Get complete information related to latest Gi Chain Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gi Chain Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gi Chain Tenders.
Tender For tender for for providing sop to balagad chethar and khabal by providing 4630 kva,330.4kv sub station along with 33kv ht line at stage 1st in electrical section banjar under esd hpsebl banjar.sub headproviding and fixing gichain link fencing
Tender For renovation of existing tennis court with providing and fixing g.i. chain link fencing for upcomming tournament at lingaraj township of lingaraj ocp under lingraj area.
Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gichain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat
Tender For a/r & m/o c-ii type quarters at shahjahan road, new delhi dg. 2025-26 sh-renovation/upgradation in ms flat main building, servant toilet & bathroom at all floor, changing of g.i. chain link fencing in main building.subwork/packages:civil work
Tender For repair to chain link fencing, gate, grill, rcc jali, rcc pillars, acp sheet, gi sheet, periodical works for compound wall, steel surface etc at jalipa mil stn at ge(a) barmer.
Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin
Tender For supplying and fixing of gl chain link fencing of required width in mesh including strengthening with 2 mm dia gi wire/ g.i. staples/g.i.u-nails/ nuts bolts with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in m15 grade cement concrete 30cmx30cmx60cm, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall bestrutted on both sides and end post on one side only etc complete as required and as per direction of engineer-in-charge.
Tender For bid to ras supply of water supply motor mechanical items d d ? g? g - 1.5 hp control panel for submersible motor make bch 1p 230 v , 2 hp control panel for submersible motor make bch 3p 440 v , 6 inches mg ci joint , 6 inches ci sluice valve with flange , 4 inches ci sluice valve with flange , 3 inches ci sluice valve with flange , 7.5 hp control panel 3p 440 v make bch , 5 hp control panel 3p 440 v make bch , metallic blue paint 1 liter nippon , 2 inches paint brush vicky , 5 inches angle grinder 1p 230 v make dewalt , 7 inches angle grinder 1p 230 v make dewalt , 1.5 hp bore well submersible motor pump 1p 230 v 17 stage regular make texmo , 1 kal inches ashirvad pipe o ring , 1 kal inches ci ashirvad adapter male female , 1 kal inches ashirvad pipe red line , 50 mfd capacitor, keltron , 150 to 200 mfd capacitor, keltron , 200 to 250 mfd capacitor, keltron , 6 inches ss saddle piece , 4 inches ss saddle piece , 3 inches x 5.8 inches ss bold and nuts , 3 inches x 5.8 inches ss bold washer , 2 inches x 3.8 inches ss bold and nuts , 2 inches x 3.8 inches ss bold washer , 2 inches x half inches ss bold and nuts , 2 inches x half inches ss bold washer , 1 half inches x half inches ss bold and nuts with washer , 20 hp control panel, make bch, automatic star delta, 3p, 440 v , 20 hp mono black motor pump, make kirloskar,model kds 2050 plus , 20 hp submersible motor pump, make kirloskar, model ks 8b, 100 mm delivery, 3 stage, 3p, 440 v , 5 inches x 3 inches threaded reducer ss bush , 4 inches x 3 inches threaded reducer ss bush , 60 a, mcb, 4 pole, 3p, 440 v with metal box, make legrand , 16 a, mcb, 2 pole, 1p, 230 v with metal box, make legrand , 8 mm gland rope asbestos block , nylon rope 16 mm , coir rope 16 mm , 2 ton chain pulley black, make indef , shaft sleeve for kds 2050 plus, make kirloskar , gland ci for kds 2050 plus, make kirloskar , hand pump base , hand pump nose , hand handle body set , 32mm gi pipe b class medium jindal , m12 hand pump connecting rod 3mtr , m12 hand pump bolt nut and washer , hand pump cylinder , 12 inches wrenches taparia , 18 inches wrenches taparia , 1 kal inches bore clamp ms , 3 inches gi pipe b class medium jindal , 4 inches gi pipe b class medium jindal , 4 inches gi elbow unio , 3 inches gi coupling unio , half inches tap watertec , half inches tap long body watertec , half inches pillar cock watertec , half inches angle cock watertec , half inches x 6 inches gi pipe nipple b class , half inches x 12 inches gi pipe nipple b class , half inches gate valve brass life , hand pump bucket washer , rubber gasket sheet 4 mm , hand pump chain make ii , hand pump chain with bolt and nuts , hand pump handle axle ss , hacksaw plier bahco , castrol oil 1 liter can , castrol grease 1 kg , cotton waste , 2 inches bore clamp heavy , 3 inches bore clamp heavy , 4 inches bore clamp heavy , 4 inches foot valve leather kohinoor , bleaching powder 25kg , godrej lock 7 lever brass , 2 half inches green hose 30mtr , 7.5 hp open well submersible motor pump texmo , water meter 20mm //bid details 2 / 45
Tender For successful testing and commissioning of construction of chain link fencing, construction of chowkidar qtr, and providing fixing of various dia of di/gi pipes for various areas of wss aug palpora pohrupeth under ut capex