Latest glass fiber Tenders | Government glass fiber Tenders

CTN :41959829

03 Oct, 2025 NA

Bathinda - Punjab

Tender For bid to ras supply of soldering mat , soldering stand , kk2.1.5 flight controller board , glass fiber f450 quad frame , jumper wire male to male and female to female and male to female , 10 inch propeller 3cw and 3 ccw , opera glass , rubber hammer , big tool organiser , 3.7 volt 2200mah , desoldering pump , lipo checker , gps stand , led , dht 11 sensor , screw driver set , screw driver small set , screw box , 1 drill key set , shrink tube , output cables

Central Government/Public Sector

CTN :42057164

17 Oct, 2025 44.00 Lacs

Jammu - Jammu And Kashmir

Tender For supply of laboratory furniture d d - wall bench ,wb - 1, size l 2025 mm x w 600 mm x h 900 mm , over head storage cabinet with frame structure size l 645 mm x w 350 mm x h 635 mm , corner bench ,cb - 1, size l 1030 mm x w 0900 mm x h 900 mm , wall bench ,wb - 2, size l 1525 mm x w 750 mm x h 900 mm , over head storage cabinet size l 720 mm x w 350 mm x h 635 mm , chemical storage cabinet ,csc, size l 750 x d 450 x h 2100 mm , wall bench ,wb - 3, size l 1525 mm x w 750 mm x h 900 mm , island bench ,ib - 1, size l 1550 mm x w 1500 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 630 mm x w 350 mm x h 635 mm , low constant volume, lcv, type bench fume hood, size l 1800 x d 915 x h 2300 mm, for ac lab, , low constant volume, lcv, type bench fume hood, size l 1500 x d 915 x h 2300 mm, for ac lab , exhaust fan - one fan for 2 nos. 1800 mm, 1 nos. 1500 mm wide fume hood and 1 no. chemical storage cabinet , wall bench ,wb - 1, size l 4500 mm x w 750 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 720 mm x w 350 mm x h 635 mm , wall bench ,wb - 1, size l 2800 mm x w 900 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 670 mm x w 400 mm x h 600 mm , wall bench ,wb - 2, size l 2793 mm x w 750 mm x h 750 mm , over head storage cabinet size l 720 mm x w 400 mm x h 600 mm , low constant volume ,lcv, type bench fume hood,size l 1800 x d 915 x h 2300 mm, ,for ac lab, , exhaust fan - 1 nos. 1800 mm wide fume hood , low constant volume, lcv, type bench fume hood, size l 1800 x d 915 x h 2300 mm, for ac lab , exhaust fan - one fan for 2 nos. 1800 mm wide fume hood , wall bench ,wb - 1, size l 0800 mm x w 915 mm x h 900 mm , wall bench ,wb - 1, size l 7550 mm x w 750 mm x h 900 mm , wall bench ,wb - 2, size l 2050 mm x w 750 mm x h 900 mm , island bench ,ib - 1, size l 6800 mm x w 1500 mm x h 900 mm , chemical storage cabinet ,csc, size l 1000 x d 450 x h 1830mm , chemical storage cabinet ,csc, size l 1000 x d 450 x h 1830mm without exhaust system , wall bench ,wb - 3, size l 1775 mm x w 900 mm x h 750 mm , low constant volume ,lcv, type bench fume hood,size l 1500 x d 915 x h 2300 mm, ,for ac lab, , exhaust fan - one fan for 2 nos. 1500 mm wide fume hoods and 2 nos. chemical storage cabinets , wall bench ,wb - 4, size l 6800 mm x w 750 mm x h 900 mm , exhaust ducting in pp frp, round shape, construction, 3mm, 2mm, complete with necessary bends, reducers, t connections, supports, flanges, gaskets, nutbolts etc. , additional requirement the vendor has to shift and reinstall the furniture of items 1 to 25 of the paloura campus whenever the new academic block is ready at the main campus jagti , lab stools

Central Government And Public Sector

CTN :42089838

06 Oct, 2025 NA

Multi City - Multi State

Tender For supply of emergency openable window for lhb type scn coaches to rcf drg. no. ls54103 alt. c. matl.& specn.- rdso/2007/cg- 02(rev. -1) with amndt. no. 2 of aug 2016 for frp items and matl. & specn.- for the remaining item should be according to drg. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :42061367

04 Oct, 2025 8.46 Lacs

Kottayam - Kerala

Tender For items in the estimate are clearing man hole drain plumbing man coolie,scavenger,wood cutter , clearing grass frp door shutter solid block plastering hydraulic excavator tipper pump rewinding sawing machine coir water tank, and door repair etc

Central Government/Public Sector

CTN :41986792

03 Oct, 2025 NA

Vellore - Tamil Nadu

Tender For supply of open gym and play items for park : : - 10 feet frp slide , kiddies safe rotor , park rope climber tent , horse rocker , multi gym push and pull up chair single , triple twister size 7 feet diameter , elliptical cross trainer , exercise cycle , bhell mps , frog rocker

Central Government/Public Sector

CTN :42003553

14 Oct, 2025 NA

Korwa - Uttar Pradesh

Tender For non-metallic glass fiber composites, items - gasket, p/n: 6b7.840.722/kd , plate, p/n: 6b7.844.113/kd , electric insulated bush, p/n: 6b7.860.120-01/kd , locator/fixer, p/n: kmiv.741682.002/kd , bush, p/n: kmiv.757513.006/kd , holder, p/n: kmiv.741522.017/kd , holder, p/n: kmiv.741532.005/kd , support, p/n: kmiv.757551.003-01/kd , support, p/n: kmiv.757542.002/kd , support/base, p/n: kmiv.757551.003-02/kd , support, p/n: kmiv.757551.003-03/kd , frame, p/n: 6e7.804.087/kd , block, p/n: 6e7.830.034/kd , support, p/n: 6e8.128.016/kd , support/stand, p/n: 6e8.128.039/kd , plate, p/n: ap7.844.010/kd , washer, p/n: ap7.854.013/kd , gasket, p/n: ap8.683.006/kd , cover, p/n: azh7.852.144/kd , washer, p/n: azh7.854.788/kd , bush, p/n: azh7.860.506/kd , bush, p/n: azh7.860.817/kd , bush, p/n: azh7.861.068/kd , bush, p/n: azh7.861.170/kd , bush, p/n: azh7.861.180/kd , bush, p/n: azh7.861.186/kd , bush, p/n: azh7.861.532/kd , bush, p/n: azh7.861.560/kd , stop, p/n: azh8.366.275/kd , nut, p/n: azh8.939.194/kd , nut, p/n: azh8.939.195/kd , bush, p/n: nazh7.860.178/kd , support, p/n: kmiv.757542.002-02/kd , washer, p/n: kmiv.757532.089/kd , support, p/n: kmiv.757542.002-01/kd , support, p/n: kmiv.757542.002-04/kd , body, p/n: 6e7.800.017/kd

CTN :42028326

17 Oct, 2025 NA

Netanar - Chhattisgarh

Tender For supply of glass fiber seal for rh degasser

CTN :41833547

03 Oct, 2025 15.33 Lacs

Chhabra - Rajasthan

Tender For corrigendum : providing and fixing of glass fiber sheet in residential accommodation at r-3, r-4 and r-5 quarters (phase-i) at ctpp colony

CTN :41991560

06 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of export quality pwi tool kit model tk-1 for rgm machine consisting of following items- 1.clearancegauge bg 2. shim feeler gauge.3. stepped feeler gauge 4. tapered gauge. 5. gap gauge. 6. rail thermometer similar to model mfmbt-a. 7. pair of versine holder. 8. versine scale. 9. nylon cord on winder. 10. magnifying glass.11. adjustable mirror for checking cracks. 12. vertical wear measuring gauge similar to model vwg-1. 13.vernier caliper. 14. track square. 15. rail profile plotting curve. 16. steel scale 12 inch /300 mm. 17. outside caliper150 mm. 18. inside caliper 150 mm. 19. spirit level similar to model sl-2. 20. white clad pocket steel tape 3 meterslong. 21. white clad pocket steel tape 20 meters. 22. straight edge 10 cm. 23. pocket torch. 24. data book with pen.25. calculator (scientific). 26. glass fiber safari well padded box with lock & key arrangement provided with well cushioned double decker system to avoid loss & damage of instruments make- pie/loram or similar [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41992070

27 Oct, 2025 NA

Kapurthala - Punjab

Tender For supply of shell sub assly kit for 3 ph memu/dmc bhel(2 nos. dmc) coaches, as per drawing: mp25bheldmckit version 1, packing instruction: returnable & re-usable metallic pallet item should be supplied in returnable & re-usable pallet made of steel. the design of the pallet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, compatible with each other when stacked. " able to withstand the rough handling of common logistic systems such as fork lifter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pallet lined with suitable material(like frp ) so as to prevent damage to the item being transported. while stacking the item inside the pallet, there should be minimum use of disposable packing. " the pallet should have firm's logo for identification. firm should also indicate pl no., description of item on the pallet. note : 1.for packing the individual item(s), the use of material which are not environment friendly such as wood/polyethene/plastic is prohibited,however the environment friendly plastic can be used. 2.the item should be packed in such a way that it should not rub during transportation. the in-transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm from cde/rcf before initiating manufacturing. 4. note added that loose items should be supplied as per dycple-i letter no. rcf/hsq/plg/ppsh/13631 dated 30.08.2025 [ warranty period: 30 months after the date of delivery ]

Glass Fiber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector