Latest gas transmission system Tenders | Government gas transmission system Tenders

State Government

CTN :44986944

01 May, 2026 1.71 Lacs

Multi City - Telangana

Tender For laying of 100mm dia di water supply line by replacing 100mm dia di pipeline which causing pollution at ram reddy nagar , ward no.131 under chintal section, sd.i, oand m div.xii. (reserved for sc community as per go ms.no:59, dt:21.05.2018)

corporations/Associations/Others

CTN :44992830

15 May, 2026 6.51 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of deluge valve of ict and laying of fire hydrant lin c c - laying of ms pipe 100 mm of hydrant system including cutting, and welding etc. and commissioning the line at 6 to 8 kg per cm2 , laying of ms pipe 200 mm of hydrant system including cutting, and welding etc. and commissioning the line at 6 to 8 kg per cm2 , making of ms bend, tee, and reducer including cutting welding work of following size pipes 100 mm dia. , making of ms bend, tee, and reducer including cutting welding work of following size pipes 200 mm dia. , fixing of ms bend, tee, and reducer of following sizes pipe. 100 mm dia. , fixing of ms bend, tee, and reducer of following sizes pipe. 200 mm dia. , fixing of ms flange on the hydrant system, pipe line by cutting , welding and grinding etc. of following dia size. 100mm dia. , fixing of ms flange on the hydrant system pipe line by cutting, welding and grinding etc. of following dia size 200mm dia. , dismantling of ci gate valve of following sizes with the help of nuts and bolts 100 mm dia. , dismantling of ci gate valve of following sizes with the help of nuts and bolts 150mm dia. , fixing of ci gate valve of following sizes with the help of nuts and bolts. 100 mm dia. , fixing of ci gate valve of following sizes with the help of nuts and bolts. 150mm dia. , dismantling of ms,ci,gi pipe line from the hydrant system by loosening of nuts and bolts by cutting and transportation of following sizes. 200mm dia. , fabrication of hydrant valve post of ms pipe dia. 80mm one mtrs. long and welding with ms flange 80mm dia. it should be painted with red oxide and finally with red paint. , fixing of hydrant post of 80mm pipe line of hydrant system with the help of nut and bolts , dismantling of rcc,cc metallic road for taking out the damaged pipe for replacement of pipe and filling the same up to proper level of the earth. , earth work by excavation of ordinary,mixed soil,mixed with bujari, bolders etc. , painting of 200,150 and 100mm dia. , making and fixing of pipe stand for supporting and clamping 150mm dia ms pipe , unloading,shifting,stacking of materials supplied by suppliers and laying in store , replacement of 65,80,100,150 nb size deluge valve or alarm valve of fire fighting system

State Government

CTN :45000596

20 May, 2026 39.38 Lacs

Hyderabad - Telangana

Tender For painting of 38 nos ms towers of 220kv mamiidpally chandrayanguta and 220kv hial chandrayanagutta dc line from locno 24 to 61 invited under earmarked works individuals belonging to sc community are only eligible to participate

State Government

CTN :45000598

20 May, 2026 60.24 Lacs

Hyderabad - Telangana

Tender For painting of 90nos ms towers of 132kv chandrayanagutta-jubilee hills dc line from locno 1 to 69, 71 to 84 and 87 to 93 invited under earmarked works individuals belonging to st community are only eligible to participate

Central Government/Public Sector

CTN :44896216

29 Apr, 2026 1.91 Crore

Brajrajnagar - Odisha

Tender For corrigendum : supply of screw,,180lps,170m, part no.fm590bd2402104531032 , balance valve,180lps,170m head, part no.fm590bd2402104531033 , dowel pin bal valve cvr,180lps,170m, part no.fm590bd2402104531034 , imp. key,en-8, part no.fm590bd2302105062035 , shaft sleeve nde,bronze,3-stg,180lps, part no.fm590bd2302105062037 , sleeve nut nde,3- stg,180lps, part no.fm590bd2302105062038 , oil sight window assy.,steel and glass, part no.fm590bd2302105062043 , bearing bush de and nde,bronze,180lps, part no.fm590bd2302105062044 , dowel pin brg. cap brg. body,en-8 en-9, part no.fm590bd2302105062050 , gasket brg. cap brg. body,3-stg,180lps, part no.fm590bd2302105062051 , packing pcs. style no.3116,3-stg,180lps, part no.fm590bd2302105062052 , dowel pin,en-8 en- 9,180lps, part no.fm590bd2302105062053 , sleeve nut de,3-stg,180lps, part no.fm590bd2302105062059 , water slinger,rubber,3-stg, 180lps, part no.fm590bd2302105062060 , balancing water conn.line assy,ms,180lps, part no.fm590bd2302105062061 , water seal tube,flexible,3-stage,180lps, part no.fm590bd2302105062062 , cinch fitting,steel,180lps, part no.fm590bd2302105062063 , flexible coupling ,tyre, 3-stg, 120lps, part no.590bd201048036070 , bearing bust d.e and n.d.e, part no.fm590bd23021044910-44 , gasket for casing, part no.p5922a150622203036 , bush inter stage, cf-8, part no.p5922a170128437035 , collar inter stage, part no.p5922a170128437034 , stud bolt with nut casing to gland, part no.p5922a170128437028 , pump shaft, en8, part no.p5922a170128437026 , brg. housing bracket d.e., part no.p5922a170128437025 , water seal ring, part no.p5922a170128437021 , stuffing box bush, part no.p5922a170128437020 , shaft sleeve, bronze, part no.p5922a170128437019 , key for impeller, part no.p5922a170128437017 , cinch fitting, part no.p5922a170128437013 , water seal tube, part no.p5922a170128437012 , wearing ring casing, part no.p5922a170128437011 , sleeve nut n.d.e., part no.p5922a170128437009 , bearing cover d.e. and n.d.e., part no.p5922a170128437006 , shaft collar, part no.p5922a170128437005 , lock washer for bearing, part no.p5922a170128437003 , lock nut for bearing, part no.p5922a170128437002 , brg. housing bracket n.d.e., part no.p5922a170128437001 , rotating assembly for flowmore make pump, part no.rap5922284370 , stuffing box cover d.e. and n.d.e, part no.5922201048034049 , bearing cover n.d.e, part no.5922201048034006 , brg.housing bracket d.e, part no.5922201048034025 , bearing bracket housing n.d.e, part no.44 , bearing bracket housing d.e, part no.2 , pump shaft, part no.1 , cover for brg. hous d.e., part no.4 , coller inter stage, part no.8 , bush inter stage, part no.9 , shaft sleeve, part no.17 , cover for brg hous nde, part no.28 , wearing ring casing, part no.16 key (for pump half coup.) en-8, part no.fm590bd2302105062001, pump shaft 180lps,170m head, part no.fm590bd2402104531002, oil ring (de & nde),brass,3-stg,180lps, part no.fm590bd2302105062003, oil cap,rubber,3- stg,180lps, part no.fm590bd2302105062004, dust cover,aluminum,3-stg,180lps, part //bid details 2 / 60

State Government

CTN :44999412

08 May, 2026 NA

Mumbai - Maharashtra

Tender For tender for the bench-top triple quadrupole gc-ms/ms system with transfer line headspace sampler

CTN :44982393

04 May, 2026 NA

Sonitpur - Assam

Tender For supply of screw full thread 6x19 mm , pvc switch board snow white of size 7 inch x4 inch for socket and switches , pvc switch board snow white of size 8 inch x10 inch for main switch oblique db , pvc l bend and t junction joint for pvc casing and caping , switch socket combination snow white multipurpose 2 in 1 comma 15a comma 230v , switch socket combination snow white 5a comma 230v , service bracket 40mm dia gi tubing medium grade 1 point 5m long , service cable pvc insulated aluminium conductor comma 1100 volt grade heavy duty , led tuble light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings comma drilled with two nos holes for 6 mm dia near one side , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1 point 5m long , gi wire 4mm diameter , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronzesize 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , individual standalone plastic body smoke alarm with adequate provision for fixing on wall oblique ceiling oblique roof , individual standalone plastic body heat alarm with adequate provision for fixing on wall oblique ceiling oblique roof , fire ball extinguisher 1 point 3 kg with suitable provision for wall mounting and capable of self activating on contact with flames , double sleeping bunk dsb complete all as per technical specification along with foam cum coir matress , steel bed side locker of size 1000mm x 1520mm x 450mm complete all as per technical specification , study chair of size length 56 cm comma height 82 cm and width 56 cm comma lacquered finish with arm comma seat and back cushion comma velvet upholstery , study table of size 4 ft x 2 ft wooden top on round tube structure with three drawers unit , looking mirror of size of selected quality frameless of size 600 x 450 x 5 mm , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts oblique hour with storage compartment and auto shut off facility , portable indoor type high quality kero heater metal body ignites type of continues heating , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm //bid details 2 / 61 dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :44982395

04 May, 2026 NA

Sonitpur - Assam

Tender For supply of conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :44969592

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of electricla spares and supplies - 3.7 kw motor rewinding, 4-way jb installation with support — 400w light for planning &, store area, led lights 400w installation with support — planning & store, area and other locaiton as advised, 4c × 4 sq.mm cable laying — mcc to commercial shed, loading/unloading boom-a lcs, conveyor boom-a motor,, bypass conveyor boom-a motor, bypass conveyor boom-b, motor, conveyor boom-b motor and other locaiton as advised, 3c × 2.5 sq.mm cable laying — mcc to commercial shed:, conveyor boom-a lcs, bypass conveyor boom-a lcs, loading &, unloading boom-b lcs, conveyor boom-b lcs, bypass conveyor, boom-b lcs and other locaiton as advised, 75 × 50 mm cable tray angle & support — commercial shed, loading & unloading boom, 4c × 16 sq.mm al cable laying — storage shed du new motor, and other locaiton as advised, 4c × 1.5 sq.mm cable laying — filling shed du new lcs, mcc for, new purging unit, valve changing shed to mcc for new valve, changing machine lcs, dpt shed to mcc for new valve, changing machine lcs, 4c × 2.5 sq.mm cable laying — mcc to 24-head carousel, earthing relay, mcc room to 48-head carousel earthing , to 12-, head carousel earthing, 2c × 1.5 sq.mm cable laying — lpg pump house jb to lcs &, instrument for lpg pump, 12p × 1.5 sq.mm cable laying — lpg pump house jb to jb, instrument for lpg pump, 4c × 4 sq.mm cable laying — lpg pump house to mcc for lpg, pump lcs, 4c × 4 sq.mm cable laying — filling shed to mcc for conveyor, dus, earth pit installation — commercial shed (earth digging, gi pipe, fitting, chamber making, gi busbar, chequer plate frame &, chequer plate), earthing strip laying 50 × 6 mm — commercial shed earth pit to, 47.5 kg filling scale, platform structure — dismantle, filling shed near 24-head, carousel, weight scale unit stand & base frame fabrication & installation, — commercial shed, 4c × 16 sq.mm cable laying — valve changing shed to mcc for, new valve changing machine motor, dpt shed to mcc for new, valve changing machine motor, storage shed to mcc for new, du motor, lpg pump house telephone shifting & cable laying, cable tray 75 × 50 mm laying with angle support — commercial, shed, valve changing shed, storage shed, ms plate 1500 mm × 1500 mm × 6 mm modification &, installation — commercial shed hydraulic jack, lightning arrestor height extension for lps (tt gantry rooftop /, filling shed top), new lightning arrestor installation for lps (filling shed &, commercial shed top), earthing strip dismantling & shifting 50 × 6 mm for earthing grid, msv area / lpg pump house manifold & msv manifold /, planning room / storage shed), earthing strip installation 25 × 3 mm for pipe-end flange (receipt, station fencing — all areas / tt parking area fencing / pump, house manifold & msv manifold), hydrant monitor height extension — dismantling and, installation, pipe cutting and welding with flange (tt parking, area / commercial shed loading and unloading), hydrant monitor structure and platform with railing shifting,, fabrication and installation (tt parking area), hydrant monitor railing fabrication and installation (near, counting platform / near lpg pump house / msv area), gi fencing fabrication and installation (3 m × 2 m) — near, counting platform, earthing strip laying with clamp & fabrication 25 × 3 mm (lpg, pump house shed roof to bottom and other locaiton as advised), water pipe 1" line installation with fitting (commercial shed, composite cylinder area), ovcm vent pipe 1" line modification with flange joint (filling, shed), sprinkler pipe 2" line cleaning & modification with flange joint, (msv top area), commercial shed evacuation — vent pipe 1" line modification &, installation with flange joint, conveyor and gi pipe dismantling work — length 45 mtr., (commercial shed valve changing shed connecting platform), platform installation for valve opening of cylinder (filling shed), stand fabrication &

CTN :44856041

04 May, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : tender for supply of cast basalt bends and laterals for dry ash conveying line - cast basalt bend (id 253mm with 30 deg) , cast basalt bend (id 253mm with 90 deg) , ms equal y-piece ( lateral) lined withca , 60 deg cast basalt y-lateral(250x200 nb , cast basalt bend (id 253mm with 45 deg)

Gas Transmission System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

State Government