Latest gl pipe Tenders | Government gl pipe Tenders

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

State Government

CTN :43134040

30 Dec, 2025 NA

Sikka - Gujarat

Tender For supply of pipes and various rigging material -unit 2500x250 mm board for cup lock scaffolding ,unit 1500x250 mm board for cup lock scaffolding ,scaffolding pipe, galvanized, medium class, 40nb m.s.pipe, length-6mtr ,scaffolding pipe, galvanized, medium class, 40nb m.s.pipe, length-3mtr ,m.s.scaffolding clamp ,ungalvanised steel wire rope dia: 16 mm,6x36 construction, steel core, rhol, tensile strength-1770 ,n/mm2 confirmed to is: 2266/02. ,forged grip (m. s. black)/ u clamp suitable for rope dia 16 mm ,m.s.erw pipe size 65mm x 4.5mm . ,ms black erw pipe 80 mm ,carbon steel 90 deg. seamless bend of size 65 nb, astm-a106, grade-b ,carbon steel 90 deg. seamless bend of size 80 nb, astm-a106, grade-b

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

CTN :43093912

12 Dec, 2025 8.41 Lacs

Sawai Madhopur - Rajasthan

Tender For work of installing open gym equipment in ambedkar park ward no. 14 municipal council area. - based on ruidp 2023, air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi/ lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 3mm thickness, uv resistant and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in-built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall be paid separately)., sit up station: providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air swing: providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground wi

CTN :43118758

22 Dec, 2025 NA

Kharagpur - West Bengal

Tender For supply of galvanized steel pipes & tubes isi marked in length of 6 meters,

CTN :43062211

11 Dec, 2025 5.66 Lacs

Guntur - Andhra Pradesh

Tender For provision of led street lighting along mango street, svn colony, using 5.0-meter-long hot-dip galvanized octagonal poles with h.d.p.e duct pipes.

State Government

CTN :42635482

11 Dec, 2025 3.00 Lacs

Delhi - Delhi

Tender For corrigendum : supply of ferrocene , methanol , acetyl acetone , copper acetate monohydrate , potassium hydoxide , copper sulphate 5h2o , ammonium chloride , hydrochloric acid ar , sodium carbonate , acetone , benzaldehyde , bromobenzene ar , maleic anhydride , anthracene , malononitrile , ethyl cycno acetate , diethylmalonate , fumaric acid , maleic acid , p nitophenol , acetophenone , sodium borohydride , 4 tert butyl cyclohexanone , 4 bromobenzaldehyde , 1 iodobutane , benzil , chromium vi oxide , fenton reagent or fessrous sulphate , benzyl alcohol , 2 acetonaphthone , m nitroacetophenone , t butanol , potassium phosphate tribasic , p toluenesulfonic acid butyl ester , magnesium sulphate , zinc sulphate heptahydrate , potassium iodide , silver nitrate , potassium oxalate , hydrogen peroxide , hydroquinone a r , calcium chloride , benzopinacol , p acetamidobenzene sulphonyl chloride , dichloromethane , acetyl chloride , anhydrous aluminium chloride , aluminium sulphate , ammonical acetylacetone , petroleum ether , ironn ii chloride , manganese chloride , p nitro benzaldehyde , ethyl acetate , n hexane , potassium per sulphate , mandelic acid l mandelic acid , phosphoric acid ortho phosporic acid , aniline , acetic acid glacial , silicon greese , cis stilbene , trans cinamic acid , trans stilbene , sucrose , r lemonene , s lemonene , l proline , nitro substin benzaldehyde , d prolin , ceric ammoniun nitrate , bismuth carbonate , iron sulphide , lead carbonate , sodium sulphide , silver nitrate , benzoic acid , iso propenol u v , ethyl methyl ketone , phthalic acid , resorcinol , semicarbazide hydrochloride a r , tert butyl alcohol , d glactose , piperidine ar , n butyal iodide , beakers 400 ml , burette clamp fish type , burettes with boroflo stopcock class b , clamp with boss hed universal , glass dropper 6 , desiccator with cover 12 cm , blotting paper rim ordenary filter paper , whatman filter papper no 1 46x57 cm rim100 seet , funnel 2 5 cm solar glass , whatman filter papper no 1 cerculer 12 cm , conical flask 250 ml , conical flask 150 ml , volumetric flask 2000 ml , separating funnel pear shape 2000 ml , glazed tile 6x6 , iodine flask 250 ml , t l c jar , measuring cylender 10 ml , mortar pestle 4 100 mm , petri dishes , pair of tongs 6 iron , pipettes bulb 10 ml , pipettes graduated 1 ml , reagent bottles narrow mouth 250 ml , sintered crussibal g3 30 ml , sintered crussibal g4 30 ml , spatula steel 6 , test tube with rim 15x125 , wire gauge 14x14 cm , standard flask 10 ml , standard flask 5 ml , water condenser //bid details2 / 84

CTN :43067088

15 Dec, 2025 NA

Damanjodi - Odisha

Tender For supply and delivery of sanitary and plumbing for civil works at nalco, damanjodi, odisha - floor mount western commode for toilet, white colour, rectangular shape one piece ewc, s-trap 220mm, anti-fungal & anti-bacterial soft close seat cover as per is-2556, pvc seat covers of western w.c., 25 mm dia. c.p. brass flush cock of prince, health faucet with 1.2 meter hose & wall hook, 12 mm dia. cp bib cock, toilet paper holder, glazed ceramic soap dish, 100 mm dia. stoneware glazed pipe, cp bottle trap, ci floor trap with cp grating., 300 mm x 230 mm ci gully trap with cover, 110 mm dia. upvc pipes conforming to is, 13592 type b, 75 mm dia. upvc pipes conforming to is, 13592 type b, 50 mm dia. upvc pipes conforming to is 13592 type b, 600 mm x 600 mm ci manhole cover (50kg rating), 100 mm dia. c.i. pipe, 12 mm bore g.i pipe of class 'c', 20 mm bore g.i pipe of class 'c', 25 mm bore g.i pipe of class 'c', 32 mm bore g.i pipe of class 'c', 40 mm bore g.i pipe of class 'c', 50 mm bore g.i pipe of class 'c', 12 mm dia. c.p. pillar tap, 20 mm dia. gun metal gate/globe valves, 40 mm dia. gun metal gate/globe valves., 50 mm dia, gun metal gate/globe valves., 12 mm dia. pvc flexible connection pipe, 450 mm long., 600mm x 450 mm x 6 mm thick mirror with marine ply, 16 mm dia. & 450mm long c.p. brass towel rods., basic price (ex- works), c.p. soap dispenser, pvc tanks of sintex make or equivalent 500 litre capacity, pvc tanks of sintex make or equivalent 2000 litre capacity, pvc tanks of sintex make or equivalent 5000 litre capacity, dn 90 mm hdpe pressure pipes conforming to is 4984 and of grade pe 80, pressure rating pn6, dn 200 mm hdpe pressure pipes conforming to is 4984 and of grade pe 80, pressure rating pn6, dn 250 mm hdpe pressure pipes conforming to is 4984 and of grade pe 80, pressure rating pn6, urinal with sensor (henware cat. no. 60021/equivalent), oval hand wash basin with approx. size 600mmx420mm, angle stop cock (jaquar make (cat. no. flr 5053n / equivalent), automatic hand dryer, robe hook, 1200 mm x 600 mm x 18 mm granite divider, 160 mm dia. upvc rain water down take pipes conforming to is 13592 type a, ms clamp 50 mm x 6 mm for 160 mm dia. pipe fixing., g.i. tee (12 mm dia.), g.i. tee (20 mm dia.), g.i. tee (25 mm dia.), g.1. elbow (12 mm dia.), g.i. elbow (20 mm dia.), g.i. elbow (25 mm dia.), universal pipe pasting gum/ glue, 110 mm dia. upvc 90° bend pipes conforming to is 13592 type b, 110 mm dia. upvc 45° bend pipes conforming to is, 13592 type b, 160 mm dia. upvc 30° bend pipes conforming to is 13592 type a

State Government

CTN :43068194

20 Dec, 2025 1.36 Crore

Nashik - Maharashtra

Tender For supply of lab eqipment c c - digital microscope , elisa machin reader with washer , tru naat , haemoglobinometer , spirometer , roter shaker , centrifuge machine , color coded grey blood collection non vaccum tubes , micropipetes variable volume micro litre , micropipetes fixed volume micro litre , test tubes , reagent bottles with flat stopper , blood collection two way needle , glass pipettes graduated iso ce notified borosilicate or equivalent glass , evacuated tubes sodium flouride plus na edta with double cap , evacuted tubes gel with clot activator with double cap surgical store , conical flask flat bottom , non evacuated colour coded red plain tubes for blood collections , auto pipette tips micro lit , sterile universal plastic container capacity with screw cap , conical flask plastic , pasteur pipette blood bank use , puncture proof containers , tubes for sputum collection , glass staning dropping bottle , bottles for blood culture , measuring cylinder , plastic tube , coverslip , barrier tips ) /bid number: gem/2025/b/6956532 * /dated: 05-12-2025 & & / bid document1 / 33

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Gl Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations And Associations And Others

State Government

State Government

Corporations/Associations/Others