Latest gas compressed argon Tenders | Government gas compressed argon Tenders

Central Government/Public Sector

CTN :40529577

04 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of liquid petroleum gas (industrial use) for metal cutting in 19kg pack each cylinder [ warrant y period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40347215

03 Jun, 2025 NA

Secunderabad - Telangana

Tender For corrigendum : supply of metal cutting gas (lpg) for metal cutting and brazing application in 19 kgs capacity returnable cylinders as per spec no.is:45 76-1999.safety item. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40462302

30 May, 2025 NA

Kota - Rajasthan

Tender For supply of metal cutting gas cylinders (each cylinder containing 19 kg+300 gms.. make- bharat, ioc, i ndane/ similar (delivery up to the point.) note- cylinder is required in bunch of 07 nos. each. total 42 nos. cylinder is required every month. [ warranty period: 30 months after the date of delivery ]

CTN :40361788

06 Jun, 2025 NA

Samba - Jammu And Kashmir

Tender For supply of mt store - centre locking system repair , ac repair and gas refilling , main shaft metal filling cutting balancing and overhaul , lay shaft repair and gear box overhaul , transfer case overhaul and brake drum skimming

Central Government/Public Sector

CTN :40402998

30 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For handling and positioning of raw materials, housekeeping and machine cleaning at foundry-1 910002479 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance in moulding section in all shifts. mixing,shifting and positioning of moulding sand and other operational consumbles of moulding section including material collection from stores. 6,666.000 mdy,. 2 910002480 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry:cleaning and spillage removal of sand plant area; both over and underground; including 22 nos belt conveyors, 8 nos bucket elevators,sand aerators, mix mullers etc including tunnels 1,818.000 mdy, 3 910002481 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: housekeeping and m/c cleaning and spillage removal of moulding machines, tool room m/cs, de systems like scrubbers,cyclone,bag filters etc and other connected equipment 1,212.000 mdy, 4 910002482 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance and cleaning at pattern shop including cleaning of m/cs and shop floor and house keeping in pattern storage area and designated areas outside pattern shop 1,212.000 mdy, 5 910002483 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: cleaning and house keeping at moulding and melting areas including material storage areas in all five bays( an area of 11,232 sq mtrs) and cleaning of office buildings 1,818.000 mdy, 6 910002484 supply of sw for welding and fabrication works including gas cutting and welding for mould box repair, mould box reinforcement and spillage metal removal from mould boxes and reuse of boxes 1,818.000 mdy, 7 910002485 supervisor:(to supervise all the above jobs and to co ordinate with the engineer or his representative for daily works and deployment) 606.000 mdy, 8 910002478 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance in melting section in all shifts, cleaning of ladles,ingot mould assembly and other connected melting jobs including collection of materials from other departments and stores etc. 4,242.000 mdy.

Central Government/Public Sector

CTN :40366079

04 Jun, 2025 NA

Solapur - Maharashtra

Tender For supply of liquified petroleum gas for industrial use in 19 kgs. capacity cylinders in fi rms own cylinders and empty cylinders on returnable basis confirming to is 4576/1999 with latest revision / amendments, if any. (note :- liquified petroleum gas for industrial use must be suitable for metal cutting purpose in railway workshop ). [ warranty period: 30 month s after the date of delivery ]

Central Government/Public Sector

CTN :40345215

05 Jun, 2025 46.32 Lacs

Nagpur - Maharashtra

Tender For custom bid for services - wet leasing of welders with accessories for attending welding works of electric locomotives at elsaq for period of 02 years: a schedule 1- activity basedi. machine shop section 1 repairing of loco pilot seat 700 nos. 2 providing transducer protection cover 200 nos. 3 loco side buffer revit cutting 860 nos. 4 loco side buffer reviting 860 nos. 5 tmb dome repairing 100 nos. 6 conservator shifting bracket fabrication 100 nos. 7 conservator shifting bracket fixing in loco 100 nos. 8 transducer protection cover fabrication 200 nos. 9 loco body repair at various locations 100 nos. 10 conservator shifting bracket support patti fabrication 200 nos. 11 sander box cover fabrication 200 nos. 12 loco cattle guard support patti fabrication 400 nos. 13 mrb duct supporting patti fabrication 300 nos. 14 fire box supporting bracket fabrication 100 nos. 15 cbc handle supporting bracket fabrication 300 nos. 16 various stiffeners fabrication 2000 nos. 17 checker plate fabrication repairing 100 nos. 18 test bench fabrication 20 nos. 19 fabrication of working table 20 nos. 20 day to day work of various section 700 nos. 21 gas cutting work 700 nos. ii tm section 1 bellow plate welding- one unit (one loco). during minor schedule of locomotives. 9600 nos. 2 ms net (jally) welding + temp sensor 6 block+ miss. work- one unit (one loco) during minor schedule of locomotives. 9600 nos. 3 bellow plate welding ms net (jally) welding & broken bolt removal. (one unit for 1 tm) 1800 nos. 4 removal of labyrinth by gas+ scrapping of condemn material +misc. wok on shop floor. (one unit for 3 tm) 1800 nos. iii pn section 1 provision of bp/fp protection cage involving cutting & removal of old or damaged protection cage by welding or gas cutting & provision of new cage of each cab. 300 nos. 2 reconditioning of damaged pipe lines of bp/fp/mr/db of each cab involved cutting of old damage pipe & provision of new pipes by welding, qty-01 no. (anyone) 400 nos. 3 provision of clamp bracket s involving old clamps bracket/ foundation removal & provision of new clamp s bracket / foundation at individual location.- qty-01 no.( anyone) 1000 nos. 4 ico activities involving one loco 100 nos. i) welding & cutting work involved in shifting/relocating of pn equipments. ii) cutting of brake fulcrum bracket edge of each bogie. iii) provision of bogie frame centre clamp bracket of each bogie. iv) other clamp bracket welding work. 5 bp, fp, mr & db hose rest plate welding rest plate 01no. (anyone) 400 nos. 6 brazing/ annealing of copper pipe. single pipe- 40 nos. 7 miscellaneous welding work involving welding of nipples/thread piece & dummy. qty-01 no. ( anyone) 200 nos. iv aoh section 1 dead weight stopper cutting & welding work. 250 loco 2 sctm duct modification work in new ic0 loco involving cutting & welding work & misc. work in same loco. 100 loco 3 misc. work like hood clamp, duct clamp, earthing clamp welding & misc. work in u/schedule loco. 500 loco v miscellaneous welding activity of 30 minutes 2000 nos. total b schedule 2- material component i various accessories for welding / cutting 1 apron nos. 8 2 hand gloves set 32 3 welding holders (esab/ metal arc make) nos. 14 4 industrial shoes. (bata or emperor make) set 8 5 helmet (prima / esab make) nos. 4 6 pant & shirt set 16 7 name badges nos. 4 8 chipping hammer nos. 8 9 wire brush nos. 16 10 cutogen sets (esab / sharp cut make) nos. 2 11 welding shield nos. 8 12 goggles. nos. 4.

Central Government/Public Sector

CTN :40366333

09 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For procurement, supply, and installation of 4 seater steel bench with back rest : stainless steel 304 grade mat finished , stainless steel sheet/plate shall be of 1.6 mm thick, round pipe shall be of 50/40 mm dia and 2 mm thickness, square pipe shall be size 40 mm x 40 mm and 2 mm thickness , base plate s hall be 8 mm thick , and fastener shall be of size 8 mm x 100 mm ,the punching / perforation in seating pla te and back rest shall be done by turret punching machine as per approved sample for punching. all fabrica tion work shall be done on roller machine by cnc laser cutting and argon welding . the argon welding shall be done by tig (tungsten inert gas). arc welding method as per is- 9604 . joint shall be weld under control led condition to avoide formation of crack and metal flow at welding point by using tungsten electrodes as per is-13907 and ss304 grade filler material . welds should be treated with k-2 solution . all the joints shall be finished and polished using automatic polishing machine to match with parent material . bench details : length -1750mm , width -450 mm , clear height -450 mm , base plate to be fixed on ground : 355mm x 17 5 mm x 8 mm , connecting leg : 355 mm x 40 mm . back rest details : length -1750mm , width -300mm , seat and back rest connecting pipe shall be of 40 mm dia and 2 mm thickness , clear height of bench with back rest 890mm,weight approx. 44 kg . warranty - as per irs condition. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40343928

06 Jun, 2025 5.09 Lacs

Jodhpur - Rajasthan

Tender For tender for supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.63mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.80mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 1.00mm thick gss sheet etc complete as required. , sitc of gi volume control damper complete with neoprene rubber gaskets , nuts , bolts , screws linkages , flanges etc. as per specifications etc complete as reqd.. , supplying & fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required. , sitc of 4x16 sqmm pvc insulated pvc sheathed aluminum conductor armoured cable on the existing ms tray /walls with saddles/pvc of cables with glands etc. as required , sitc of 3x2.5 sqmm pvc insulated pvc sheathed copper conductor armoured cable for control wiring on the existing ms tray / walls with saddles/pvc thread/cable tie , screws etc. i/c end termination of cables with glands etc as required. , sitc of 40mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 20mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 100mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating i/c horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc of 150mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating , horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc 25mmx5mm thick g.i. strip for loop earthing on cable tray wall etc complete as required , dismantling & removing the existing laid old power/control cables of booster fans , old package units , condenser units , heaters/pre-heaters system , humidification etc. complete by unscrewing/cutting from the related m.s. racks/tray as required , lowering down the same from different floor to ground floor & shifting the same to the place inside the exchange premises as directed by eng.-in-charge. , dismantling / removing the existing fitted old defective/working/ /worn out 05 nos.package a.c. units with related condensers & accessories like canvas connection , duct damper & place at out side ac plant room at same floor etc as directed by eng.-in-charge. , recovering the existing laid refrigerant piping of old defective/working / worn out hot gas & cold gas of different sizes complete by cutting/unscrewing /opening etc. fitted in between the package unit & condenser unit lowering down the same from different floor to ground floor and shifting the same to the place inside the exchange premises/keeping in safe custody as directed by eng.-in-charge. , dismantling the existing old ducts of pac

Central Government/Public Sector

CTN :40328992

20 May, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of liquid petroleum gas (industrial use) for metal cutting in 19kg pack each cylinder [ warrant y period: 30 months after the date of delivery ]

Gas Compressed Argon Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors