Latest gi corrugated sheet Tenders | Government gi corrugated sheet Tenders

CTN :41289002

28 Aug, 2025 NA

Shillong - Meghalaya

Tender For supply of supply of consumables /implants /devices/accessories, on consignment basis for ctvs - ventilator, invasive pressure monitoring, iv drip sets, anticoagulation monitoring and airway consumables, bain circuit adultbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., bain circuit pediatricbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., corrugated tube connectorshould allow connection between all breathing circuits and the et tube connector.thecorrugatedtubeshouldbeexpandable.shouldallowmovementofbreathingcircuitatpatientend.should be made of medical grade pvc.should be compatible with ett and tracheostomy tube., micro aggregate blood filter for red cell transfusionfilter media should be 40 micron rated polyester screen media with uniform pore sizeshould have total filter surface area of 170 sq.cmshould have average capacity of filtering 10 units of blood., packed red cell & whole blood leucocyte reduction filters.bedside filtration of one & two unit of packed red blood cells or whole bloodshould have universal spike with microbiological recovery ventshould be with attached straight administration set/automatic self leveling drip chamberperformance should consistently average less than 2x105 residual leukocytes per unitred cell recovery should average greater than 90%.filter housing hold up volume should be 25ml for one unit filter and 35ml for two unit filterit should be single use, forced warming blanketshould be disposable and two layered; should consist of non woven propylene fabric for body warming. should be usable with forced air warming units. material should be latex free and should meet flammability standard 16 cpr 1610 for safety. the manufacturer must have all the below listed types of blankets and should quote the prices separately for separate blankets full body adult underbody adult with arm and head openings pediatric full body pediatric underbody blanket. should be compatible withcommon machines. should be ce certified, cuff inflator and pressure gauge itisusedtoinflate& preciselymonitorthecuffpressureofet tube, tracheostomy tube and lma cuff. reducetheriskofpressurenecrosisandmucosal ischemia theriskofaspirationcanbeavoidedeliminatestheuseofsyringestoinflate&deflatethecuffs. should have release valve to adjust the pressure. gaugecalibratedincmh2owiththedetachablelongconnecting tube. shouldhaveinflationbulbfortheinflationofthecuffshouldhavethehookatthebackoffitsintostandardrail.should have widely spaced scale markings with colour coded pressure ranges.ergonomiconehadoperation, intubation pillow reusable intubation pillow for head elevated laryngoscopy position (help) for airway management of obese &l arge framed patients. shouldbemadeupofdensefoam. shouldbesuppliedwithheadcradle shouldbevinylcovered shouldbecemarked, negative insipratory force meter should be disposable, compact, light weight & amp;single patient use negative inspiratory force meter to check the negative inspiratory force of the ventilated patients with the facility of memory indicator point ertore cord reset highest force achieved by the patient individually packed ready for use. shouldbe ,ce marked, capnography co2 sampling mask shouldhavetheprovisionforbreathtobreathmonitoringforboth nose & mouth should have the facility to deliver oxygen; allow sampling of exhaled carbon dio

State Government

CTN :41300864

07 Aug, 2025 49.50 Lacs

Chittorgarh - Rajasthan

Tender For supply of building material & equipements supply at gp kankrwa --, sand/gravel, , gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone turning (in stonework, masonry), , soling. kharanja / masonry stone, , masonry berdada (rr), , masonry ratta (cr), , kharanja molig (for floor work upto 15cm height), , kharja soling (23cm height for mudka kharja work), , soil stoneware (for other than road work) 40mm measuring stone (hand broken grit) cut into 1/11, , 40mm stone cut (broken by crusher) 1/11, , 20mm grit stone (broken by crusher) cut into 1/11, , 12/10/6mm stone chips (broken by crusher) 1/11, , torn, , brick ballast, , cement (ppc fly ash based is code 1479 part-11991), , white cement, , structural steel, , iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , konia iron/ square bar/ patti/ angle iron, , barbed tohe wire, , size 12 gauge wire and 12 gauge strad, , plain sheet, , gi sheet 22 gauge (0.80 mm), , g.i. sheet 24 gauge (0.63mm.), , m.s. sheet 22 gauge (0.80 m.m.), , m.s.sheet 24 gauge(0.63m.μ.), , corrugated sheet, , gi sheet 1mm thick, , gi sheet 22 gauge (0.80 m.m.), , other ingredients, , ghila/kankar/jhajhra, , mud masala, , lime of kali bhatt for lime masonry work, , corrugated sheet, , asbestos cement ghaddar 6mm (2.5/2.75x1m), , other rank, , pvc wall 1mm thick (coloured / plain), , lighteruf expo sheet in green yellow (183×90), , road work materials, , 63-40 mm crushed stone aggregate cut into 1/11, , 63-40mm hand broken stone aggregate 1/11 cut, , 90-45 mm. hand broken stone aggregate 1/11 split, , qderi ravish 1/6 cut, , gravel cut 1/6, , kakar 1/11 phat, , biding material(pi 4-6), , camel (22.5 x 11 x 7.50 cm), , is class (, , izfke js.kh, , ii class, , flaky material, , ), , stone ivvh (ave. length 3" to 4", width 2", , to 3", thick 1" to 2" flaky material), , sandstone (dpc, sill, coping, lintel, tand, almirh, , a etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , 00-150mm thickness, , do. patti pattan kata stone, , curry leaves upto 35mm thick, min. 3 sqft or, , more area, , katla for butti filling 60-75mm thickness, min., , soft or more area, , palika and kodar don (3 sqft), , up to 800 sq. m, , from 201 to 2300 sq.m., , more than 2300 sq.cm, , moulish kanda stone one side polished (3 sqft) from maha, , upto 200 sq.cm, , 501 to 2300 sq. cm., , more than 2300 cm, , parbal stone (bigger than 3 sqft), , makrana adanga marble 15 to 20 cm thickness, , upto 800 sq.cm, , 901 to 2300 sq. cm rock, , more than 2300 sq.cm, , rajnagar first quality marble 15 to 20 cm thickness, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble pips, , marble powder, , stone threshold, , single patam size 100 x 75mm, , double patam size 125 x 75 mm, , stone slab, , up to 1.5m length, minimum 40mm thick, , 1.5 to2.40mlength, minimum 50mm thick, , 2.4 to3m length, minimum 65mm thick, , above 3m' length, minimum 75mm thick, , local wood with fittings (doors, windows and, , for furniture), , mango, , change, , other, , factory made doors (30mm thick, solid core single, , palle), , caste, , iron mesh (24 gauge, 14 mesh), , cement concrete mesh sky underground 40mm thick, , glass, , 3 mm nota glass, , complexion belly, , inamil paint, , distemper, , lime - for painting (rest / bud), , primer, , petroleum substance diesel hsd, , mobil oil, , bitumen shalitax board, , sanitary, , indian w.c., , omisa w.c., , european w.c, , foot rest, , porcelain lipped urinal, , 430-350-300mm with coupling, bracket and pvc., , wash-basin 450*300mm with waste pipe, , coupling bracket and pvc waste pipe, , stone brother (s.w.) pipe 100 m.m. diameter, 0.6 m. long, , c.p. pillar cock (is mark), , c p bibb kak (is mark), , 125mm diameter cp grating, , rcc np3 hyam pipe with collar, , 1200mm diameter, , 1000mm diameter, , 750mm diameter, , 600mm yyas, , l, , 450mm diameter, , 2, , 300mm diameter, , 3, , fr pvc insulated copper conductor single core, , cable

CTN :41192424

01 Sep, 2025 20.00 Lacs

Sanawad - Madhya Pradesh

Tender For corrigendum : iron material supply for the fin year 2025 26 - iron mesh (rate per kg) , iron chamber (rate per kg) , iron window (rate per kg) , iron door (rate per kg) , iron ventilation (rate per kg) , iron corrugated sheet galvanized , iron corrugated sheet plain cr/hr , iron pipes all sizes (rate per kg) , anchor bolts (rate per kg) , j hooks & visors (rate per kg) , iron angles (rate per kg) , iron strips (rate per kg) , iron girders (rate per kg) , iron galvanized wire barbette wire (rate per kg) , iron tree guard mesh (rate per kg) , iron shutters (rate per kg) , iron channel gates (rate per kg) , other iron materials (rate per kg) , iron profile sheet all sizes (rate per kg) , chain link mesh all sizes (rate per kg) , screws j hooks & screws, visor all sizes(rate per kg) , iron pipe frame all sizes(rate per kg) , iron fencing pole angle all sizes(rate per kg) , angle + sheet information board all sizes(rate per kg) , garbage cart iron (two wheeler) wheel iron , garbage cart iron (two wheeler) wheel rubber , iron plate all sizes(rate per kg) , tin shed construction and installation rate per square feet , tin shed construction and installation rate per running feet

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

Central Government/Public Sector

CTN :41201526

23 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of seat and berth set including attendant berth with corrugated ms sheet fo r lhb fac coach.follow cushioning material either pu foam to mmdts 19020 rev.05 with fire barrier cloth to mmdts 19021 rev.04 or silicon foam to rdso/2013/cg-13 with fire pr operties compliant to r21 hl-3 of en45545 standard and upholstery to rdso/2008/cg-07 with amendment slip no.5 and corrigendum 1 of may 2015.follow colour shade alac-01 f or upholstry and for powder coating of chair angles colour shade ral-9006., as per dr awing: la61003 alt a and la61219 alt a. [ warranty period: 54 months after the date of delivery ]

Central Government/Public Sector

CTN :41295773

20 Aug, 2025 NA

Delhi - Delhi

Tender For em-1/igrc/e-1716: material account note book containing 200 leaves in finished size 14 .80 cm x 10.50 cm. (plus minus 2 mm tolerance). paper to be used- maplitho paper 70 gsm conformin g to is specifications 1848/2007 or latest for text pages and paper kraft 110 gsm (gr ii- finishing) con forming to is specification no. 1397/1990 or latest for cover. the book to be printed in hindi & english bilingual in single color one side with serially numbered in duplicate as per specimen. numbering will be provided by cmps/ssb office. binding: two wire stitches on left with cover. the art work for printing and complete in all respect should be got approved from consignee before bulk supply. packing- to be packed in suitable size corrugated carton boxes of 05 ply, containing 04 bundles each of 20 books. pa cking slip must be pasted on carton box indicating po no., particulars of item, quantity and box numbe r etc. as per specn. as mention in description above [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

Central Government/Public Sector

CTN :41296240

01 Sep, 2025 NA

Delhi - Delhi

Tender For t 524 f: reservation/cancellation requisition form in size- 6 x 8.5 inch (15.2x 21.5 cm). paper to be used maplitho paper 60 gsm conforming to is :- 1848/2007 or latest amendment. the for m to be printed in hindi on front side and english on back side in black colour strictly as per specimen. binding: material should be supplied in packing of 1000 forms in each bundle. the art work for printin g and sample workmanship should be got approved from consignee before bulk supply. packing condi tions :- 03-04 bundles of 1000 forms each shall be packed in suitable size of five ply corrugated paper constructions carton box conforming to is : 2771 (part-1) 1990 with amendment no.1 and 2 and style 0620 od is 6481 : 1971. the weight of carton shall not exceed 15-16 kgs. approx. the carton shall be than closed with gum paper tap 50 mm (min.) wide and finally secured by nylon strapping of size 13m m wide 02 nos. each side. the edge of nylon strap shall be heat sealed overlapping each other by min . 25 mm. packing slip must be pasted on carton box indicating po no. & other details. specn: as menti on in description above [ warranty period: 30 months after the date of delivery ]

CTN :41275249

11 Aug, 2025 NA

Kinnaur - Himachal Pradesh

Tender For supply of puf panel 60mm for wall , puf panel 40mm for ceiling , gi based corrugated steel sheet 0 point 60mm , 3 mm thick polycarbonate sheet , hollow iron , angle or flat iron , nut and bolt , earthing , lightening arrester , main door , window , verandah cover with aluminium frame , fire extinguisher ball1kg 300gm 3 , curtain rod , 8 pin cloth hanger wall door hooks , fd heating device , steel almirah large , mattress , foot scraper , iron foot mat , white cement , looking mirror , double bunks , sealing material , ordinary portland cement , coarse sand , stone aggregate 20mm graded , stone aggregate 40mm graded , stone aggregate 10mm graded , gvt tiles 10 to 12mm , jute mat , stainless steel shoe rack , automatic silver shoes shining machine , top dust bin stainless steel , transitional end table with open shelves , cloth drying stand , stone aggregate 63mm graded , 24 watt led tube , 18 watt led tube , bulk head housing with led bulb , led 9 w bulb , angle batten lamp holder , modular electrical switch 5 amp , modular electrical switch 5 amp and socket 3 pin , modular electrical switch15 amp , ceiling rose , pvc square block , pvc casing capping 1 inch x 6 feet , pvc casing capping 1 and half inch x 6 feet , gang box 5 switches 5 amps , gang box 4 swithces 5 amps , gang box 2 switches 5 amps , gang box 1 switch 5 amps , screw full threaded half inch 200 nos , screw full threaded 1 inch 200 nos , screw full threaded 2 inch 200 nos , plastic wall screw anchor 2 inch 100 nos , plastic wall screw anchor 1 inch 100 nos , wire 1 sqmm , wire 1 and half sqmm , wire 2 and half sqmm , mcb 6 amp single pole , mcb 16 amp single pole , isolator double pole 63 amp , insulation tape 25mm , aluminium conductor cable unarmoured twin core flat 16 sqmm , distribution board 12 way , pvc flexible pipe 25 mm dia for casing caping 1 inch , pvctee for casing caping 1 inch , pvc elbow for casing caping , pvc l bend 25 mm dia , pvc tee for casing caping , 2 port usb wall socket switch charger

CTN :41263753

21 Aug, 2025 7.69 Lacs

Kottayam - Kerala

Tender For construction of shed with steel tubular structure and roof with gi corrugated sheets for thumboormuzhi compost bins. necessary steel tubular posts would be erected over rcc pedestals with base plate, gazette plate and bolts.

CTN :41237321

16 Sep, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of set of seat & berth for lwscn coaches as per drg. no. mls61001 alt-d without item no. 27, 28 & 33. cushioning material and other conditions shall be as per annexure-a1 of mcf/design lett er no. rbl md 33810 dated 29.05.2024. follow colour shade alnac-03 for upholstery and ral-9006 f or the visible metallic portions of seat & berth. note: 01 mm thick corrugated sheet to be used as per specification is: 513 (pt-1)-2016, gr.-cr2 instead of compreg panel. packing instruction: mcf pi117 ve r. 0 [ warranty period: 126 months after the date of delivery ]

Gi Corrugated Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector