Latest gi frame Tenders | Government gi frame Tenders

Central Government/Public Sector

CTN :43676701

30 Jan, 2026 9.71 Lacs

Kanpur - Uttar Pradesh

Tender For supply and fixing of park equipments for kids play at iit kanpur - carouselthe revolving merri go round shall be fabricated fromsteel and powder coated. the capacity of mgr is 8 to 10child standing. the dia of the merri go round is minimum5 feet made up of frp and the base pipe used for structureis 35 x 35 x 5mm angle along with bearings. standing baseseat should be made up of frp & using 20nb ms pipe andalso bearing shaft should be moved smoothly., lianamade up 20mm ms pipe a-class and height 6 is made upof 20 nb ms pipe. to be installed in c.c. base of size 30 x30 x 45 cm of concrete mix 1: 1 : 3 as per order byenmsneer in charge. the equipment should confirm tonational and international safety norms., teeterthe 4 seater teeter is fabricated on 50nb ms base pipeswith t handles on either side. the size of 4 seater see-sawis l-10 , b-4 made up of fibre character seats and steel.ynorms., liana calisthenicsthe frame is fabricated out of 25 nb and 20 nb powdercoated ms pipes respectively. there are nine triangularloops made from 15 nb ms pipes, which are welded to thetop pipe of the frame.the size is 6 x 6 x 8 s., sittingsupply of iron bench l-60 , b-33 with iron strips alongwith supporting pipes 20nb used & used for pu/ powdercoat first quality (as per approved design)., rps subway tubedimensions 6 feet length tunnel tube is made up of fsrwith supporting ms pipes., butterfly wobblethe 2 seater butterfly swings is fabricated on 2 mspipes.. the top pipe is fitted to the frame structure of2 connected with ms plate to the top. the seat ismade up frp chair shapes. the finish shall be electrostatically applied finished and proper fixed in cementconcrete block of size 300 x 450mm mix 1:1.5:3 asper the direction of eic, frolic zone square deck of size 4 .0 x 4 .0 :- the size of sq. deck shall be 4 .0 x4 .0 .the vertical supporting pipes shall be of minimum size 80 nb ms pipes. the horizontal supporting members shall be of m.s. angle of minimum size 40 x 40 x 5 mm or as required. the platform of of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. canopy: this canopy over square deck/rounder shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and fish of the outer surface of the canopy shall be as approved by enmsneer-in-charge double wave slide 3.0 ht :- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. layerd of tooling gelcoat shall be applied to the slide of msve it smooth finish. the supporting frame of the slideshall be made from ms pipe of minimum size 25 nb. the pipe shall be powder coated support of 20 nb ms pipes . double wave slide 7.0 ht:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. layerd of tooling gelcoat shall be applied to the slide of msve it smooth finish. the supporting frame of the slide shall be made from ms pipe of minimum size 25 nb. the pipe shall be powder coated additional h types two supports shall be provided in each slide at reasonable distance . spiral slide 5.0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm in single place and the same shall be supported on center support of ms pipes having minimum size of 80 nb .the backside of the slide surface shall be mat . layerd of tooling gelcoat shall be applied to the slide to msve it smoth finish.the landing module shall be supported on ms pipe of minimum size 20 nb powder coated ms pipes m.s steel clamps attached to it.pipe ladder :-the pipe ladder shall be made of powder coated ms pipes of minimum size 25 nb, and ladder shall be hand railing made up of 16 swg sheet steps with 20 nb, along with isi 20 nb pip

CTN :43681513

02 Feb, 2026 NA

Ferozepur - Punjab

Tender For supply of rechargeable lithium-ion battery pack 4s 4200 mah for uav power system , high efficiency propeller blade 13 inch class for uav propulsion , electrical insulation tape pvc for technical wiring application , protective cutting mat for workshop and febrication use , heat shrink tubing assorted kit for electrical insulation and wire mangement , fume extraction unit for soldering and electronic assembly work , hexagonal allen key tool kit for precision mehanical assembly , nylon cable ties or zip ties for wire harnessing and cable management , electric short circuit protection device for power system testing , precision screwdriver and interchangeable bit tool kit , pcb assembly support stand with led illumination and magnification , heavy duty utility cutting tool for workshop fabrication , isopropyl alcohol solution for electronic circuit and pcb cleaning , thread locking adhesive compound for mehanical fasteners , soldering tip cleaning and conditioning compound , desoldering wick braid for electronic repair and rework , silicone work mat for component assembly and small parts management , high temperature resistant silicone insulation tape , hot melt adhesive sticks for component fixing and cable securing , protective nylon braided sleeves for motor and power cables , composite structural frame for mini unmanned aerial vehicle 3 point 5 inch class , brushless dc motor high rpm for mini uav propulsion system , propulsion blades clockwise and counter clockwise for mini uav , integrated flight control and power distribution module for uav , lightweight visual sensor module for uav navigation and training , radio frequency communication antenna circular polarised for uav , rf video transmission module for uav high-power output , long range rf communication receiver module 2 point 4 ghz band for uav , thermoplastic filament material for additive manufacturing of technical components , high strength thermoplastic filament for additive manufacturing and prototyping //bid details2 / 23

State Government

CTN :43685486

12 Feb, 2026 21.99 Lacs

Hoigebazar - West Bengal

Tender For construction of sunshade or rainshade at sarat sadan, howrah mukta mancha open area by using tensile fabric architecture with high quality structural steel frame under beup.

Central Government/Public Sector

CTN :43502102

23 Jan, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : providing of custom bid for services - fabrication of pontoon structures and providing and fitting of pvc barrel in floating structural frame of pontoons at makardhokda iii ocm

CTN :43663447

28 Jan, 2026 2.91 Lacs

Idukki - Kerala

Tender For (retender 1) general-vandanmedu gp 2025-2026-construction of gi framed steps for pubic access adjacent to kupakallu new rki bridge

CTN :43628134

27 Jan, 2026 17.84 Lacs

Faridabad - Haryana

Tender For construction , supply and installation of frp sculpture with ms structural frame and granite base platform near sunflag chowk in ward no 36

State Government

CTN :43563694

23 Jan, 2026 NA

Pune - Maharashtra

Tender For repair and overhauling service - sushobhikaran va sudharna tadmajla classroom; sushobhikaran va sudharna tadmajla classroom; yes; buyer premises-1 providing and fixing classroom table made of 19 mm thick plywood, finished with thick decorative laminate of approved shade and make on top surface and balancing laminate on bottom. sq.ft 700 table size shall be 14 feet (l) 2.5 feet (w) with suitable internal framing, stiffeners, and supports to ensure rigidity and durability. all exposed edges shall be finished with hardwood lipping. 2 providing and fixing step-up platform table made from 19 mm thick plywood, finished with decorative laminate on top and balancing laminate on underside. sq.ft 1408 structure shall be strong enough to withstand continuous foot traffic, with proper support framing and anti-warping construction. edges to be finished with hardwood lipping. complete in all respects including material, labour, fixing, and finishing as per site requirement. 3 providing and fixing professor table made of 19 mm thick plywood, finished with decorative laminate on top surface and balancing laminate below. sq.ft 40 table shall be ergonomically designed with appropriate height and working space suitable for faculty use. edges shall be properly finished with hardwood lipping. 4 providing and fixing lecture podium made of thick plywood, finished with thick decorative laminate on all exposed surfaces. sq.ft 32 design shall be suitable for classroom / lecture hall use with slanted top surface for documents. edges to be properly finished and rounded for safety. complete including all fittings, labour, and finishing. 5 providing, making and fixing 35 mm thick flush door shutter made from solid core , laminated with decorative laminate on both sides of approved make and shade. no 4 door shall include all necessary hardware fittings such as hinges, handles, tower bolt, door stopper, and locking arrangement of approved make. 6 providing and fixing wall-towall floor carpet of approved quality, colour, and thickness suitable for classroom use, laid over prepared floor surface. sq.ft 1664 carpet shall be fixed using approved adhesive, properly stretched, aligned, and finished to avoid wrinkles and gaps. chairs for class room 7 providing and fixing classroom chair made of heavy-duty ms tubular frame, properly welded, ground smooth and finished with powder coating of approved colour to ensure corrosion resistance and durability. nos 120 8 providing and fixing faculty chair made of heavy-duty nylon base , finished to resist corrosion and wear, suitable for continuous institutional use. the chair shall be nos 4 ergonomically designed, with medium back support, moulded pu foam cushioned seat and back, upholstered with fabric of approved make and shade. false ceiling for class room 9 providing and fixing 2 feet 2 feet grid false ceiling system consisting of approved quality pre-painted gi framework, including main runners, cross tees, wall angle, suspenders, dash fasteners, and all accessories, suspended from rods, complete in all respects. sq.ft 1664 electrical work for class room 10 supply and installation of electrical conduits, pipes, copper wiring, and cabling of approved make and size including junction boxes, accessories, testing, and commissioning. nos 1664 providing and fixing of switch and socket supply and installation of 2 2 led panel light fixtures of approved wattage suitable for false ceiling mounting. smart interactive panel and audio system 11 supply, installation, testing, and commissioning of smart interactive flat panel display (ifpd) suitable for classrooms. nos 4 having features follows:- led interactive flat panel multi-touch technology built-in operating system & hardware audio & connectivity 12 pa amplifier shall be solidstate type, with inbuilt tone control, microphone and auxiliary inputs, master volume control, and overload protection. nos 4 13 providing, supplying, installing, testing and commissioning podium m

CTN :43548278

02 Feb, 2026 NA

Goa - Goa

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; fabrication of gi frame gate with wire net for protection of dog menace; service provider

Central Government/Public Sector

CTN :43588135

04 Feb, 2026 NA

Nashik - Maharashtra

Tender For supply of ms structural frame outside and inside guiding ss flap bellows covered for x-z axis spindle

CTN :43464159

27 Jan, 2026 NA

Indore - Madhya Pradesh

Tender For supply of upgradation of air pistol rifle range at ctw c c -scoring system wireless unit for air rifle and pistol with led light and scorer sw , 10 point 1 inch touchscreen display android tablet with stand , air pistol paper roll pack of 5 90mmx25xx black target paper , air pistol template pack of 10 , air rifle template pack of 10 , false ceiling with integrated electrical fittings , customised carrying case designed for 04 rifle , 6 x 4 ft vinyl poster mounted on acp sheet with focus light , acp cladding up to 4 ft height with structural frame work , precision diopter sight for air rifle , precision shooting gear- jacket and trousers , automated shooting target trolley , shooting kit bag for target system , 6x2 ft high-resolution electronic display board , servicing and up-keep of existing shooting range target system

Gi Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector