Latest glaze Tenders | Government glaze Tenders

Central Government/Public Sector

CTN :42195749

30 Oct, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : machining and coating on welded item (cradle) to be done by the vendor as per drawing and scope of work as provided in annexure-w

Central Government/Public Sector

CTN :42312122

05 Nov, 2025 NA

Jamnagar - Gujarat

Tender For tender for supply of m16x65 bolt gr.8.8 with spring washer, castle nutand split pin. as per drawing wd-86081-s-61 alt-14item no.09 , mild steel washer inner dia: 20.5 mm +- 0.5mm;outer dia: 26.5 mm +- 0.5mm; length: 10 mm +-0.5mm; thickness: 3 mm +- 0.2mm; gap: 17 mm +-1.0mm , m10x50 long bolt gr 8.8 with spring washer and double nut as per drawing wd-86081-s-61 alt-14, item no.30., m16x80 bolt gr.8.8 with spring washer, castle nut and split pin. as per drawing wd-86081-5-61 alt-14, item no.09, m10x45 long bolt grade 8.8 with spring washer and double nut. as per drg. wd-86081-5-61 alt-14 item no.25., m12 castle nut gr.8.8 with dia. 3.2x40 split pin. as per drawing wd-86081-5-61 alt-14, item no.10, corded small angle grinder 125 mm wheel size of ratings: 900w, single phase, 230v ac, 50hz similar to model gws 900-1255 of bosch or as per, annexure-l, attached., make:, bosch/hitachi/makita., corded small angle grinder 125 mm wheel size of ratings: 900w, single phase, 230v ac, 50hz similar to model gws 900-125s of bosch or as per, annexure-l, attached., make:, bosch/hitachi/makita., hex head bolt m16x130 high tensile, as per drawing: is:1364(part-1)-1992-10.9, coating as per mdts-057, make: rdso approved vendor.

CTN :42286910

24 Oct, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of arch , orthodontic wire niti size 17 into 25 upper and lower arch pkt of 10 , orthodontic wire niti size 18 into 18 upper and lower arch , 019 into 025 niti upper and lower pkt of 10 , orthodontic wire ss size 016 upper and lower arch , orthodontic wire ss size 018 upper and lower arch , orthodontic wire ss size 16 into16 upper and lower arch , orthodontic wire ss size 016 into 022 upper and lower arch , orthodontic wire ss size 18 into 18 upper and lower arch , 019 into 025 ss upper and lower pkt of 10 , steel abrasive strip pkt of 10 , active self ligating bracket , damon q2 passive self ligating bracket with complete wire set , polycrystallin bracket clear 022 mbt , high quality vaccum forming sheets 1mm hard , high quality vaccum forming sheets 2point5mm soft , high quality vaccum forming sheets 3mm soft , captain ortho red settling elastic pkt of 1000 , bondable 1st molar tube ur ul lr and ll 100 each with laser marking 022 mbt , arch wire stops 16 into 22 , 16 copper niti performed upper and lower , prolene suture 5 0 60 to70 cm 3by8 reverse cutting 15 to 20 mm , silk braided size 3by0 70to76 cm reverse cutting 1by2 circle needle 20to25 mm , vicryl reverse cutting suture 3 0 needle 3by8 needle length 22 mm , ethyle chloride spray , glucometer strips , glocometer needles , soframycin tube , bur fissure 7mm for shp 702 , bur fissure 5mm for shp 703 , bur round 7mm for shp , bur round 5 mm for shp , sterile suction tube , absorbable porcine gelatin sponge box of 10 , bone graft biphasic synthetic hydroxyapatite and beta tricalcium phosphate granules 0point5 to 1cc , surgical vulcanite bur , inj bupivacaine , lindemann bur , twist drill 50by18mm into 1point 6 hss shaft for 2 mm dia screw , twist drill 60by25mm into 1point3 hss shank for 1point5 to1point7 mm dia screw , drill bits recon , steri strips for sterilization indication , sterilization pouch pkt of 100 , gauze absorbent folded 2point5cm into 100m , senquel ad mouth wash , calcium sulphate bone graft , blade 15c , edta irrigant , kelsogen powder and liquid , paracore kit , periodontal ab plus fibers pkt of 02 , interlig composite splints , gtr membrane , osseograft dbfm , chlorhexidine gluconate 0point2 percentage wbym mouth wash bott of 20ml , stolin gum paint , inter dental brush , nova bone putty graft with gun , face shield studds , prophylaxis polishing brush pkt of 10 , disposable patient drape , chlorhexidine gluconate 0point2 percentage w by m mouth wash bott of 100ml , desensitising paste tube of 50 gm , dental floss , glycerin glycerol , hydrogen peroxide , dental napkin , disposable pmt set , 400um glass bare fibre sma 905 3meter , indelible pencil pps marking , bite registration paste silicon based set of two cartridges of 48 to 50 ml each , soft denture liner , anterior strip crown , intraoral photographic mirror set of 03 with contraster , gp point 6 percentage , paper point 6 percentage , crown and bridge plaster diestone super hard for pkt of 100 gms , teeth acrylic cross linked set of 28 complete comprising one set each of upper and lower anterior teeth and one set each of upper and lower posterior teeth , cotton buff , sand paper , polishing cake , red cervical wax , wax blue for inlay , crown and bridge spacer die 20 to 30 ml bottle with thinner , die lubricant , sprue wax in assorted sizes in mm , investment powder pressvest , investment liquid pressvest , ingots shade ht a1 box of 05 , ingots shade ht a2 box of 05 , ingots shade ht a3 box of 05 , ingots shade ht b2 box of 05 , ingots shade ht a3 point 5 box of 05 , plunger ips , plunger separator , ips silicone ring 100gm , ips silicone ring system 100gm , all ceramic and ceramic finishing kit , //bid details 2 / 104 metal finishing kit , flexi denture finishing kit , ceramic separating disc , vita dentin a2 , vita dentin b2 , vita dentin a3 , vita dentin a1 , vita dentin b1 , flexi denture cartridge , lucitone powder and liquid , dpi heat cure clear , silicone spray , glaze liquid and

Central Government/Public Sector

CTN :42267818

29 Oct, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of c73340415174 supply of high static pressure ductable ac unit capacity 8point5 tr having one indoor and one out door unit consisting of scroll compressor refer annexure iii , 100000000001 supply of suitable size refrigerant grade copper piping between indoor and outdoor units of ductable split ac units 8point5 tr refer annexure iii , 100000000002 providing cpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iii , 100000000003 providing of cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iii , 100000000004 supply of site fabricated gi sheet metal ducts of 22 guage birmingham gauge 0point8 mm and zinc coating not less than refer annexure iii , 100000000005 supply of thermal insulation for supply air ducts with 19 mm class o thick self adhesive closed cell elastomeric refer annexure iii , 100000000006 supply of acoustic insulation for ducting with open cell nitrile rubber insulation or open cell physically crosslinked polyolefin foam refer annexure iii , 100000000007 supply of volume control dampers vcd for ducts made of gi sheet of thickness not less than 18 g refer annexure iii , 100000000008 supplying of xlpe insulated, pvc sheathed, armoured, copper conductor 1point1 kv grade lt cable of size 4 core - 6 sqmm refer annexure iii , 100000000009 supply of xlpe insulated, pvc sheathe, copper conductor, , 1point1 kv grade lt cable of size 4 core - 2point5 sqmm refer annexure iii , 100000000010 supply of 300 mm width x 50 mm depth x 1point6 mm thickness perforated hot dipped galvanised iron cable tray with cover refer annexure iii , 100000000011 supply of 150 mm width x 50 mm depth x 1point6 mm thickness of perforated hot dipped galvanised iron cable tray refer annexure iii , 100000000012 installation testing and commissioning of high static pressure ductable ac unit ) /bid number : gem/2025/b/6778840 * /dated: 13-10-2025 & & / bid document 1 / 20 & & ' ' /item category capacity 8point5 tr refer annexure iv , 100000000013 erection testing and commissioning of suitable size refrigerant grade copper piping between indoor and outdoor units of ductable split ac refer annexure iv , 100000000014 laying of cpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iv , 100000000015 laying of cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iv , 100000000016 fabrication installation testing and commissioning of site fabricated gi sheet metal ducts of 22 guage refer annexure iv , 100000000017 fixing thermal insulation for supply air ducts with 19 mm refer annexure iv , 100000000018 fixing acoustic insulation for ducting with open cell nitrile rubber insulation or open cell physically crosslinked polyolefin foam refer annexure iv , 100000000019 erection testing and commissioning of volume control dampers vcd for ducts made of gi sheet refer annexure iv , 100000000020 laying of xlpe insulated,pvc sheathed, armoured,copper conductor,1point1 kv grade lt cable of size 4 core - 6 sqmm refer annexure iv , 100000000021 laying of xlpe insulated, pvc sheathe, copper conductor 1point1 kv grade lt cable of size 4 core - 2point5 sqmm refer annexure iv , 100000000022 installation of 300 mm width x 50 mm depth x 1point6 mm thickness perforated hot dipped galvanised iron cable tray with cover refer annexure iv , 100000000023 installation of 150 mm width x 50 mm depth x 1point6 mm thickness of perforated hot dipped galvanised iron cable tray refer annexure iv , 100000000024 dismantling and shifting of existing ductable indoor and outdoor 23 x8point5 tr outdoors are installed at roof tops of first to third floor refer annexure iv , 100000000025 dismantling and installation of existing false ceiling approx 800 sqfeet for installation of ductable split ac above false ceiling with all fitting same as before refer annexure iv

Central Government/Public Sector

CTN :42300066

21 Oct, 2025 NA

Multi City - Multi State

Tender For lwscn shell complete (a) one coach set of roof, 2 mm side wall and end wall for lscn coaches 1) roof assembly to drg no 58216001, alt 'n'- 1 no. welding pin to be assembled as per drg no 58210045 alt 'nil' (with latest sub drawing 49516008, alt 'a') 2) end roof assembly to drg no 58116066, alt 'h'- 2 nos. 3) location of sidewall to drg no 75314013, alt 'nil'- 1 no, 3mm thick to rdso spec-ck201 x2crni12 sheet to be used for manufacturing side wall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt 'h'- 2 nos. (b) body shell items.1) 58210036, alt 'b' - 2 nos. 2) 75310003, alt 'a' - 1 no. 3) 67010011, alt 'a' - 2 nos. 4) aaa10488, alt 'c' - 4 nos. 5) 58110017, alt 'c' - 2 nos. 6) 58110015, alt 'a' - 3 nos. 7) 58110016, alt 'a' - 6 nos. 8) aab10338, alt nil- 16 nos. (c) under frame complete to drg no 73911001 alt 'm' - 1 no. assembly of (a),(b) and (c) shall be done as perdrg no.75310001 alt 'b' (d) installation items 1) body side entrance door installation as per drg no.58252001 alt 'a' -1 no. 2) foot step complete to drg no. 58124004 alt nil -4 nos. 3) exterior garniture to drg no. 59326001 col-i alt 'j' -1 nos. 4) application of epoxy coating. 46590003 col-1 alt 'e' -1 nos. 5) roof ventilator assly -01873401 col-i alt 'r' - 7 nos. 6) coupler mounting -46021001, col-i alt 'e'(aar h coupler to pl no. 33549771 -2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75390002 alt 'id' may be followed. the firm shallfulfill the requiremnt as per as per icf/md/spec-451, issue status-01 rev.01, amendment-01. special condition : - suitable packing should be done to prevent damage during transit and unloading. - installation required as per assy. drg.& annexure-a, dtd 13-09-2023 to be followed. - supply rates and installation rates to be quoted separately. [safety item ]

Central Government/Public Sector

CTN :42300067

21 Oct, 2025 NA

Multi City - Multi State

Tender For lws shell complete (a) one coach set of roof, 2 mm sidewall and end wall 1) roof assembly to drg no 58116032, alt 'l'- 1 no. welding pin to be assembled as per drg no 58110037, alt 'nil' (with latest sub drawing49516008, alt "a") 2) end roof assembly to drg no 58116066, alt "h"- 2 nos. 3) sidewall to drg no 75214023,alt "nil"- 1 no. 3mm thick to rdso spec. c k-201 x2crni12 sheet to be used for manufacturing sidewall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt "h"- 2 nos. (b) partition frames & body shell items and floor supports 1) 75210012, alt "nil"- 1 no. 2) 75210002, alt "nil"- 1 no. 3) 58210036, alt "b"- 2 nos. 4) 75210003, alt"a"- 1 no. 5) 67010011, alt "a"- 2 nos. 6) aaa10488, alt "c"- 6 nos. 7) 58110017, alt "c"- 2 nos. 8) 58110015, alt "a"- 6 nos. 9) 58110016, alt "a"- 3 nos. 10) aab10338, alt "nil"- 16 nos. (c) under frame complete to drg.no.67011001, alt 'r'- 1 no. the firm shall fulfill the manufacturing requirement of icf/md/spec-451,issue status-01, rev-01, amendment-01. assembly of (a),(b) and (c) shall be done as per drg no. 75210001, alt'b' (d) installation items 1) body side entrance door installation as per drg no. -58152001, alt "b" -1 no. 2) foot step complete to drg no. 58124004 alt "nil"-6 nos. 3) exterior garniture to drg no. 59326001 col-ialt "j" -1 no. 4) application of epoxy coating. 46590003 col-1 alt "e" -1 no. 5) roof ventilator assly -01873401 col-i alt "r" - 7 nos 6) coupler mounting -46021001 col-i alt "e" (aar h coupler to pl no. 33549771 -2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75290002, alt 'id' to be followed. special condition : suitable packing should be done to prevent damage during transit and unloading. installation required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. supply rates and installation rates to be quoted separately. [safety item ]

