Latest gas fittings Tenders | Government gas fittings Tenders

State Government

CTN :41037996

16 Jul, 2025 36.0 Thousand

Kargil - Jammu And Kashmir

Tender For stabilization of existing supply line by way of providing laying and fitting of pipes at blocked/ damaged at various spots of water supply scheme poyen ( under capex).

CTN :41027585

19 Jul, 2025 NA

Kamrup - Assam

Tender For supply of bathroom water shower (v2),bathroom water shower (v2),bathroom water shower (v2),waste pipe,taps or valves of nonferrous metals,waste fittings for washbasin and sinks as per is 2963,ptmt tap fitting,ptmt tap fitting,plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest),plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest),connection pipe with nuts (v2),steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings),commercial cpvc pipe fittings,cast copper alloy screw down bib taps and stop valves for water services as per is 781,chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778,sinks / wash basins - vitreous china as per is 2556 (part 4),wire nails,soap dish - case,bathroom or toilet mirror (v2),chequered plywood for bus body building parts as per is 3513 (latest),taps or valves of nonferrous metals,taps or valves of nonferrous metals,cast copper

CTN :41015217

15 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For sanitary and other miscellaneous items in m1 block at canal colony cantt road, lucknow.(lot no.02) - providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is:13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :kitchen sink with drain board 510x1040 mm bowl depth 225 mm, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931:15 mm nominal bore, providing and fixing c.p. brass stop cock (consealed) of standard design and of approved make confirming to is:8931:15 mm nominal bore, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge.external work 100 mm nominal outer dia pipe., p/f wash basin with c.i. brackets,15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern,including painting of fittings andd brackets,cutting and making good the walls whenever required:white viterous china wash basin 630 450 mm with a pair of 15 mm brass pillar taps, p/f pvc low level flushing cistern with manually controlled device (handle lever) conforming to is:7231, with all fittings and fixtures complete.10 liter capacity-white, providing & fixing viterous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c. pan) with seat & lid fixed with c.p. brass hinges and rubber buffers,10 liter low level flushing cistern with fitting and brackets,40 mm flush bend,20 mm over flow pipe,with special of standard make & mosquito proof coupling of approved municipal design complete including painting of fittings and brackets,cutting and making good the walls and floors whereever required:white viterous china dual purpose wc pan white solid plastic seat and lid with white viterous china flushing cistern and c.p. flush bend., providing and fixing 600 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., providing and placing on terrace (at all floor levels) polythene water storage tank, is:12701 marked with cover and suitable locking arrangements and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support tank.500 liter., providing and placing on terrace (at all floor levels) polythene water storage tank, is:12701 marked with cover and suitable locking arrangements and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support tank.1000 liter

CTN :41015610

15 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For sanitary and other miscellaneous items in t-1 block at canal colony cantt road, lucknow.(lot no.22) - providing and placing on terrace (at all floor levels) polythene water storage tank, is:12701 marked with cover and suitable locking arrangements and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support tank.1000 liter capacity, providing and placing on terrace (at all floor levels) polythene water storage tank, is:12701 marked with cover and suitable locking arrangements and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support tank.500 liter capacity., providing & fixing viterous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c. pan) with seat & lid fixed with c.p. brass hinges and rubber buffers,10 liter low level flushing cistern with fitting and brackets,40 mm flush bend,20 mm over flow pipe,with special of standard make & mosquito proof coupling of approved municipal design complete including painting of fittings and brackets,cutting and making good the walls and floors whereever required:white viterous china dual purpose wc pan white solid plastic seat and lid with white viterous china flushing cistern and c.p. flush bend., providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is:13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :kitchen sink with drain board 510x1040 mm bowl depth 225 mm, providing & fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.(a) 15mm nominal bore, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931:15 mm nominal bore, providing and fixing c.p. brass stop cock (consealed) of standard design and of approved make confirming to is:8931:15 mm nominal bore, p/f wash basin with c.i. brackets,15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern,including painting of fittings andd brackets,cutting and making good the walls whenever required:white viterous china wash basin 630 450 mm with a pair of 15 mm brass pillar taps, p/f pvc low level flushing cistern with manually controlled device (handle lever) conforming to is:7231, with all fittings and fixtures complete.10 liter capacity-white, providing & fixing viterous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c. pan) with seat & lid fixed with c.p. brass hinges and rubber buffers,10 liter low level flushing cistern with fitting and brackets,40 mm flush bend,20 mm over flow pipe,with special of standard make & mosquito proof coupling of approved municipal design complete including painting of fittings and brackets,cutting and making good the walls and floors whereever required:white viterous china dual purpose wc pan white solid plastic seat and lid with white viterous china flushing cistern and c.p. flush bend., providing and fixing 600 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete.

State Government

CTN :40572200

22 Jul, 2025 9.77 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of industrial grey cpvc pipes confirming to standard astm-f-441 and cpvc fitting confirming to standard astm-f-439 for socket end for etp plant and tg-bop area of unit no. 10 and 11, ph-iv, stps, mppgcl, sarni.

Central Government/Public Sector

CTN :40854498

14 Jul, 2025 NA

Goa - Goa

Tender For corrigendum : supply of pipes, fitting, clamps, flanges, gaskets, fasteners etc. for fw cooling system , pipes, fitting, clamps, flanges, gaskets, fasteners etc. for exhaust system , pipes, fitting, clamps, flanges, gaskets, fasteners etc. for greasing system

Central Government/Public Sector

CTN :41018653

16 Jul, 2025 NA

Multi City - Multi State

Tender For supply of iron cot with mosquito net frame (as per the drawing enclosed in documents), 1. tubular pip e frame 1, 1/4 inch for leg-16 swg, 2. ms single sheet for cot-14 swg, folded at 4 equal sides. size:75 x 36 x 3 inches, 3.brackets welded for 04 sides, for bolt & nut fittings, 4. tubular pipes of 1 inch for supporting, 5 . rubber bushes 1 inch, for bottom security, 6. 5/8 inch tubular pipe for mosquito net supporting stand, 7. 5 /8 tubular pipe for mosquito stand top fitting. note: all the metal body to be coated with primary and then powder coated, 30 months warranty from date of delivery. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41008472

18 Jul, 2025 NA

Delhi - Delhi

Tender For auction sale of old, used, waste & scrap, conveyor belt,old, used, waste & scrap, be pump spares,old, used, waste & scrap, bearing,old, used, waste & scrap, bolt n nut,old, used, waste & scrap, civil and safety,old, used, waste & scrap, civil pipes & fitting,old, used, waste & scrap, cummins spare,old, used, waste & scrap, compressor 12 k.g.,old, used, waste & scrap, coupling & rubber bush,old, used, waste & scrap, cpt compressor,old, used, waste & scrap, dg, road roller, rope way,old, used, waste & scrap, dozer 120,old, used, waste & scrap, dozer,old, used, waste & scrap, dumper spare,old, used, waste & scrap, electrical,old, used, waste & scrap, electrical items (24),old, used, waste & scrap, electrical wires & lugs,old, used, waste & scrap, fire bricks,old, used, waste & scrap, mechanical,old, used, waste & scrap, mechanical spare,old, used, waste & scrap, tata hitachi,old, used, waste & scrap, tata shovel,old, used, waste & scrap, motor garage,old, used, waste & scrap, psl,old, used, waste & scrap, tools & tackels,old, used, waste & scrap, vehicle spare parts,old, used, waste & scrap, pc 220,old, used, waste & scrap, instrumentation,old, used, waste & scrap, tyre tube & compressor,old, used, waste & scrap, rock drill spare,old, used, waste & scrap, instruments (psl 17),old, used, waste & scrap, lab chemical,old, used, waste & scrap, prod & civ 5310 to 4830

CTN :40954948

15 Jul, 2025 3.77 Lacs

Bardhaman - West Bengal

Tender For diversion of industrial water spray line at lhcm 1 by transportation and fitting of 4 dia ms pipes at lhcm 1 spray pipeline in r viia seam of 3n4 incline j p colly

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

Gas Fittings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others