Latest gauges Tenders | Government gauges Tenders

CTN :42122185

06 Nov, 2025 NA

Bathinda - Punjab

Tender For supply of xylometazoline hcl 0 point05 w v nasal solution pa - single plate clutch , multi plate clutch unit , centrifugal cluth unit , cutsection of synchromesh gear box , complete propeller shaft , cutsection of differential assembly , model of hydraulic brake system , ackerman steering gear mechanism , davison steering gear mechanism , model of rack and pinion steering gear , model of power steering gear or recirculating type worm and wheel , model of ac pump , model of su pump , lead acid battery , wheel balancing machine , automobile electric system , brake master cylinder , sliding mesh gear box , cut section model of 4 cylinder 4 stroke petrol engine , ac induction motor with vfd for motorizing already existing models in lab , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , venturimeter and orificemeter apparatus , pelton turbine model , francis turbine model , pressure measuring bench , hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , bench grinding machine , digital pyrometer , metallurgical microscope , polishing machine , heat treatement furnace or muffle surface , spark test apparatus , metallurgical cut off machine , standard prepared readymade samples or specimen with photographs , rockwell cum brinell hardness tester , simple jib crane apparatus , simply supported beam apparatus , worm and worm wheel apparatus or single start , winch crab single purchase apparatus , apparatus for determining centre of gravity of regular and irregular lamina , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-nogo snap gauge , go-nogo ring gauge , cylinder rollers and spherical balls , slip gauges set , surface roughness tester , vernier bevel protractor , magnetic v block , dial indicator with stand , cylindrical bore gauge , screw thread micrometer , sine bar , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator with stand , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch, lp or hp cut out, overload protector, filters , model of refrigeration cycle , model of window air conditioner , refrigeration cycle testing rig , digital anemometer , gas charging kit , model of open type refrigerant compressor , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , models of safety valve, blow off cock, steam stop valve, feed check valve , model of air compressor , model of lancashire boiler , model of nestler boiler , actual cut section model of 2 stroke single cylinder petrol engine , actual cut section model of four stroke single cylinder diesel engine , model of solex carburettor , model of amal carburettor , model of ignition system of an automobile , model of water cooling system of an automobile , model of lubrication system of i.c. engine , mpfi, four stroke three cylinder petrol engine test rig with electrical dynamometer , model of mpfi system , model of crdi system , impact //bid details 2 / 97 testing machine or charpy and izod , digital torsion testing machine //bid details 3 / 97

CTN :42122286

22 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the

Central Government/Public Sector

CTN :42129790

24 Oct, 2025 NA

Multi City - Multi State

Tender For supply of absolute pressure gauges 0-100 psi,absolute pressure gauges 0-100 psi,absolute pressure gauges 0-100 psi,absolute pressure gauges 0-100 psi,absolute pressure gauge 0-300 psi,absolute pressure gauge 0-300 psi,absolute pressure gauge 0-300 psi,absolute pressure gauge 0-300 psi,compound pressure gauge (-30) - (+ 90),compound pressure gauge (-30) - (+ 90),compound pressure gauge (-30) - (+ 90),compound pressure gauge (-30) - (+ 90),compound pressure gauge (-30) - (+ 270),compound pressure gauge (-30) - (+ 270),compound pressure gauge (-30) - (+ 270),compound pressure gauge (-30) - (+ 270)

Central Government/Public Sector

CTN :42133728

20 Oct, 2025 NA

Bokaro - Jharkhand

Tender For annual maintenance contract for ims messsysteme gmbh make gauges of hsm & crm3

Central Government/Public Sector

CTN :42126656

15 Oct, 2025 NA

Ahmedabad - Gujarat

Tender For supply of inspection gauges

Central Government / Public Sector

CTN :42126741

21 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of spares for slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5mm (in incremental of 0.1 mm), total of 21 nos, along with calibration certificate. thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gauge surfaces to be ground, sharp corner to be removed.

CTN :42127768

13 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of cbc gauges (c&w item)

CTN :42128221

06 Oct, 2025 NA

Patiala - Punjab

Tender For supply of 05 types of master cylindrical mandrel for zero setting of snap gauges

CTN :42090665

06 Oct, 2025 NA

Patiala - Punjab

Tender For corrigendum : supply of master cylindrical mandrel for zero setting of snap gauges as per drg no. g-0573 gauge c for 6fra 6068 tm dia 184+/-0.005 (without stand) . [ warranty period: 30 months after the date of delivery ]