard, mouth gag for cattle standard, ointment slab porcelain 20 cmx20 cm, operation table for small animals-1- operation table for small animals suitable for general surgery ss hydraulic o.t. table, five section ss top and heavy base and column. all sections covered with mattresses. height adjustable range ( in mm ): 75mm to 1000mm, trendelenburg: 30 degree, max. load 120 kg , table lenght 1830mm, table width 497mm, height adjustable, back rest up 80 degree/dowm 25 degree, lateral tilt 20/20 degree , head rest up 20 degree/down 60 degree, trendelenburg reverse 25 degree, orthopedic saw, (ss-304) 30 cm with adjustable blades, otoscope and opthalmoscope set otoscope and opthalmoscope set of good quality and for veterinary use. it should be batteries operated and easy to handle, otoscope head with 4x magnification, 3 specula of size 80mmx6mm, 58mmx5mm, 80mmx4mm with one spare bulb, one opthalmoscope head., plaster cutting saw s.s. 4cm wide 20 cm., post mortem kit for poultry-scissors mayos ss, 20cm-2, scissors mayos ss, 15cm-2, long forceps ss 20cm-2, magnifying glass, 6cm dia-2, bone cutter ss, 20cm-1, b.p. handle ss, no

State Government

CTN :38526225

18 Dec, 2024 47.00 Lacs

Jaisalmer - Rajasthan

Tender For supply of rcc cement pillar size 2.4 meter height including preparation of reinforcement, compaction, curing and putting f.d. mark on post (concrete mixture of 1 2 4 reinforcement of 4 iron rods with 4 rings of 6 mm tmt and providing 4 hooks of iron)

State Government

CTN :38526227

18 Dec, 2024 1.84 Crore

Jaisalmer - Rajasthan

Tender For supply of rcc cement pillar size 1.8 meter height including preparation of reinforcement, compaction, curing and putting f.d. mark on post (concrete mixture of 1 2 4 reinforcement of 4 iron rods with 4 rings of 6 mm tmt and providing 3 hooks of iron)

CTN :38532647

01 Jan, 2025 NA

Darjeeling - West Bengal

Tender For supply of tmt bar fe 550 grade 8 mm dia,tmt bar fe 550 grage 10 mm,plywood 8 ft 4 ft 18 mm bwr grade,cement opc ppc in poly bags of 50 kg each,sand coarse conforming to is 383,stone aggregate coarse 20 mm conforming to is 383,stone aggregate coarse 40 mm conforming to is 383,quick setting compound conforming to is 8041 1990 barrel of 225 kgs,110 mm hdpe pvc pipe,plain galvanized iron sheet,40 mm thick polymer board grade a of size 500 mm wide,two coats of cement base paint over one coat of primer for wall surface,store list of tools

Galvanized Iron Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government