Latest garnet paper Tenders | Government garnet paper Tenders

State Government

CTN :41052738

04 Aug, 2025 67.93 Lacs

Gandhinagar - Gujarat

Tender For supply of spares for bottom ash handling system of ash plant - unit no.3, 4 & 5 at gandhinagar tps. - shoulder bolt with lock plate for assembling part no.8 (part no.9) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., cross brace (part no.11) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., resilient gate face p.no-2,for bottom ash hopper,drg 8743/2b/571, shoulder bolt with lock plate for assemblying part no.8 (part no.9) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, cross brace (part no.11) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, gate face 1 set consists of ss:316 gate face with m.s back up plate of 24x24 squire bottom feed gate of unit no. 5, cam segment p.no-1 for 33"x30 excen crusher, front wear plate/anvil plate of 33" x 30" clinker crusher / grinder assembly for unit-3and4 (1 set equals to 3 nos.)., back wear plate/plate combing (part no. 6) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 3 nos.)., side wear plate(part no. 8) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 2 nos. left hand and 2 nos. right hand wear plate)., shaft with shaft structure and shaft sleeve of 33" x 30" clinker crusher / grinder assembly for unit-3 and 4., 33"x30" single roll clinker crusher / grinder complete assembly without drive arrangement, fluid coupling, chain drive and driven sprocket as per dwg. no.8743-2b-582(rev-1) for unit-3and4, feedsump below clinker crusher for unit no.3 and 4, roll (cam segment) 1 setequals to 8 nos. cam segment of single roll crusher for unit no. 5, front wear plate/anvil plate (part no.3) 1 set consists of 3 nos b front wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, back wear plate/plate combing (part no.6) 1 set consists of 3 nos back wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, side wear plate (part no.8) 1 set consists of 2 nos. left hand and 2 nos right hand type of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, shaft with shaft structure with shaft sleeve(part no.2 and15)for clinker grinder., bearing support (part no.8) of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, single roll crusher complete assembly without drive arrangement,fluid coupling,chain,drive and driven sprocket of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, feed sump of bottom ash system of unit - 5 as per drawing no. 95p10 - t - 1b - 711, complete assembly of feed gate housing with feedgate, access door for unit no.3 and 4, bearing housing of dcips make 33" x 30" clinker crusher/grinder, locking plate for 600 dia. round access door for bottom ash hopper, nozzle with ceramic tip(part no. 2)tip size- 36 mm of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), aligning ring(part no. 10)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), half clamp(part no. 11)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 9" flange clamp half (part no. 18) of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 8" jet pulsion pump complete assembly without tail pipe for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), nozzle with ceramic tip size 34 mm of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, aligning ring (part no.10) of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, half clamp (part no.11) 1 setequals to 2 nos of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, 9" flange clamp half (part no

CTN :40685472

14 Jul, 2025 NA

Siliguri - West Bengal

Tender For bid to ras bid to ras tender for supply of proc of ord store e e - j1 7105-000021 stool camp mark-1 , j1 knd niv camp 63 f outer with pv dd fabr for tefs 2m unit , h2 ihb-0207 musline blue 91 cm , f1 5120-003046 1 ring spanner 19x22 metric p 668 , k6 knd niv bk 81 wet masala grinder

CTN :40794003

19 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of spanner adjustable 15 cresent type , steel strapping 1/ 2 , cutter insulator , screw driver double ended large all metalforked 1/ 4x3/ 16ga , plier circip , handle socket spanner nut spanner type hinged 3/ 4 sq. drive , screw driver cabinet 75mm , spanner , spanner tubular box de and unitrust with bs 1/4x5 /6 , spanner socket 3/ 4 sq x 17/ 8 af , socket socket spanner 3/8 39 44 a/f , spanner socket 1/2 sq drive 106 a/f , socket socket spanner 75 a/f , spanner socket 3/ 4 sq , spanner socket 3/ 4sq x 1 1/2 af , wrench allen head 3/4in.af , spanner ordinary series 1 / 2 x7/16 , spanner open jaw double ended ba spearhd type size 1x3 , spanner o j de spearhead bsw1/4 x5/ 16 ord ser , spanners ring bihex double ended size 3/16 x 1/4 in , spanner open ring 7/ 16 x 3/ 8 , spanner open ring 5/8 x 11/16 , spanner tubuler box 7/ 8x 1.1/ 16 , spanner box 10x8 ba , spanner box 7x5 ba , spanner box tubular box double ended metric size 6x7mm , spanner socket 3/ 8 , spanner socket a/f range b1 hex 3/ 8 sq.driver 50 , spanner socket bi-hexagonal 1 /2 square driver across flat , spanner socket 1/ 2 sq x 7/ 8 , spanner socket 31439-144 a/f , spanner socket , power bit set (161 pieces) , spanner 160x18mm overall length closed crescent type , spanner open jaw double ended b.a. spearhd type size 4x5 , spanner double ended open jaw slim series bs 1/ 4 x 5/16 , spanner b1 hex ring type eranked de 1/ 100 a/f 44 x50 , spanners ring bihex double ended cranked 15/16 x 1 , spanner ring bihex double ended cranked metric 16x17mm , spanner ring bihex double ended cranked metric 24x26 mm , spanner ring bihex double ended cranked metric 30x32 mm , spanner tubular box double ended size 14mm x 15mm. , spanner tubular box de 20mm x 22mm. , spanner box tubular box double ended metric size 8x9mm , 7 angle grinder , electric wire brush , cup wire brush 70 mm hss , saw blade hack hand hard fine 300 mm

Central Government And Public Sector

CTN :41003699

29 Jul, 2025 NA

Angul - Odisha

Tender For tender for supply of spares of clinker grinder d d - roller part no12 , roller part no13 , roller bearing part no14 , angle , driving sprocket , driven sprocket , driving shaft , driven shaft , shaft sleeve , driving gear pt no 55201301 , brgassy non expansionclinker grinder , split lantern ring , wear plate , bearing assembly expansion for clinker , feed sump for unit7 cg

State Government

CTN :40967489

29 Jul, 2025 NA

Kheda - Gujarat

Tender For supply of various type of spares for ash handling system of unit 1 to 7 at wtps. - slide gate for 4" segregating slide valve, p.no 124-301/305, slide gate, part no. 128301/01, 8" segregating slide valve, flexible hose pipe : i.d. : 1/2 ", flexible hose pipe : id:3/8", flexible hose pipe : i.d. : 3/4 ", wear ring, part no. 55231101 of 2x3 wide clinker grinder, 6" adaptor coupling discharge side for warman ash slurry pump, 8" adaptor coupling with nut-bolts for suction side of 8/6 warman ash slurry pump, adaptor coupling used between 10 ci pipe & 10 kgv, ms sleeve for esp hopper

CTN :40447613

12 Jul, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of workshop equipments - cnc lathe machine , cnc milling machine , universal milling machine , surface grinder , slotting machine , lathe machine norton type , lathe machine precision type , heavy duty lathe machine capstan lathe , hand sheet cutting machine , drill machine , tool and cutter grinder machine , hydraulic hacksaw machine , pillar drilling machine , pillar drilling machine 40mm , bench vice 6 inch , hand vice 4 inch , pipe vice 3 inch , g clamp 6 inch , ball peen hammer 800 g , straight peen hammer 1 kg , cross peen hammer 800 g , flat chisel , round nose chisel , solid frame hacksaw , adjustable frame hacksaw , 10 inch flat files , 10 inch square files , 10 inch triangular files , scraper 8 inch , tap and die set , drill bits , hacksaw blade , tin cutter , steel rule 12 inch , try square 12inch stainless steel blade , scraper 6inch , combination set , calipers 10 inch , anvil 50 kg cast iron , slip gauge complete set metric 87 or 103 blocks of grade 1 steel , vernier calliper 300mm , vernier calliper 200mm , vernier calliper 150mm , inside vernier calliper 150mm , vernier calliper digital , vernier caliper dial , screw vernier caliper , vernier height gauge 300mm , vernier gear tooth caliper 0.02mm resolution , micrometer outside 0-25mm , micrometer outside 25-50mm , micrometer outside 50-75mm , micrometer outside 75 - 100mm , inside micrometer 25mm , inside micrometer 50mm , v anvil micrometer 10-25 mm , digital micrometer 25mm , vernier micrometer 25mm , depth micrometer 0- 100mm , gear tooth micrometer 25mm , sine bar complete set , sine centre complete set , vernier bevel protector , straight edge , radius gauge , feeler gauge , screw thread pitch gauge , thread plug gauges , plain plug gauges , ring gauges , snap gauges , outside firm caliper 6 inch , inside firm caliper 6 inch , outside transfer firm caliper 6 inch , inside transfer firm caliper 6 inch , outside spring caliper 6 inch , inside spring caliper 6 inch , hermaphrodite caliper 6 inch , combination set 12 inch , surface plate , autocollimator , two wire and three-wire thread measuring instrument , dial indicator 50mm 0-8mm 0-10mm , magnetic stand , wood turning lathe machine , surface planer machine , circular saw , jig saw machine , band saw , belt sander , compound mitre saw , drill press , dust collector , 3hp table top router , thickness planer , plunge router , disc sander 5 inch , four fold rule wooden type , steel tape 3 meter , spirit level iron 6 inch , hand saw 16 inch , tenon saw 10 inch , firmer chisel 1 inch , bevel chisel , mortise chise , mortise chisel , iron jack plane 14 inch , drill bit , claw hammer 340 gm , mallet hammer , ball pen hammer 800gm , bench vice number 4 , screw driver 200 mm blade , pincer 8 inch , scraper 6 inch , oil stone sharpening stone , inverter based pulse tig dc welder , inverter based mig welding outfit , inverter based arc welding rectifier , gas welding with all accessories , welding simulator , welding helmet , welding torch , welding regulator for oxygen co2 acetylene , flash back arrestor , gas welding torch , gas heating torch , electrode holder , welding gloves , welding apron , leg guard , hand hammer 800gm with handle , double ended sledge hammer of 2 kg head , tongs , anvil , punch , chisel , flatter and set hammer , top and bottom swages with rod handle for top , top and bottom fuller with rod handle for top , heart tools

CTN :40974051

16 Jul, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of pipe cutter 3 wheel type size half inch to two inch , pipe wrench 12inch long adjustable 300mm , overall combination for trademens , grinder size 150mm , combination player 200mm , heavy duty pipe wrench 600mm , rubber boot for electrician , set of spare cut blade for bolts , screw driver set 88inch , chain pipe wrench 150 mm , plastic bucket 15 ltr , screw driver kit 5 pcs set , pipe die set complete , pipe utter with two roller and cutting wheel of size half inch to three inch , die set 32 40 50 mm , long nose player 200mm , handsaw frame with blade , drill hack 17inch with lather grip and sleeve on ledge , rotary pump with pipe 1inch , shovel with handle plastic d shape , ganti with handle , screwdriver set , bolt cutter , set of spare blade for bolt cutter , pipe wrench 115 8inch , pipe wrench 115 10 inch , pipe wrench 115 12 inch , adjustable wrench 66 s 150 mm , adjustable wrench 66 s 200 mm , combination ring open end spanner , biexagon ring spanner size 6x7 , ring spanner deep off set pattern grip size 8x9 , ring spanner deep off set pattern grip size 10x11 , ring spanner deep off set pattern grip size 12x13 , ring spanner deep off set pattern grip size 14x15 , ring spanner deep off set pattern grip size 13x17 , ring spanner deep off set pattern grip size 14x17 , ring spanner deep off set pattern grip size 16x17 , ring spanner deep off set pattern grip size 17x19 , ring spanner deep off set pattern grip size 18x19 , ring spanner deep off set pattern grip size 19x22 , ring spanner deep off set pattern grip size 20x22 , bulk type water meter 15 mm size , clamp meter 2 mea ohm , digital clamp meter ) /bid number : gem/2025/b/6418904 * /dated: 05-07-2025 & & / bid document 1 / 32

CTN :40978781

14 Jul, 2025 NA

Bathinda - Punjab

Tender For supply of sliding puller , oil drain tray small , oil drain tray large , 10 ton hydrolic jack , ring clamp , fast charger battery , duoble wheeled bench grinder machine , grinder machine , cutting plier

CTN :40974410

11 Jul, 2025 NA

Gurdaspur - Punjab

Tender For supply of emery paper girt 320 water proof make asian paints , emery paper girt 400 water proof make asian paints , banjo washer with rubber size 10 mm , banjo washer with rubber size 12mm , banjo washer with rubber size 14mm , banjo washer with rubber size 17mm , banjo washer with rubber size 19mm , banjo bolt 10mm , banjo bolt 16mm , banjo bolt 17mm , banjo bolt 19mm , cleaner cl 96 developer dv 98 and penetrant pt 97 make checkmate super 330 ml each bottle , valve grinder paste 100gm superior quality , safety goggles for trades men working in machine shop and ancilary shop. , champer tools , paint marker white , paint brush size 3 inch for honing machine , banjo washer 8mm for beml engine , different size o ring for engines , valve grinder stick , metal paint marker pen type orange, yellow , white , wire brush good quality for engine cleaing , transpatent nylon wire coated pipe 30mm size for beml engines , banjo washer rubber coated 8mm size for beml engines , fip mtg gasket , feed pump gasket , governor gasket , injector sealing copper washer 1.5 mm thickness , injector sealing copper washer 2.00 mm thickness , injector sealing copper washer 3.00 mm thickness , sim for injector , sand for short blasting machine cleaning turbo charger ) /bid number : gem/2025/b/6403816 * /dated: 05-07-2025 & & / bid document 1 / 26

Central Government/Public Sector

CTN :40961496

25 Jul, 2025 NA

Bharuch - Gujarat

Tender For supply of bihexagonal ring spanner set of 12pcs s* , double open end spanners with rib set* , combination spanner 8mm to 32mm , bihexagonal 21sockets setv8 to 32mm chrome vanadium st in metal box 22soc & 5accs. is-7 , tubular spanner in set of 12 size 6x7mm to 30x32mm , heavy duty pipe wrench 12" , pipe wrench 18" , pipe wrench heavy duty 24" , pipe wrench l-1200mm , sledge hammer 20 lb , sledge hammer with handle 15 lb , sledge hammer with handle 10 lb , hammer with handle 6 lb , ball pin hammer 1 lb , adjustable wrench 8" , adjustable wrench 12" , double open end spanner 36x41 , double open end spanner 41x46 , chain pipe wrench 920mm x585mm , chain pipe wrench 1100mmx834mm , chain pipe wrench 1200mmx1100mm , chain pipe wrench 1610mmx1360mm , file 1/2 round 2 cut (2cut) 10 in , file flat 2 cut (2ble cut) 12in , flat file smooth 12" , needle file set , triangular file 12" , screwdriver, 300 x 10 mm , screwdriver flat blade 10x450 , long nose plier 6 in insulated , 7" external circlip plier , ratcheted torque wrench 7 to 35 kg- m , torque wrench cap100-400lb. ft 3/4" sq. dr , air ratchet wrench 1/2" sq dr , pneumatic impact wrench 1/2" sq. dr. , angle grinder 4" , grinder hand small (straight) , cutting pliers insulated handle , tool box with lock , allen key set 2 mm to 20 mm , allen key set 1/16 to 1/2 in , flat cold chisel 1x10 in , spirit level 18" , measuring tape 5 mts , insulated plier 8" with side cutter , screw driver , 10" engineers screw driver blade 8mm , polend type heavy duty hack saw fram 12" , screw driver set with tester , manual crimping tool upto 25 sq mm , cable stripper upto 5 sq mm , vice grip plier 230/250 mm , knife 6" , flat file rough 8" , round file rough 8" , half round file rough 8"

Garnet Paper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

Central Government/Public Sector