Latest gearing machine Tenders | Government gearing machine Tenders

Central Government/Public Sector

CTN :38208077

25 Nov, 2024 NA

Multi City - Multi State

Tender For supply of set of safety washers for wag9hc/wap-7 locomotives consisting of 04 items. (1) safety wash er vs-12 as per clw drg.no. 1209-1.411-046, ref.004 for gear cases, qty/set-540 nos, (2) safety washer vs -16 as per clw drg.no. 1209-1.411-046, ref.009 for axle box cover bolts, qty/set144 nos, (3) safety washer vs-20 as per clw drg.no.1209-1.411-046 ref.006 for axle bearing cap bolts. qty/set-48 nos, (4) safety was her vs-30 as per clw drg.no.1209-1.411-046, ref.008 for tm mounting clamping plate bolts. qty/set-48 no s. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38038763

02 Dec, 2024 NA

Vadodara - Gujarat

Tender For corrigendum : supply of hand brake bevel gear box cover

corporations/Associations/Others

CTN :38182324

19 Nov, 2024 NA

Multi City - Multi State

Tender For auction sale of scrap nozzels,scrap tata bsii aircompressor (assembly),scrap tata bsiii aircompressor (body) (ms),scrap aircompressor body tata 1616 (body),scrap gear box loose items,scrap slacker body's only and slacker scrap loose items,scrap crown loose items,scrap l/l clutch assly (4 fingers) (gear box section),scrap l/l clutch top covers (4 fingers) (gear box section),scrap tata 330 dia top covers (gear box section),scrap tata 352 dia top covers (gear box section),scrap clutch back-plates (tata & ll) (gear box section),scrap clutch loose items (gear box section),scrap power steering pump, steering box loose items,scrap power - steering pump asembly's,scrap power - steering box asembly's,scrap mixed lot,scrap plastic bus bucket seat assly with or without frames,scrap ms seat assly. with or without frames,scrapped paint tins 01 ltr to 5 liter (final yard),passenger seat cushions ( to be cleared using jcb),assorted lot,scrap lot consisting of electrical items,scrap ms barrels (oil & grease barrels),scrap damaged jk doors,scrap air baloons,scrap led boards,scrap seat rexine,scrap pole ms pipes (center yard),scrap indicator cover etc,scrapped rubber,scrap empty ms grease barrels,scrap empty ms oil barrels,scrap empty ms cut, damaged & rusted barrels,scrap empty plastic barrels cut, damaged & dented,scrap wheel disc (pvt. yard),scrap wheel disc locking rings (pvt. yard),scrap brake drum (pvt. yard),scrap propeller shaft (pvt. yard),scrapped full round 900/1000x20 tubes,scrap lot consisting of tube light 2feet, 4 feet,scrap frp items,scrap used engine oil with barrels,scrap automotive pp/hr container 12v 150 ah batteries,scrap automotive pp container 12v 165 ah batteries,scrapped all types and sizes of ms radiator tank

corporations/Associations/Others

CTN :38182326

19 Nov, 2024 NA

Multi City - Multi State

Tender For auction sale of scrap gear box lower top,scrap gear box upper top,scrap clutch cover,scrap oil stearing (engine),scrap rexine with/without foam,scrap rocker arm assly.,scrap cam shaft,scrap fly wheels assly.,scrap ms seat with frames 2 seater,scrap plastic seat with frames 2 seater,scrap air dryer cartridge,scrap lot consisting of electrical items,scrap crown pinion assembly,scrap epdm & waste rubbers,scrap 2 seat (foam, rexine & wood),scrap lot of nylon tyre 8.25 x 20 lot no.n -lot,scrap lot of radial tyre 900 x 20 lot no.o -lot,scrap lot of radial tyre 1000 x 20 lot no.p -lot,scrap lot of radial tyre 235 x 75 lot no.q -lot,scrap lot of radial tyre 295 x 80 lot no.q -lot,scrap lot consisting of rexine,scrap lot consisting of ms scrap etc,scrap lot consisting of bvc/paint tin etc,scrap lot consisting of flap and epdm rubber,scrap lot consisting of plastic cans 5 lts. capacity,scrap lot consisting of ply wood etc,scrap lot consisting of fiber sheets,scrap lot consisting of electrical items,scrap 2 seater and 3 seater frames,scrap alluminium pieces,ms scrap and rusted angels etc,bvc/paint tin and empty plastic lot,scrap plywood & densified wooden floor pieces etc,scrap front & rear glass,scrap rexines,scrap epdm & waste rubbers,scrap bus bucket seat assly, with or without frames,scrap ms seat assly, with or without frames

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government/Public Sector

CTN :38192398

19 Nov, 2024 NA

Raipur - Chhattisgarh

Tender For biennial rate contract for supply of spares for everest blowers make blowers installed at various ntpc stations - , suction filter,everest,blower,65v, shaft seal set,everest,blower,65v, pair of gear,6,everest blower,blower, complete assy,crr31885&1,m450, blower assy,crr4412r0,blower,44, drive end plate,crr4412&2,blower,44, gear end plate,crr4412&3,blower,44, drv rotor shaft assy,crr4412&4,blower,44, drvn rtr shaft assy,crr4412&5,blower,44, lip seal,blower,44,de long shaft, lip seal,blower,44,de short shaft, lip seal-gear end,crr4412 & 10,blower,44, lip seal-brg cover,blower,44, brg cvr drive sft,blower,44, brg cvr driven sft,blower,44, gear cover,crr4412 & 14,blower,44, gear cover gasket,crr4412 & 15,44, timing gear set,everest,blower,44, hard taper pin,crr4412 & 18,44, key,14004120,crr4412 & 19,44, sight glass assy,crr4412 & 23,blower,44, oil drain plug,crr4412 & 24,blower,44, grease cup,crr4412 & 25,44, timing gear,6,47, bearing,8,47, oil seal,9,47, filter,everest,blower,55, bearing,everest,blower,55, dry bag air filter,blower,67, relief valve,9,6"es, blower assy,everest,67, pulley side plate,1,blower,67, main body,3,67, driving rotor,5,67, timing gear,6,67, oil seal,rr-3062-bom6es & 9,blower,67es, air filter,crr7089-67,67, air blower comp assy,67et, suction air filter,67et, press relief valve,67et, non-return valve,67et, rotor shaft assy,67et, rotor shaft assy,67et, piston ring,67et, piston bush (psp),67et, piston bush (gsp),67et, timing hub,67et, timing gear,67et, oil seal housing,67et, gear bearing spacer,67et, pulley spacer,67et, lip seal(oil seal housing),67et, lock nut,67et, star washer,67et, sight glass assy,67et, piston ring bush,a4-a70117-12-160&10, gear,everest,blower,610, oil seal,everest,blower,610, suction filter,everest,blower,610, seal,blower,610/cap/575m3, suction filter,blower,610/cap/575m3, blower assy,bom-m5vr4/1,everest blower, air filter,bom-m5vr4 & 3,m5125, suction silencer,bom-m5vr4 & 4,m5125, pressure relief valve,m5125, drv rotor shaft assy,m5125, driven shaft assy,bom-m5vr4 & 5,m5125, lip seal,m5125,de long shaft, lip seal-dne srt sft,m5125, lip seal-gear end,bom-m5vr4 & 10,m5125, lip seal-brg cover,bom-m5vr4 & 11,m5125, bearing cover drive shaft,m5125, brg cvr driven sft,bom-m5vr4 & 13,m5125, oil drain/fill plug,m5125, rotor shaft assy,bom-m5vr3/5,everest, drive shaft assy,bom-m5vr 3/4,everest, drive end plate,bom-m5vr3/2,m 5225, gear end plate,bom-m5vr3/3,m 5225, lip seal,m 5225,de long shaft, lip seal,m 5225,drvn end short sft, lip seal-gear end,bom-m5vr3 & 10,m 5225, lip seal-brg cover,bom-m5vr3 & 11,m 5225, brg cvr drive sft,bom-m5vr3 & 12,m 5225, brg cvr driven sft,bom-m5vr3 & 13,m 5225, gear cover,bom-m5vr3 & 14,m 5225, timing hub,bom-m5vr3 & 16,m 5225, timing gear,bom-m5vr3/17,m 5225, hard taper pin,bom-m5vr3 & 18,m 5225, parallel key,bom-m5vr3 & 19,m 5225, labyrinth spcr-de,bom-m5vr3 & 20,m 5225, labyrinth spcr-dne,bom-m5vr3 & 21,m 5225, gear bearing spacer,m 5225, pulley spacer bush,bom-m5vr3 & 23,m 5225, lock nut&washer,bom-m5vr3 & 26,m 5225, sight glass assy,bom-m5vr3 & 27,m 5225, blower assy,9575-162-pvm-b-149,m 5175, lobe set,secm5175r1/4,everest blower, body,sec5175r1/1,everest blower,m5175, drive end plate,everest,m 5175, gear end plate,blower,m 5175, lip seal-de long sft,everest,m 5175, lip seal-dne srt sft,everest,blower, lip seal-gear end,everest,blower,m 5175, lip seal-brg cover,everest,blower,m 5175, brg cvr drive sft,everest,blower,m 5175, brg cvr driven sft,everest,blower,m 5175, gear cover,sec5175r1 & 14,blower,m 5175, gasket gear cover,sec5175r1&15,m5175, timing hub,sec5175r1 & 16,blower,m 5175, timing gear,sec5175r1/17,m5175, hard taper pin,blower,m 5175, parallel key,blower,m 5175, labyrinth spcr-de,everest,blower,m 5175, labyrinth spcr-dne,everest,blower,m 5175, gear bearing spacer,blower,m 5175, pulley spacer bush,blower,

Central Government/Public Sector

CTN :38192457

26 Nov, 2024 NA

Mehsana - Gujarat

Tender For fabrication and repair work of different equipments parts and accessories for work over rigs of well services mehsana asset - repair of fire pump shaft with key insert slot, fabrication of cardan-propeller shaft assy. (approx. 3 inch dia hollow) of pto draw works of cw-50, fabrication of chain cover of draw works for a50 work over rigs, fabrication of base plate of starter of fire engine, fabrication of wash pipe of mud swivel (10mb and ch60) for c/w-50 & rom-50 work over rigs, repair of 03 nos. of 3pp mud pump flange, repair of both the bop pneumatic console on rom-50 and cw-50, fabrication of brake calliper shaft (02 qty on each rig) assemblies and hydraulic lines for upets rigs, fabrication of axle hub sun gear assembly cw-50-iv

CTN :38198875

04 Dec, 2024 NA

Leh - Jammu And Kashmir

Tender For supply of bush set , armature assy , fd coil assy , parking brake cable , oil filter , brake shoe frt , door lock rr , radiator assy , air filter , inlet pipe , thermostate , regulator window rh , cyl hd gkt packing kit , hd light assy , piston ring , fuel filter , ac filter , ecm , cam shaft sansor , clutch gear shifter , relay , tail light assy , horn , oil pump assy , head light assy , frt grill , loam set , flexible pipe , radiator assy bkt , gasket inlet , brake pad , axle boot , axle brg , radiater top cover

CTN :38185019

03 Dec, 2024 NA

Nashik - Maharashtra

Tender For supply of mt spares - speedo sensor , clutch release brg , fan belt , driven disk and cover assy , water pump assy , d aeration tank , spring brake chamber kit , nut , ball joint small , ball joint big , gear lever kit , clutch cyl rep kit , sleeve cyl rep kit , oil filter , fuel filter , water separator , clutch release big , clutch plate , clutch cable , clutch plate and pressure plate , release brg , gear box oil seal , sleeve cyl assy , clutch cyl assy , chain sprocket , cable assy spoeedo

CTN :38185130

03 Dec, 2024 NA

Gandhinagar - Gujarat

Tender For supply of graduated hand brake valve , clutch release bearing , speedometer cable , release bearing , clutch plate , cover assy , speedometre gear

Gearing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector