Latest gi steel Tenders | Government gi steel Tenders

Central Government / Public Sector

CTN :40524968

12 Jun, 2025 NA

Panipat - Haryana

Tender For supply of steel chequered plates as per is 3502 (unit - mass) (q3) , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

State Government

CTN :40505230

13 Jun, 2025 10.76 Lacs

Haveri - Karnataka

Tender For providing qc necessary equipments for qulity control labs in qc charges of work construction of kittur rani chennamma residential school at akkur village sno 98 guttala hobli in haveri taluka,haveri district - item code: sl no 1 (data rate), item description: electronic weighing, balance with battery backup of capacity 30, kg accuracy - 5 gm ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 3 (data rate), item description: electronic weighing, balance with battery backup of capacity 1kg, and accuracy-1mg ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 5 (data rate), item description: stainless steel depth, guage-150mm long ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 6 (data rate), item description: slump cone complete with, base plate and graduated tamping rod. ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 9 (data rate), item description: core cutter, dolly and, rammer of 9.5 kg one set ---- in addition to, the conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 10 (data rate), item description: rapid moisture meter, apparatus with calcium carbide powder box, 1no packed in wooden box with calibration, report ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 11 (data rate), item description: bitumen extractor hand, operated with handle ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 12 (data rate), item description: filter paper ( bundle of, 100 pieces) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 13 (data rate), item description: benzene ---- in addition, to the conditions displayed in the kppp, portal, separate general conditions sheet, uploaded and should be considered, item code: sl no 14 (data rate), item description: bosch digital camber, board range120 cm (bosch dnm120i digital, inclinometers) ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 15 (data rate), item description: digital temperature meter, / thermometer with sensor (o c to 300 c), with accuracy of +/-0.1 degree centigrade ----, in addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 17 (data rate), item description: cast iron concrete cube, mould 15x15x15cm as per isi standard (set, of 3 cubes) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 18 (data rate), item description: cast iron concrete beam, mould for flexural test 150x150x700 mm as, per isi standard ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 19 (data rate), item description: iron tray 10x12" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 20 (data rate), item description: iron tray 12x18" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 21 (data rate), item description: digital r

State Government

CTN :40541127

20 Jun, 2025 NA

West Tripura - Tripura

Tender For supply of gi steel pole 410

Central Government/Public Sector

CTN :40544936

09 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3) , steel chequered plates as per is 3502 (unit - mass) (q3)

Co-operative

CTN :40528710

04 Jun, 2025 NA

Sitapur - Uttar Pradesh

Tender For competative e-bidding for supply of cast steel items for season 2025-26 - cast steel coupling for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - new material is1030, cast steel coupling for mill size 30"x60",33"x66", 36"x72",39"x78",40"x80" - new material is 2708, cast steel coupling for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - conversion is 1030, cast steel coupling for mill size 30x60,33x66,39x78,40x80 - conversion is 2708, cast steel coupling for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - machining charges, cast steel crown pinion for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - new material is 1030, cast steel crown pinion for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - new material is 2708, cast steel crown pinion for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - conversion is 1030, cast steel crown pinion for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - conversion is 2708, cast steel crown pinion for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - profile , teeth cutting machining charges, cast steel trash plate for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - new material is1030, cast steel trash plate for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - new material is 2708, cast steel trash plate for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - conversion is 1030, cast steel trash plate for mill size 30x60,33x66,39x78,40x80 - conversion is 2708, cast steel trash plate for mill size 30"x60",33"x66",36"x72",39"x78",40"x80" - machining charges, wear ressistant steel trash plate - new material is 1030, wear resistant steel trash plate - new material is 2708, wear ressistant steel trash plate - conversion is 1030, wear ressistant steel trash plate - conversion is 2708, wear ressistant steel trash plate - machining charges, forged steel trash plate - new material is 1030, forged steel trash plate - new material is 2708, forged steel trash plate - conversion is 1030, forged steel trash plate - conversion is 2708, forged steel trash plate - machining charges, other casting i.e.trash plate beam etc. - new material is 1030, other casting i.e.trash plate beam etc. - new material is 2708, other casting i.e.trash plate beam etc. - conversion is 1030, other casting i.e.trash plate beam etc. - conversion is 2708, other casting i.e.trash plate beam etc. - machining charges

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40540330

20 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For supply of op track stores - complete supply of mild steel metal double beam crash barrier for op track as per ts , convex mirror 60 cm dia alongwith 75mm dia ms pole up to 3 mtr high with complete fittings as per ts , dwc pipe confirming of is 16205 as per tech sanction , complete plant spares for op track as per tech sanction , misc stores as per tech sanction

CTN :40540699

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40539961

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

Gi Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Co-operative

State Government