Get complete information related to latest Graph Indicator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Graph Indicator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Graph Indicator Tenders.
Tender For supply of intelligent universal programmer specification: (i) 48 pin dil/zif socket with respectable for 8 pin to 48 pin,300/600 mil devices.(ii) four dac for vcc,vpp1,vpp2 and vpp3 with 8 bit resolution. softwar e controllable rise time and current limit protection (iii) logic driver supports pull-up/pull down or high imp edance on all 48 pins with 2v-5 v level.(iv) memory: prom,eprom,eeprom, flash,serial prom,nvram (v ) logic:pal,gal,cepal,cpld,epld (vi) others: otp/flash microcontrollers (vii) hex automatic detection and conversion (viii) accepts jedec test vectors upto 48 pins 2500v/micro second rise time(ix) working with wi ndows 10(64 bit) model: elnec or similar. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 – 25) , outside micrometer (25 – 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling
Tender For providing services for data collection at river gauging stations (stage water level), automatic rain gauge stations & standard rain gauge stations under kolad sub division from dated .01/06/2025 to 31/10/2025.
Tender For tggenco-ytps (5x800mw)-supply of certain materials for the maintenance of railway siding track of yadadri thermal power station.-, rail cutting machine having petrol engine, 6.5 hp, 3800 rpm, 50 hz with cutting wheel of dia 350 mm, , rail hole drilling machine having petrol engine, automatic, 5 hp, 3800 rpm, 440 v, 50 hz, 2 shaft, , angle grinding machine having 230 v, 50 hz, 1200 rpm, 600 w, 2 way, gws 600 bosch with grinding wheels, , brush cutter machine having petrol engine, 4 stroke neptune, 1 hp, bc-99, gx-35 of honda or equivalent, , welding machine having 3 phase, 400 amp, 415 v, 50-60 hz with copper lug connector, 16 sqmm copper & 25 sqmm earthing cable, 1 holder, 1 leather hand gloves, 1 auto darkening welding helmet, , mild steel mechanical track lifting jack of 15 ton capacity having base area 155 mm x 300 mm, lifting stroke @ 280 mm, 25 kg weight, , spiking hammer of 4.50 kg capacity with long handle suitable for fixing rail clips, , mild steel sleeper tangs for shifting concrete sleeper one place to other place, , mild steel rail tangs for shifting rails one place to other place, , mild steel crow bars of dia 32 mm & 1680 mm long for packing ballast around the sleeper, , mild steel ballast fork with handle for digging ballast, , carbon steel pickaxe of 20 inch long, , iron shovel/spades with long handle, , motor pans of 18 inch dia & made with plastic, , mild steel jim crow for straightening rail, , aluminum level cum gauge with glass level, spirit level, , 100 cm long straight edge, , canne-a-boule, , rail thermometer, , mild steel panja (railway track ballast spreading), , ruler, scale, steel, 30 cm, , chain pulley, spur gear, monorail, 3t, 6 m, , double ended spanners (ribbed) 36 x 41, , nylon rope, diameter: 1/2 inch of 100 m length
Tender For supply, erection, testing & commissioning of conference system at law librarymuglisara main office in central zone of surat municipal corporation. (2nd attempt) - sitc of delegate unit shall enable delegates to speak and listen to the proceedings via a loudspeaker or headphones. the unit shall include a microphone with a red indicator ring, which shall illuminate when the microphone is on.the unit shall include a possible to speak white led indicator, which shall illuminate showing the delegate when it is possible to switch on the microphone.to prevent acoustic feedback, the built-in loudspeaker shall be muted when the microphone is on, and/or the headphones are connected.two 3.5 mm stereo headphone sockets (wired for mono) shall allow two pairs of headphones to be connected, enabling two delegates to simultaneously use the unit.the headphone volume level shall be adjustable on the unit for maximum comfort. it shall also be possible to connect a tape recorder to one headphone socket, and use the other headphone socket to listen to the proceedings. [approved by competent authority i.e. not below the rank of executive engineer ], sitc of delegate unit shall enable delegates to speak and listen to the proceedings via a loudspeaker or headphones. the unit shall include a microphone with a red indicator ring, which shall illuminate when the microphone is on.the unit shall include a possible to speak white led indicator, which shall illuminate showing the delegate when it is possible to switch on the microphone.to prevent acoustic feedback, the built-in loudspeaker shall be muted when the microphone is on, and/or the headphones are connected.two 3.5 mm stereo headphone sockets (wired for mono) shall allow two pairs of headphones to be connected, enabling two delegates to simultaneously use the unit.the headphone volume level shall be adjustable on the unit for maximum comfort. it shall also be possible to connect a tape recorder to one headphone socket, and use the other headphone socket to listen to the proceedings. [approved by competent authority i.e. not below the rank of executive engineer ], sitc of control unit plug-and-play functionality for quick and easy, connection of up to 80 discussion devices, intuitive web browser interface control for advanced, configuration and control, on-board support for automatic hd camera control [approved by competent authority i.e. not below the rank of executive engineer ], sitc of control unit plug-and-play functionality for quick and easy, connection of up to 80 discussion devices, intuitive web browser interface control for advanced, configuration and control, on-board support for automatic hd camera control [approved by competent authority i.e. not below the rank of executive engineer ], sitc of extension cable (male to male) between the units or between the controller and unit -2 meter long [approved by competent authority i.e. not below the rank of executive engineer ], sitc of extension cable (male to male) between the units or between the controller and unit -2 meter long [approved by competent authority i.e. not below the rank of executive engineer ], sitc of extension cable (female to male) between the units or between the controller and unit -15 meter long [approved by competent authority i.e. not below the rank of executive engineer ], sitc of extension cable (female to male) between the units or between the controller and unit -15 meter long [approved by competent authority i.e. not below the rank of executive engineer ], sitc of delegate unit shall enable delegates to speak and listen to the proceedings via a loudspeaker or headphones. the unit shall include a microphone with a red indicator ring, which shall illuminate when the microphone is on.the unit shall include a possible to speak white led indicator, which shall illuminate showing the delegate when it is possible to switch on the microphone.to prevent acoustic feedback, the built-in loudspeaker shall be muted when t
Tender For corrigendum : purchase of biochemistry lab equipments - fully automatic biochemistry analyzerthroughput: 200 photometric tests/hour & 400 tests/hour with ise (optional)reagent positions: 50 cooled reagent positionssample type: whole blood, serum, plasma, urine, csf otherreading volume: 180 lsample volume: 2-70 l (adjustable in 0.1 l)reagent volume: 10-300 l (adjustable in 1 l)light source: halogen lampon board laundry: 6 stage cleaning, 2 stage drying with cuvette validation stepcalibration type: linear, non-linear, multipointprogrammable parameters: default system pack parameters + upto 10 user defined parametersdimensions and weight: ergonomic design and light weight., fully automatic hematology analyzerthroughput-up to 80 samples per hourdimensions and weight ergonomic design and light weighttest mode-cbc, cbc+diffdata storage capacity-up to 100 000 resultscommunication-lan port supports hl7 protocolpower requirement-a.c. 100-240 v, less than or equal to 300 va, 50/60 hzoperating temperature-15 to 30 degree celsiusoperating humidity-30-85%air pressure70-106 kpa, fully automatic immunoassay analyser random assay (hormone analyser)instrument name: immunoassay analyserusage/application-clinicalplate format-random assaydetection method-luminescenceparameters-blood alcohol contentautomation-fully automaticuser input-touchassays-diabetes, thyroid, cardiac, vit d, fully automatic electrolyte analyser-analysis time: 60 second per sample parameters- na , k , cl or ca2+no. of parameters 3 simultaneously90 luser inputs 5 colored touch screen displayelectrode type- sturdy electrode (facility to refill the solution)connectivity 2 usb port, rs232, lisdata storage- 10,000 patient results & 10,000 qc results for 3 levelssample identification- alphanumeric sample idqc management- tri-level quality control, l j plots of last 30 dayscalibration- 2 point calibration on every 4 hours1 point with every samplepower - 100 240 v, 50/60 hz (self adjusting)printer - inbuilt thermal printerroom temperature -15 30 c / 60 90 fhumidity- 85%dimensions and weight - ergonomic design and light weight, centrifuge machine along with 500 prp test tubes (double spin)parameter- neya-16 max speed (rpm)- 15000max rcf (g)- 21000max capacity (ml)- 4 x 175acceleration profiles- 10deceleration profiles- 10display-- multi-color lcdno of programmes- 10 (protected)timer- 30 sec to 99 min & continuous modeergonomic design and light weightsupply - 220v, 50 hz, 1 phasecan be used for extracting prp, autoclavekey features- high-pressure vessel: a high-pressure vessel designed to withstand high temperatures and pressures- temperature control: precise temperature control to ensure effective sterilization- timer and controls: easy-to-use timer and controls for convenient operation- safety features: multiple safety features, such as automatic shut-off and overheat protection, to prevent accidents and ensure safe operationconstruction and materials- stainless steel: a durable stainless steel construction to withstand high temperatures and pressures- insulation: high-quality insulation to ensure efficient heat retention and energy savings- door and seals: a secure door and seal system to prevent steam escape and ensure effective sterilizationperformance specifications- temperature range: 121 c to 134 c.- pressure range: upto 30 psi- cycle time: 15-60 minutes- sterilization capacity in liters or cubic feetsafety standards- compliance with regulations: compliance with relevant regulations, such as asme, fda, and iso standards- automatic safety devices: automatic safety devices, such as overheat protection and low-water cut off, to prevent accidents and ensure safe operation- interlocks: interlocks to prevent door opening during operation and ensure user safetyadditional features- data logging: optional data logging capabilities to track temperature, pressure, and cycle data- printed records: optional printed records of cycle data for documentation and quality control- val
Tender For supplying and fixing of 02 nos. automatic boom barrier facility alongwith civil works for newly proposed level crossing lc-2 in sipat stageiii area
Tender For a.m.c. of instrument and spares - a.m.c. of instrument & spares, amc for boiler no. 1, 2 & 3 of drum level control system with, calibration, repairing, r-commissioning, with steam flow meter & alarm system etc., amc for boiler no. 1, 2 & 3 temperature monitor system, calibration, repairing, r-commissioning,, amc for power turbine of bearing digital temperature monitor system, calibration, repairing, r-commissioning,, amc for d- super heater exhausting line of automatic temperature calibration, repairing, r-commissioning,, amc for centrifugal machine automatic super header control system with, calibration, repairing, r-commissioning, amc for sulphar furness no. 1,2 & 3 of temperature indicator, calibration, repairing, r-commissioning,, amc for raw juice, sulphided juice, injection water & exhaust system temperature monitor system, calibration, repairing, r-commissioning