Latest gasket elbow Tenders | Government gasket elbow Tenders

Central Government/Public Sector

CTN :40434906

06 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For gasket elbow to accessory drive housing to emd part no.40039268. note:-gov. approved la b certificate must be submitted and one sample to be got approved before effecting bulk supply of material . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40438791

06 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For gasket elbow to accessory drive housing to emd part no.40039267. note:-gov. approved la b certificate must be submitted and one sample to be got approved before effecting bulk supply of material . [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :40561378

09 Jun, 2025 NA

Sitapur - Uttar Pradesh

Tender For competative e-bidding for supply of hardware miscellaneous material for season 2025-26 - m.s. plain washer to 11/2 , wire nail to 4 , split pin n.f. x 2 , split pin n.f. x 2 1/2 , split pin n.f. 3/16"x2", split pin n.f. 3/16"x1 1/2", nyloc nut accurate make 1/2", nyloc nut accurate make 3/4", nyloc nut accurate make 5/8", nyloc nut accurate make 7/8", nyloc nut accurate make 1" & 25mm, nyloc nut accurate make 22mm, m.s. rivit tata make 3/8 x 2 , s.s. wire 16 gauge, rubber joint 1/8 , rubber joint 1/16 , synthetic rubber sheet , rubber hose pipe dunlop make , rubber hose pipe dunlop make 3/4 , rubber hose pipe dunlop make 1 , emery cloth carbonrandum make (rough), emery cloth carbonrandum make (fine), emery cloth carbonrandum make (medium), emery tape carborandum make 2 (rough), emery tape carborandum make 2 (fine), emery tape carborandum make 2 (medium), teflon tape champion make , rustoline 500 ml, holdite yellow compound, shallock compound, m-seal (general purpose), araldite 180 gm pack, red lead dewaldi make, white lead shalimar/shakru make, cotton waste 1 grade white quality, cotton waste 1 grade colored quality, graphited powder 500 gm. pack, manila rope with test certificate 1 , manila rope with test certificate 3/4 , m.s. round to 3 dia, m.s. round 3 1/2 x 6", en-8 rod to 3 , en-8 rod 3 1/2 x 6", en-9 round 63mm, en-9 round 100 mm, m.s. steel wire rope x 6/19 with test certificate (usha martin make), steel wire rope x 6/19 hema core (usha martin make), u-clamp forged , u-clamp forged 5/8 , locktile 242 (thread locker), shight glass round toughned 200x15 mm, shight glass round toughned 120x12 mm, shight glass round toughned 100x12 mm, nylon sheet as per sample 230x410x20mm, c.i, plumber block s-520 (smr make), c.i, plumber block s-222 (smr make), c.i, plumber block s-528 (smr make), c.i, plumber block s-517 (smr make), c.i, plumber block s-519 (smr make), c.i, plumber block s-515 (smr make), copper pipe 8 mm, copper pipe 10 mm, coir rope , aluminium rivit , bearing retainer (locktite) 262 no 50mm, industrial therma meter with red indicator, canvas belt 4 x6 ply, canvas belt 6 x8 ply, grinding paste rough & fine carborendum 400gm, grinding paste rough & fine carborendum 100gm, c.i. cock 1 heavy duty, c.i. cock 3/4 heavy duty, c.i. cock 1/2 heavy duty, steel wire rope 19mm dia 6x36 construction hemp core (ush martin with t.c.), spring washer 5/16 square section ssss, spring washer 3/8 square section ssss, boiler gauge glass sleeve , boiler gauge glass klinger make h-7, neoprine rubber cone for gauge glass, neoprine rubber ring for gauge glass, spring washer 1 4bbbb, boiler gauge glass for x161/2 , wire braded flexible rubber hose pipe x1.5 mtr with both end nut (bsp), d-cycle , m.s. steam pipe for steam line & pressure about 300ii/aq.mm size , steamtrap valve 1/2", 3/4". 1", union socket complete (brass), ferrule (lubricated), lubricated copper pipe , lubricated complete (8 plunger), taflon tube 10mm o.d., m.s. counter shanok bolt 5/8 x2 , taflon rod 300 psi 1 , flat head nickled m/c screw 4 x 40 mm, flat head nickled m/c sorew 6 x 65 mm, flat head nickled m/c sorew 6 x 15 mm, gear coupling boss dia 185 flanged outer dia 220mm, reduction gear cooling fan as per sample, high carbon steel for boiler 3 x50 , nickle bolt double nut 12 x 60, nickle bolt double nut 12 x 40, nickle bolt double nut 10 x 40, s.s. nozzel with socket as per sample for c/f machine., brass nozzle as per sample, pressure gauge 6 dia bottom entry 0-151 bs, pressure gauge 6 dia bottom entry 0-60 bs, pressure gauge 6 dia bottom entry 0-150 bs, pressure gauge 6 dia bottom entry 0-300 bs, pressure gauge 6 dia back side entry 0-30 kg, pressure gauge 6 dia back side entry 0-15 kg, pressure gauge 6 dia back side entry 0-10 kg, pressure gauge 12 dial bottom entry 0-201 bs, counter 8 digt 12 x 4 , vaccuume gauge 6 dia bottom entry 0-30 bs, temp. gauge 6 dia stem type 0-200 c, digital temp. indicator 0-1000 c, thermo couple for 0-1000 c 12 long 2mm

CTN :40534248

18 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn

CTN :40507854

18 Jun, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of relay assy , alternator belt , ac belt , gasket elbow to bypass pipe , shaft seal , repair kit consists , tensioner comp timing belt , reservoir , head lamp assy , clamp hose , repair kit for piston ring

Central Government/Public Sector

CTN :40344469

03 Jun, 2025 NA

Durg - Chhattisgarh

Tender For corrigendum : procurement of gasket and rubber kit - a gasket water inlet to block , b gasket pump support to block , c gasket valve lever casing to cyl head , d dresser coupling gasket2 point 1by2 , e o ring for fuel pumping , f o ring expressor lube oil pump , g gasket water jumper pipe bottom , h armoured gasket without steel , i armoured gasket , j a9 rubber valve rubber kit , k sa9 independent brake valve rubber kit , l c2 relay valve rubber kit , m gasket for cylinder liner , n dressor gasket 2 , o armoured gasket 2point5 , p gormet for fip supporty cover , q gasket tappet cover casing valve lever , r gasket water pipe to water collector , s gasket phasing plate , t gasket fuel primary and secondary , u gasket lube oil strainer cover , v gasket lube oil strainer cover , w water jumper top gasket , x rubber roller , y gormet push rod sleeve , z gasket base cover to genrator end , aa seal o ring , ab gasket pipe to pump and lube oil cooler , ac gasket regulatingvalve to base , ad gasket body to spring housing , ae gasket pipe to strainer , af gasket cover to housing , ag gasket pump to plate and base , ah gasket shim to housing and cyl head , ai gasket , aj gasket support to base left side , ak gasket support to base right side , al gasket coupling , am gasket valve to pipe , an gasket at pipe and below connectors , ao gasket fan drive to support , ap gasket fitting to fan drive , aq gasket elbow to after cooler , ar gasket air elbow turbo , as gasket housing to support , at gasket cylinder block to turbo support , au gasket cylinder block to gear casing free end lower , av gasket armoured , aw gasket armoured , ax gasket armoured , ay gasket water connector , az gasket fuel oil pump face plate , aaa gasket flex coupling 3 , aab victaulic gasket 3 , aac gasket for bearing housing tacho gen

Central Government And Public Sector

CTN :40363299

06 Jun, 2025 NA

Angul - Odisha

Tender For supply of o rings and gaskets for locomotives maintenance - gasket elbow to head , gasket elbow to block , o ring for nozzle holder , gasket branch pipe to cyl head , gasket manifold to cyl hd , gasket at pipes below connectors , gasketinlet to header , gasket l o filter ptno11270287 , o ring split flangeptno11328228

Central Government And Public Sector

CTN :40343928

06 Jun, 2025 5.09 Lacs

Jodhpur - Rajasthan

Tender For tender for supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.63mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.80mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 1.00mm thick gss sheet etc complete as required. , sitc of gi volume control damper complete with neoprene rubber gaskets , nuts , bolts , screws linkages , flanges etc. as per specifications etc complete as reqd.. , supplying & fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required. , sitc of 4x16 sqmm pvc insulated pvc sheathed aluminum conductor armoured cable on the existing ms tray /walls with saddles/pvc of cables with glands etc. as required , sitc of 3x2.5 sqmm pvc insulated pvc sheathed copper conductor armoured cable for control wiring on the existing ms tray / walls with saddles/pvc thread/cable tie , screws etc. i/c end termination of cables with glands etc as required. , sitc of 40mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 20mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 100mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating i/c horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc of 150mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating , horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc 25mmx5mm thick g.i. strip for loop earthing on cable tray wall etc complete as required , dismantling & removing the existing laid old power/control cables of booster fans , old package units , condenser units , heaters/pre-heaters system , humidification etc. complete by unscrewing/cutting from the related m.s. racks/tray as required , lowering down the same from different floor to ground floor & shifting the same to the place inside the exchange premises as directed by eng.-in-charge. , dismantling / removing the existing fitted old defective/working/ /worn out 05 nos.package a.c. units with related condensers & accessories like canvas connection , duct damper & place at out side ac plant room at same floor etc as directed by eng.-in-charge. , recovering the existing laid refrigerant piping of old defective/working / worn out hot gas & cold gas of different sizes complete by cutting/unscrewing /opening etc. fitted in between the package unit & condenser unit lowering down the same from different floor to ground floor and shifting the same to the place inside the exchange premises/keeping in safe custody as directed by eng.-in-charge. , dismantling the existing old ducts of pac

Central Government/Public Sector

CTN :40292700

02 Jun, 2025 NA

Pune - Maharashtra

Tender For gasket elbow to accessory drive housing to dlw pt no.16170957 as per drg.no. emd pt no.40039267. test certificate provide with supply. [ warranty period: 30 months after the date of de livery ]

Gasket Elbow Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector