Latest gear pinion Tenders | Government gear pinion Tenders

Central Government/Public Sector

CTN :40599470

16 Jun, 2025 48.5 Thousand

Dhanbad - Jharkhand

Tender For repairing of swing circle gear pinion teeth and overhauling of radiator and fitment of transmission oil cooling line inlet outlet hose of motor grader bg825 at adic kusunda area

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

CTN :40582189

24 Jun, 2025 NA

Amritsar - Punjab

Tender For supply of speedo sensor , drive gear pinion , speedometer , armature , field coil assy , crossed disc , clutch master cyl assy , slave cyl assy , relay turn signal

CTN :40590427

12 Jun, 2025 NA

Doiwala - Uttarakhand

Tender For supply of cs casting (trash plate, hubs, gears, pinion, couplings, bearing housing for mill etc)

CTN :40005003

03 Jun, 2025 NA

Kolar - Karnataka

Tender For corrigendum : supply of 125tm52698-ring gear forging

CTN :40538071

20 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of hub gear fan drive (forging) as per drg.no. ske no-0135 alt e specn: d 93300 [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :40550630

06 Jun, 2025 2.00 Lacs

Bareilly - Uttar Pradesh

Tender For supply/conversion basis of transmission gear pinion for season 2025-26

CTN :40503233

13 Jun, 2025 NA

Doiwala - Uttarakhand

Tender For supply of mill and power turbine spares - 14a sh. no.020 o/p 2500 kw, rotor shaft fitted with moving blades, 1st stage nozzles with locking pieces, 2nd stage and 3rd stage diaphrogm, main shaft thrust coller, hp side laby segments, lp side laby segments, steam laby spring, oil seal holder hp & lp side, oil seal laby spring, rotor front and main bearing (76 mm journal), rotor rear and main bearing (76 mm journal), horizontal faceing stud, ht nut (horizontal face), oil seal bearing (68 mm journal), oil intel fitting, front end thurst bearing, active thurst pad, non active thurst pad holder, active thurst pad holder, non active thurst pad holder, oil seal laby segment hp& lp, oil intel fittings, front end bearing bkt horizontal stud, ht nut 1/2 " bsf, ht nut 3/8" bsf, governor drive shaft, governor drive wheel, governor wt, governor wt carrier, governor wt, governor race carrier, ball bearing b7205, fulcrum pin with washar & split pin, needle bearing 1816, ball bearing -u109/ 629zz, spindle for race carrier, rocker aram, half coupling main pump & governor, main oil pump- 55 gpm, auxillary oil pump- 45 gpm, spring for governor, handle for speed control, rachet for governor, spring for rachet, top spindle for speed control, throttle valve filted with spindle -86/(88mm), throttle valve seat, throttle valve spring, adjustable stud for throttle valve spring, ht nut 1/2 unc, emergency steam stop valve with spindle, half coupling for emergency valve, top spindle, relay piston, relay pilot valve spindle, allen screw, high speed gear pinion shaft, thurst bearing for pinion, plain bearing for pinion, thurst bearing for gear, plain bearing for gear, oil seal holder output shaft, driving end alternator bearing, driver end alternator bearing, alternator shaft pole balancing, driver side active pad, driver side non active pad, high speed coupling, governor terminal (shaft), low speed filxible gear type coupling, spare list for -24z52 mill turbines model-24z52 o/p- 550 hp, ht nut 3/4" bsf, gasket, gasket, lower cage, trip valve cage assembly, pin dowel, valve, pilot trip, screw soc hd cap, lock washer, pin roll, bonnet , trip valve, washer, thrust, shaft trip lever, lever reset, pin cotter, pin reset lever, screw shounder, screw, lever trip, trip valve and case assamble, gasket (116x110x6mm), gasket (127x106x4mm), gasket (104x83x3mm), allen screw (7/8"x1.1/2" bsw, ht stud 3/4"x4", ht stud 3/4"x4", allen screw (3/4"x90mm bsf, mill turbine model - 24zs2, main bearing rotor front end, main bearing rotor rear end, throttle valve seat 2.1/2", throttle valve 2.1/2", throttle valve 2", governor valve steam spindle 5/16", l- gland assembly 5/16", lock nut for l gland, main oil pump 25 gpm, metaflex coupling (high speed), oil filtev element 8gp, stem spindle for throttle valve, crushing spring, z- key valve 0-5 kg/ (small), retaining ring ( horse shoe), main oil pump-25 gpm, governor drive shaft, governor drive wheel (clock wire) no of teeth (27 no), tappet reset spring, stud 3/4"x3" bsf, stud 3/4"x3.1/2" bsf, ht nut 3/4" bsf, stud ht bsf 3/4"x92mm, tappet, tappet with nut, oil reflector (shaft main), thrust bearing 3308 c3, fib - turbine model- 500 mm o/p- 1000 hp, spare list, rotor front end main bearing, rotor rear end main bearing, thrust pad holder active side, thust pad holder non active side, active thrust pad, non active thrust pad, oil seal bearing, front end bearing, 1st stage nozzle (clockwise) with spare and locking pcs, oil intel fitting 19mm, steam laby holder hp side, steam laby holder lp side, steam laby segment hp &cp, laby steam segment spring, oil laby segment spring, throttle valve seat, throttle valve fitted with spindle, pilot valve for relay cylinder, piston for relay, spring for relay, governor spindle, governor drive wheel, governor wt carrier, governor wt, governor wt carrier, race carrier, rocker aram, rocker aram spindle, needle bearing - 1816z, ball bearing 7205, fulcrum pin with split pin and washer, bal