Latest gantry repair Tenders | Government gantry repair Tenders

CTN :38982857

30 Jan, 2025 5.43 Lacs

Thiruvananthapuram - Kerala

Tender For supply of materials for kalivilakam ward anganwadi construction - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), fine sand (zone iv), bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel screws 50 mm, mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, oxidised mild steel tower bolt (barrel type) 200x10 mm, oxidised mild steel screws 30 mm, oxidised mild steel handles 125 mm, oxidised mild steel screws 25 mm, brass 100 mm mortice latch and lock with 6 levers without pair of handles, pair anodised aluminium lever handles for 100 mm mortice latch and lock, 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish, 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish, iron hooks & eyes 100 mm, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc bend 110 mm dia

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :39124286

10 Feb, 2025 NA

Damanjodi - Odisha

Tender For structural erection work on labour contract basis related with civil and steel structural works for 5th stream alumina plant at damanjodi odisha and related facilities at vishakhapatnam port on lab-contract basis

CTN :39086622

31 Jan, 2025 8.39 Lacs

Karnal - Haryana

Tender For const of miscellaneous work in ward no 10 assandh (only for landc society ltd) - [13.29.2]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [through rate], [17.14.2]granular sub-base with close graded material - (table:- 400-1) plant mix method construction of granular sub-base by providing material as per grading iii (table 400-i of mortandh 5th revision) mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of mortandh specifications 2. grading ii material [through rate], [17.69.2]interlocking concrete block pavement 2. providing and laying 80 mm thick isi marked interlocking paver blocks conforming to is 15658:2006/irc sp 63: 2004 of all shapes and colours in design mix cement m 40 over the bed of 30 mm thick fine sand complete in all respect. [through rate], [17.70]removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. [through rate], [17.71]relaying of available (removed and stacked) interlocking paver block pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and technical specification clause 1504 [through rate], [26.4.1]site clearance 1. excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material, lead up to 50m and lift up to 1.5 m, disposed material to be neatly dressed [through rate], [5.23.2]demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [through rate], [6.1.1]providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 1. 1:1 :3 (1 cement: 1 coarse sand (zone-iii) : 3 graded stone aggregate 20 mm nominal size) [through rate], [9.57.3]providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 3. 150 mm diameter [through rate]

CTN :38941979

01 Feb, 2025 4.90 Lacs

Sagar - Madhya Pradesh

Tender For invited rate for supply and installation of triple dustbin (structural steel work) at various place under municipal council bina etawa

CTN :38969985

30 Jan, 2025 2.00 Lacs

Kishtwar - Jammu And Kashmir

Tender For corrigendum : park ward no. 5, village filler, block thakraie, kishtwar - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:., rr stone masnory laid (1:6) mix, providig and laying vetrified floor tiles, pproviding and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in steps., steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, and 2 chair 45 kg one chair =90 kg, centering and shuttering including strutting, propping etc. and removal of form work for: foundations, footings, bases for columns, c/o stone as avg distance 1.00 km by at, c/o sand anaverage distance by 30 km by mt, c/o bajree anaverage distance by 30 km by mt, cib ( ommunity information board

Central Government/Public Sector

CTN :39074414

03 Feb, 2025 NA

Bokaro - Jharkhand

Tender For civil structural and architectural work including piling pile cap and civil dismantling works for replacement of 4 nos battery cyclones with 4 nos. esps for sinter plant 1 at sail bokaro steel plant

Central Government And Public Sector

CTN :39070163

14 Feb, 2025 5.22 Lacs

Kalpakkam - Tamil Nadu

Tender For providing of facility management services - lumpsum based - industrial; o&m of mechanical work, erection of hdpe piping and pipe fittings or weldingfabrication of piping or structural steel works in any industry or organisation or installation of piping or struct..

State Government

CTN :39074298

06 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement , collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5 , hire charges wall form panel 1250x500 mm , hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip , hire charges m.s.tube 40mm dia , supply of twisted steel / deformed tmt bars fe-500d , supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a , supply of bitumen solution primer of approved quality , supply of dehradun white lime , supply of welding by electric plant , supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer , supply of galvanised steel j or l hooks 8mm dia , supply of precoated galvanised iron profile sheet 0.5mm tct , supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists , supply of iron pintels including welded pin , supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer , supply of c.i.pile shoe , supply of m.s.clamps for pile shoe , hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete. , hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete. , hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete. , hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete. , hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et , production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete. , supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :39077876

07 Feb, 2025 NA

Mumbai - Maharashtra

Tender For mow providing and fixing by construction of structural steel and shed work to storage room at terrace floor to mortury at g.t. hospital mumbai.

Gantry Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government