Latest governer apparatus Tenders | Government governer apparatus Tenders

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

CTN :38184754

03 Dec, 2024 NA

Kolkata - West Bengal

Tender For tender for supply of statutory items for medical dept - distance visiontesting drum , led x-ray illuminator single panel , absorbabale suture chromic catgut , non-absorbable suture black braided silk , surgical artery forcep , medical stainless steel needle holder , stainless steel teeth forceps , nebulizer mask - disposable , kidney tray , havells led torch light , tynor wrist - arm sling- adult , blood glucose test strip , flowmeter with humidifier , blood glucose meter - glucometer , eye wash cup , stich-suture cutting scissor , milton first aid box , headband magnifying glass with light

CTN :37520744

15 Nov, 2024 NA

Kamrup - Assam

Tender For bid to ras procurement of 16 portable chemical earthing kitsincl earth test meter - portable mobile chemical earthing kits , earth test meter , copper wire 1 core 10 sq mm 100 mtr roll , nut bolt andthimble , copper strip 1 inch x 12 inch x 3 mm

CTN :37998624

20 Nov, 2024 NA

Panaji - Goa

Tender For corrigendum : supply installation and commissioning of lab. equipment for mechanical engg dept - separating & throttling calorimeter with mini boilerfeatures: determining the vapour content usingo a separating calorimeter with cyclone water separatoro a throttling calorimeter with vapour depressurization using an h-s diagramspecifications:supplied vapour temperature: 240 c pressure: 10barsafety valve: 10barmeasuring ranges temperature: 0 400 c pressure (inlet): 0 16bar pressure (outlet): -150 100mbar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 800 x 1700 mm weight (approx.): 110 kg, steam turbine power plant setupfeatures steam power plant and its components start-up, operation and shut down of a steam power plant closed steam-water circuit with feed water treatment among others, determining:o boiler efficiencyo mechanical/thermal efficiency of the turbineo condenser efficiencyo specific fuel consumption of the plantspecificationsteam generator steam output: 200kg/h at 11bar fuel consumption: 12l/h heat-up time: 8min pressure: 13barsuper heater power: 7kwsingle-stage axial turbine with curtis wheel and hydraulic speed regulator power: max. 1,5kw at 3000min-1water-cooled condenser cooling capacity: 98kw transfer surface: 2,5m2measuring ranges temperature: 9x 0 400 c, 2x 0 100 c flow rate: 0 167l/min (cooling water) pressure: 3x 0 16bar, 1x 1bar torque: 0 20nm speed: 0 4000min-1400v, 50hz, 3 phases400v, 60hz, 3 phases, 230v, 60hz, 3 phasesdimensions and weight l x w x h: 3500x 2500 x 2250 mmweight (approx.): 2250 kg, rotary air compressor test benchfeatures: to study all components/accessories used in rotary air compressor. to study & determine isentropic work, actual work volumetric efficiency, isentropic efficiency & free air delivery at different delivery pressure. to plot volumetric efficiency/isentropic efficiency against delivery pressure & comment on the nature of the plot.observations can be taken by air compressed in storage& free condition. instrumentation: sensors with digital displays software for data acquisition via usbspecifications: vane compressor rotary compressor, driven by 3 hp motor. calibrated orifice meter with water manometer to measure air intake. energy meter to measure input of the meter. pressure gauge to measure discharge pressure. control valve at delivery side. stop clock.dimensions and weight: l x w x h: 1500x 1500 x 1250 mmweight (approx.): 320kg, marcet boiler test apparatusfeatures: recording the vapour pressure curve of water presentation of the relationship between pressure and temperature in a closed system temperature and pressure measurementspecification:bourdon tube pressure gauge: -1 24bartemperature limiter: 200 csafety valve: 20barheater: 2kwboiler, stainless steel: 2lmeasuring ranges temperature: 0 200 c pressure: 0 20bar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 600 x 600 mmweight (approx.): 45 kg, rope brake dynamometerpower 0.5 kwvoltage 220 vphase single phasefrequency 50 hzmaterial stainless steelwheel size 45 cm, cam analysis apparatus capacity 7. 5 hpphase 3 phasespeed 1500 rpmfrequency 50 hzmaterial stainless steel 304color blue, slip gauge set steel sets with high wear resistance.47 & nabl calibrationslip gauge set steel sets with high wear resistance. high level accuracy and reliability of measuring results are guaranteed by precise calibration. provided with nabl traceability if required. sets of m46, m87, m112. metric/imperial., bevel protectorblade length 150mm w/60, 40degree edges, required stand and type, sine bar range 200mm for checking concentricity, run out of sharpness taken & degree checking, digital outside micrometerspecification range 0-25mm, digital vernier caliperspecification range 0-150mm/6 , radius gaugeradius gauge 1-7mm, surface plate granite a grade 24 x 36 inch in a class granite, mechanical comparator analog type with dia

CTN :38184838

03 Dec, 2024 NA

Rajauri - Jammu And Kashmir

Tender For supply of lab equipment - compound microscope , eye piece for microscope , conical flask , petridish , watch glass , test tube stand , water bath copper , dissection box , beaker glass , ph meter pen type , ph paper , sprit lamp s s , funnel glass , thistle funnel glass , iron rtand with clamp , prepared slides , plane slides , cover slip , dropper glass , measuring cylinder , measuring cylinder large , pipette glass , slides on a p tissues , charts , specimen in jars , formline , methanol , acetic acid , hcl , pot hydroxide , sod chloride , sod hydroxide , sulphuric acid cons , sulphuric acid dil , acetocarmine , gimesa stain , leishman stain , copper sulphate , cobalt nitrate , methylene blue , glycerin , white marker board , laboratory table , almirah steel with glass door , stool for lab , slotted rack steel three side covered

CTN :37815711

22 Nov, 2024 NA

Kamrup - Assam

Tender For corrigendum : procurement of 1200 scmh gas engine driven cng compressors - 1200 scmh skid mounted gas engine driven cng compressor package-item 1.1 of mr , lcv trailer panel complete with mass flow meter-item 1.2 of mr , transportation upto delivery location and other costs incidental to delivery of goods for item no. 1.1 , transportation upto delivery location and other costs incidental to delivery of goods for item no. 1.2 , installation, commissioning and field performance test-item 2.1 of mr , operation charges for compressors for cachar ga for 1st year -item 3.1 of mr , operation charges for compressors for cachar ga for 2nd year -item 3.2 of mr , operation charges for compressors for cachar ga for 3rd year -item 3.3 of mr , operation charges for compressors for cachar ga for 4th year -item 3.4 of mr , operation charges for compressors for kamrup ga for 1st year -item 3.5 of mr , operation charges for compressors for kamrup ga for 2nd year -item 3.6 of mr , operation charges for compressors for kamrup ga for 3rd year -item 3.7 of mr , operation charges for compressors for kamrup ga for 4th year -item 3.8 of mr , annual comprehensive maintenance charges for compressors for cachar ga for 1st year -item 4.1 of mr , annual comprehensive maintenance charges for compressors for cachar ga for 2nd year -item 4.2 of mr , annual comprehensive maintenance charges for compressors for cachar ga for 3rd year -item 4.3 of mr , annual comprehensive maintenance charges for compressors for cachar ga for 4th year -item 4.4 of mr , annual comprehensive maintenance charges for compressors for kamrup ga for 1st year -item 4.5 of mr , annual comprehensive maintenance charges for compressors for kamrup ga for 2nd year -item 4.6 of mr , annual comprehensive maintenance charges for compressors for kamrup ga for 3rd year -item 4.7 of mr , annual comprehensive maintenance charges for compressors for kamrup ga for 4th year -item 4.8 of mr

CTN :38175665

02 Dec, 2024 NA

Ananthnag - Jammu And Kashmir

Tender For supply of arrows , ranging rods , offset rods , pegs , prismatic compass , surveyors compass , tilting level , plane table with allstandardaccessories , gunia for layout , tangent clinometer , ghat tracer , pantagraph , current meter , blaine airpermeabilityapparatus , compactionfactortestapparatus , sand replacement test apparatus , standard proctor test apparatus , modified proctor test apparatus , unconfined compression test machine , bitumen penetrometer with automatic time controller , ductility test of bitumenapparatus , cleveland flashpointand firepointapparatus , moulds , searles apparatus , specific gravitywaterabsorptionofaggregates , column buckiling apparatus

CTN :38162961

29 Nov, 2024 NA

Hazaribag - Jharkhand

Tender For soil investigation - carry out soil investigation including drilling test bore holes maximum 12 meter deep or 02 mtr in hard rock , contractor submit report to this office with photographs of video recording etc , contractor submit report hard copy quintuplicate with cd , rate inclusive all tools and plant labour charges mobilization and demobilization. , trial pit size 1 meter depth

CTN :38175441

02 Dec, 2024 NA

Khurda - Odisha

Tender For supply of laminar flow cabinet horizontal 4x2 inch 52x40x601 by 2 , water bath 15 ltrs capacity with 06 holes rt plus 5 degree c plus 99 , auto clave vertical ss 25x450 mm 22 ltr , digital temperature controller cum indicator , digital timer , auto pressure cut off system , hot air incubator 50 ltr cap and temp set rt plus 5 degree c upto plus 65 c degree , colony counter digital count upto 9999 , ammonia testing kit , milk adulteration testing kit , formalin test kit , weighing scale , milk heater , milk analyser , lacto meter , probe thermometer , egg tester electric , refrigerator 230 ltrs

CTN :38172246

19 Nov, 2024 NA

Netanar - Chhattisgarh

Tender For supply of circuit breaker time interval meter test kit

Governer Apparatus Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector