Latest gas holder repair Tenders | Government gas holder repair Tenders

Central Government/Public Sector

CTN :41055247

23 Jul, 2025 35.48 Lacs

Faizabad - Uttar Pradesh

Tender For tender for supply of street light at mvi airport ayodhya dham - supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes copper conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & insta

Central Government And Public Sector

CTN :41043865

31 Jul, 2025 NA

Kolasib - Mizoram

Tender For supply erection commissioning and testing of 20m high mast at thps including civil works d d - design manufacture supplying testing and commissioning of 20m high mast system with its accessories , supply of 300w led flood light made up of pressure die cast aluminum housing with toughened glass and high powered leds , supplying and erection of control panel or feeder pillar , supply and erection of twin 100w led dom aviation obstruction lights , design and construction of rcc civil foundation for the high mast , erection of the high mast with the help of suitable equipment and wiring of luminaries with materials and labour , gi pipe earthing for high mast with 3 m long 50 mm dia and 4mm thickness gi pipe including accessorie , providing service connection with 4 core aluminium 25 sq.mm 1.1kv armoured ug cable including supply layingtrenching and termination , providing 4c x 2.5 sq. mm copper conductor armoured cable 1.1kv for motor including supply laying trenching and termination as per specification , providing one 1 set of t and p for the operation maintenance practices of the masts and the raising and lowering arrangement , delivery up to site including packing and forwarding charges freight and insurance ) /bid number : gem/2025/b/6441974 * /dated: 11-07-2025 & & / bid document 1 / 19

CTN :40755579

16 Jul, 2025 NA

Nainital - Uttarakhand

Tender For supply of plug and socket distribution board (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , miniature circuit breakers distribution boards as per is 13032 (q3) , pressure sensitive adhesive plasticized pvc tapes with nonthermosetting adhesive as per is 7809 (part 3 / section 1) (q3) , fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984 (q3) , compression cable lugs (q3) , aviation light 10 to 25 w , sensor based led tube light fitting 20w ft batten type , led recess mounting fitting 2 feet x 2 feet 36w , led pl l 18w 4 pin 2 feet x 2 feet , led driver for 2 feet x 2 feet false ceiling light fitting , led recess mounting fitting 2 feet x 2 feet 36w warm white , sluice valve 80 mm pn 1 point 6 , sluice valve 150 mm pn 1 point 6 , sluice valve 200mm pn 1 point 6 , heating element 1500 watt triangular type , non return valve 100mm , non return valve 150mm , non return valve 200mm , cable jointing kit for 11 kv earthed grade heat shrink type joint complete with jointing materials indoor 3 c x 95 sqmm 11 kv e , heating element 2000 watt triangular type , ht jointing kit straight through 3 core x 95 sqmm outdoor , cable pvc twin core al 2 point 5 sqmm , sluice valve 100mm pn 1 point 6 , gate valve 25mm gm , ht cable end box indoor 3 c x 95 sqmm 11 kv e , thermostat for geyser 25 ltr , ht tape , led down lighter 12w , regulator electronic for ceiling fan modular type , fan regulator electronic double module type , led electronic driver 100 w , pvc casing caping 15mm x 10 feet , modular socket with mcb sp 25a , call bell buzzer type 230 volt , thermostat for geyser 50 ltr , pvc casing caping 25mm x 10 feet , led electronic driver 150 w , metal plug top 15a 3 pin , led electronic driver 45 w , modular switch 15 amps , holder angular pvc oblique bkl , tube light 20 watt three ) /bid number : gem/2025/b/6309313 * /dated: 18-06-2025 & & / bid document 1 / 106 colour , led electronic driver 72 w , pvc casing caping 37mm x 10 feet , holder batten pvc oblique bkl , holder pendent , led down lighter 6w , bed side led light 3 w , plug top 5 amps 3 pin , modular socket 15 amps , pvc laminated hylem sheet of size 10 inch x 8 inch , pvc laminated hylem sheet of size 8 inch x 5 inch , pvc laminated hylem sheet of size 5 inch x 5 inch , modular switch 5 amps , modular socket 5 amps , pvc laminated hylem sheet of size 4 inch x 4 inch , lugs aluminium 6 sqmm , pump starter 25 hp automatic star delta starter , pump starter 30 hp automatic star delta starter , bleaching powder , submursible cu cable 16 sqmm x 3 core , submersible cable copper conductor flat type 25 sqmm 3 core , submersible cable copper conductor flat type 6 sqmm 3 core , change over switch 100 amp 4 pole , change over switch 200 amp 4 pole , change over switch 63 amp 4 pole , ceiling rose , flame proof oblique weather proof rotary switch with cable termination box in lm6 16a single pole on oblique off , flame proof light fittting led light fitting 1x16 watt ip 65 with die cast alumimum housing with led tube light fixtures driver holders connector etc , exhaust fan 300 mm made of sturdy engineering plastic complete with louvers shutter voltage 230 v 50 hz rpm 1200 copper winding of sweep 300 m , exhaust fan 450 mm made of sturdy engineering plastic complete with louvers shutter voltage 230 v 50 hz rpm 1200 copper winding of sweep 450 m , cable pvc 10 sqmm alum twin core sheathed , industrial socket 2p plus e , industrial socket 3p plus n plus e 63 amp , flame proof oblique weather proof mcb socket and plug combined 32a 240v 2p plus earth , flame proof oblique weather proof mcb socket and plug combined 63a 440v 3p plus earth

CTN :41003354

29 Jul, 2025 NA

Khorda - Odisha

Tender For supply of pressure die castings 12 types d d - 7510120900 pressure die casting cover t 01 dc 8040554 209 m3 , 7510125300 die casting body dc 253 m2 t 01 dc 8020283 1 253 m2 , 7510125801 pressure die castinng sector t 01 dc 8483038 258 m2 , 7510126000 die casting flange t 01 dc 8232038 260 m1 , 7510126700 cover casting t 01 dc 8040615 267 , 7510128100 die casting cover t 01 dc 8040568 281 m1 , 7510128300 pressure die casting cover t 01 dc 8040085 283 m2 , 9927068625 housing t 01 dc 8212548 219 m1 , 9927068870 die casting cover t 01 dc 8040287 233 m2 , 9927095679 die casting bracket t 01 dc 8080110 287 , 9927095682 die casting bracket t 01 dc 8080118 289 m2 , 9927096065 diecasting cover t 01 dc 8040570 269

CTN :40996146

23 Jul, 2025 NA

Multi City - Multi State

Tender For supply of lithium -ion rechargeable battery operated 30-watt cob type led multipurpose l ocomotives work light having impact resistance construction, corrosion resistance alumi nium die cast housing with shock and vibration proof rubberised edge, powder coated finis h body, swivelling mounting bracket, removeable magnetic base. specification - wattage: 30- watt, light output 2800 lumen, ip 54 rated, lithium ion battery 4400 mah. make: groz or makit a or sanlinkee or similar. [ warranty period: 12 months after the date of delivery ]

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40931929

18 Jul, 2025 NA

West Singhbhum - Jharkhand

Tender For supply of indoor type 18w led tube light fitting complete nos. luminaire with surface/ wall m ounted led batten with high pressure die-cast aluminum with adc 12 alloy housing or crca sheet (0.6 mm thick) powder coated to white colour suitable for 140-270v, cri 280, pf >= 0.90 at full load, colour temper ature 6000+500 k, working temperature -10 degree c to 50 degree c, luminaire efficacy>= 110 im/w, ip 2 0, surge protection- mov of 2.5 kv (on board), burning hours 2 50000 with all accessories with suitable arr angement for fixng on wall with all the accessories. the luminaire shall conform to is 10322-5-1 (2012) wit h latest amendment if any. driver type - constant current driver with short circuit & open circuit protection. the firm has to submit technical parameters as per annexure a of specification no. pcee/s/185/led/12/21/ rev-0, dec-2021. the complete luminaire shall have replacement guarantee for satisfactory performance a nd manufacturing defects for a period of 60 months from date of commissioning or 72 months from date of supply whichever is earlier. led based luminaire shall be conforming to specification no. cee/s/185/led/12 /21/rev-0, dec-2021. make: philips, bajaj, orient, surya, havells, crompton, syska, goldwyn. [ warranty p eriod: 72 months after the date of delivery ]

CTN :39038241

18 Jul, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

State Government

CTN :40897481

21 Jul, 2025 NA

Amravati - Maharashtra

Tender For supply of various types of electrical materials - insulation tape roll (6 meter), steelgrip, nippon, anchor, supplying miniature circuit breaker of single pole breaker (confirming to is:8828) of 32 a c series) (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying miniature circuit breaker of single pole breaker (confirming to is:8828) of 32 a b series) (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying of four pole isolators / only switch version of miniature circuit breaker of 63 amps. (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying electronic ding dong type call bell with heavy duty coil suitable to operate on 230 v a.c. & d.c. (note:- make with the lowest rate will be approved), anchor, leader, c&s electric, havells, modular switch 6 amp 1 module (for existing maintenance replacement), anchor rider, anchor penta, modular plug 5 pin 6 amp (for existing maintenance replacement), anchor rider, anchor penta, modular switch 16 amp 1 module (for existing maintenance replacement), anchor rider, anchor penta, modular plug 6 pin 16 amp (for existing maintenance replacement), anchor rider, anchor penta, compact led 18w tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated hf electronic driver complete. (note:- make with the lowest rate will be approved), philips, bajaj, crompton, four pole mcb c 63 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, triple pole mcb c 32 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, double pole mcb c 32 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, four pole isolators 100 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, double pole isolators 40 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, industrial plug original 1.25 mm crca sheet metal enclosureswith 20a. 2 pin plug & earth socket and 20a. 3 pin plug top with20a/30a single pole mcb complete erected on angle iron/ g.i. frame (note:- make with the lowest rate will be approved), havells, datar, legrand, copper cable 2 core wire 0.5 sqmm 90 meter (note:- make with the lowest rate will be approved), finolex, rr kabel, polycab, square led panel light 18 to 20 w. (slim edge-lit) provision for plain front frame with translucent cover fix to the housing complete. (note:- make with the lowest rate will be approved), philips, bajaj, crompton, led square / circular 9 to 12w down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete (note:- make with the lowest rate will be approved), philips, bajaj, crompton, led street light fitting suitable for above 40w to 48w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete (note:- make with the lowest rate will be approved), philips, bajaj, crompton, devalite, supplying ready to use retrofit t8 led 18 / 20 tube light with polycarbonate body, heat sink, integrated hf electronic driver complete & compatible to t8 / t12 led luminaire by disconnecting starter & ballast if necessary (for existing maintenance replacement), crompton, supplying decorative pre-wired box type fitting/batten suitable for 4 feet, t8 led tube light (excluding tube light). (for existing maintenance replacement), crompton, 3 pole mccb of 400a, 415v capacity with short circuit rating 36 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ uv/ trip alarm contact and mccb should have phase barriers both sides (note:- make with the lowest rate will be approved), datar,

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

Gas Holder Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government