Central Government And Public Sector

CTN :42217427

30 Oct, 2025 NA

Kaiga - Karnataka

Tender For sanitory ware and fittings - supply of toilet seat(iwc)-indian style squatting pan with orissa pattern squatting pan (size- 630 x450 mm) confirming to is:2556(part3) latest. specification: (1)location of flushing inlet- located at broad end, (2)flushing rim type- open rim type, (3)type of trap-p type with inspection vent , (4)colour- white, (5) foot rest provide- yes, supply of european style washdown water closet conforming to is:2556(part-2) latest. specification: (1) pattern 1 (fig1a), (2)type of trap- s-type, (3)colour- white (15 nos) 3. supply of seat cover for water closet confirming to is:2548(part 2) latest & suiting to item no-02. specification: (1)material of seat and cover- polypropylene, (2) material of buffer- rubber, (3) colour- white., supply of lever type flushing cistern. specification: (1)operating mechanism- lever type, (2) flushing operation- single flush system, (3)capacity- 10 ltr, (4) flush pipe- included, (5) material of flush pipe- pvc, (6)material of cistern: acrylonitrile- butadiene-styrene(abs), (7) length of flush pipe- 300mm, (8) wall thickness of cistern(+/-5%)- 1.01mm, (9) colour- white. note: cistern fixing kit with anti rusting non corrosive screws and washers to be supplied along with cistern., supply of seat cover for water closet confirming to is:2548(part 2) latest & suiting to item no-02. specification: (1)material of seat and cover- polypropylene, (2) material of hinging devices- suitable plastic (with reinforcement) (3)material of buffer- rubber, (4) rigidity- grade 1 (5)colour- white., supply of urinal bowl (flat back) without flushing rim confirming to is2556(part 6) latest. specification: (1) size- 410 x 265 x 305 mm, (2) pattern- wall hung urinal flat back without flushing rim, (3) colour- white., supply of vitreous china sinks/washbasins confirming to is2556 (part 4) including supply of nuts, bolts and fixing bracket / support accessories. specification: (1) pattern- flat back, (2) overall length (+/-10)- 40cms, (3) overall breadth (+/-10)- 60cms, (4) overall height (+/-10)- 40cms, (5)shape- oval, (6) colour- white, (7)waste hole- 32mm, (8)fixing arrangement- wall hung., supply of waste coupling for washbasin confirming to is2963 latest. specification: (1) material of waste fitting- leaded tin bronze confirming to grade 2 of is 318/1962 (2)nominal size- 32mm for washbasin. (3)thickness of ni-cr coating - not less than service condition number 2 of table 3 of is 1068/1993, supply of pvc flexible waste pipe. specification: (1) type of waste pipe- flexible, (2)material of pipe- pvc, (3)material of waste coupling attached with pipe- pvc, (4)basin connection size- 40mm, (5) length of pipe- 750mm, (6) pipe outer diameter- 40mm, (7)pipe wall thickness- 1.0mm, (8)colour- white.

CTN :42201377

22 Oct, 2025 NA

Multi City - Multi State

Tender For supply of spiral bevel gear (small), used in samsung -sector door, specifications- material- m.s,coating- blackening, no. of teeth-25, no. of holes-3, bevel shaft (z27:m:1:5) 250, inner dia 12mm, outer dia@45'46@5mm, height-22mm, key way slot 4.5mm approx. actual size, dimensions & fitment should be as per dmrc sample. warranty-minimum one year note-self certificate to be provided byvendor for geniunity of material used as per specifications. note-before quoting and participating in tender, vendor must check the sample of item at tele/afc store chawari bazar for its original actual size & specifications, so that quotation could be given as per required actual size & specifications." ]

Central Government/Public Sector

CTN :42185872

23 Oct, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of hex head bolt m12 x 100 - 10.9 (ht) as per specn. no. is:1364(pt.1)/ 2023, is:1367(pt.3)/ 2017 & ce coating as per rcf/mdts-057 rev. nil and the item should be procured from rdso approved sources of axle end high tensile cap screws. [ warranty period: 48 months afterthe date of delivery ]

CTN :42186243

11 Nov, 2025 NA

Multi City - Multi State

Tender For supply of set of punched washers for fiat bogie consisting of 03 items. item no.1. punched washer a14 (16nos) to is:2016-1967 , material : steel to is:2062/2011 (reaffirmed 2021), coating as per mdts-057. item no.2. punched washer a18 (32 nos.) to is:2016-1967 , material : steel to is:2062/2011(reaffirmed 2021) , coating as per mdts-057. item no.3. punched washer a22 (16nos) to is:2016-1967 , material : is:2062/2011 (reaffirmed 2021) , coating as per mdts-057. [ warranty period: 30 months after the date of delivery ]

Glaze Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector