Latest gi sheeting Tenders | Government gi sheeting Tenders

Central Government/Public Sector

CTN :39665343

21 Mar, 2025 NA

Trichy - Tamil Nadu

Tender For design and supply of deck and clad sheet

Central Government/Public Sector

CTN :39708932

25 Mar, 2025 NA

Trichy - Tamil Nadu

Tender For design and supply of clad and deck sheet

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39544579

15 Mar, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For corrigendum : visual inspection of trusses supporting the deck sheet roof of tacbuilding stage iii at ntpc rihand

CTN :39557244

11 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For echp-ii ?? clearing the coal / coal dust and foreign materials daily on walkways of both side return side under belt throughout conveyors deck sheet and tail end areas & monitoring cleaning and checking the mechanical equipments of conveyor 72 & 73 .

CTN :39557251

11 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For echp-ii- upkeepment and cleaning of coal in belt feeder-4a/4b, sc-1a/1b, 2a/2b, eds-1a/1b, 2a/2b, shuttle feeder-2a/2b, deck sheet and walkways etc., at sch-ii

corporations/Associations/Others

CTN :39483694

11 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For echpii upkeepment and cleaning of coal in belt feeder4a4b, sc1a1b, 2a2b, eds1a1b, 2a2b, shuttle feeder2a2b, deck sheet and walkways etc., at schii

corporations/Associations/Others

CTN :39483857

11 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For echpii clearing the coal coal dust and foreign materials daily on walkways of both side return side under belt throughout conveyors deck sheet and tail end areas monitoring cleaning and checking the mechanical equipments of conveyor 72 73 .

Gi Sheeting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others