Tender For design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturers works, packing, supply of metering skid - supply of metering skid including design, engineering, procurement of materials and bought out items/components, drawing approval from client, manufacture, assembly at shop,inspection, packing, transportation at site etc. as per job specification, on fot point of dispatch for indigenous bidders for iocl digboi refinery at, assam, india
Tender For supply of under frame arrgt for memu/ndmc2/3ph to drg no. 78211001, alt 'a', col 1. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : special care to be taken for under slung items while transit, loading and unloading. the underframe should be supplied as normal side up and side bearer side down. packing to drg no. icf/j&t/misc-2487,alt-'b'. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weldparameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]
Tender For supply of one coach set of body shell items for m & m2 coaches (mrvc phase ii)to drg.nos. icf/mrvc/m/bt-1-0-008/col.i, alt 'c' -1no icf/mrvc/m/bt-1-0-009/col.i, alt 'b' -1no icf/mrvc/m/bt-1-0-010/col.i, alt 'g' -1no icf/mrvc/m/bt-1-0-013/col.i, alt 'a' -1no icf/mrvc/m/bt-1-0-015/col.i, alt 'a' -1no icf/mrvc/m/bt-1-0-023/col.i, alt 'b' -1no. special condition : - packing as per icf/j&t/sk-1865, alt 'a'. all the items are to be supplied as coach set only. [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of panel for shovan chair car coaches for bangladesh railways, as per drawing: edts-463, rev-nil, packing instruction: electrical panels to be protected with transparent biodegradable polythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by fork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 100mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, top bottom arrow mark etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number for bulk items) of the manufacturer or e)date of manufacture f)delivery challan no. g)delivery challan date 2. the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/25-26/06 date: 16-02-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For supply of inspection kit for brake controller consisting of 3 items to wsf part no. or equivalent w.rly drg.no. as follows: 1). piston packingring wsf ref. no.84 ,wsf part no a82331/1, equivalent w.rly drg.no.tr/rs/emu 1168 item/fig no.4 =1 no. 2) diaphragm wsfref no.158, wsf part no.j 73924/10 or equivalent =1 no. 3) diaphragm wsf ref no.70, wsf part. no.j 71512/1, equivalent w.rly drg.no. tr/rs/emu 1168 item/fig no.6 =1 no.(make: m/s.wsf/softex engg/veekay rubber products/sujan industries/manish rubber industries or their authorised dealers only to quote) [ warranty period: 30 months after the date of delivery ]
Tender For supply of general stationery items : - cloth duster big size , printed cloth envelop size16x12 inch , printed cloth envelop size 10 x12 inch , eraz-ex , envelop brown 11x5 inch , file cover in pcs , file board in pcs , gum paste 150 ml , note sheet pad 13.5x8.5 , brown packing tape 1.5 , register 2qr. 96 sheet , register 4qr. 192 sheet , stamp pad small , stapler machine 10 no , stapler 10 no. pin , stapler machine 24x6 , stapler pin 24x6 , tag white 9 inch bundle of 100 nos , plastic dustbin , xerox paper a4 size 500 sheet , glowstick gum in pcs , plastic pokar , post id pad in pcs , high lighter in pcs , paper punch , marker
Tender For supply of set of steel items sidewall (crew & guard room) for lhb ac power car eog coaches as per drg. no. mplswslwlrrm version 0, packing instruction - pi146 ver. 03. [ warranty period: 30 months after the date of delivery ]
Tender For quotation for the supply of stationery items technotip gel pen (blue) , technotip gel pen (red) , techno tip gel pen (black) , technotip gel pen (cireen) , refill for technotip gel pen (b) , refill for techno tip gel pen (black) , refill for techino tip gel pen (red) , refill for techno tip gel pen (green) , link occean gel (red) , link occcan gel (blue) , link occean grl (black) , fort dot pen (blue) uur & throw , flair writo meter pen (blue) , wood pencil (hit) (apsara) , wood pencil (extra dark) , pencil sharpner , eraser , cd ohp marker pen fine (faber-castell) [mack) , camlin fine tip permanent marker 11 mm) (mack) , camlun fine tip permanent marker (mm) (blact , permanent marker (blue) , permanent marker (red) , permanent marker (green) , permanent marker (black) , highlighter (faber-castfet (pink) , highlighter (faber-castle) (green) , duracel battery (aa) , duracel battery (a ) , a4 [75 gsm] (jk copier) , ah (legal size) (75 gsm] (jk coper) , note sheet pad legal size (green) , brown paper , packing paper (multi colour) best quality , sutli duri fine quality , good quality cotion roll (2") , paper weight , double tape (both side transparent) good quality , cellotape (1) transparent , cellotape (2") (transparent) , electric bilh (100 watts , rubber band (small) , rubber band (big) , book hinding aul needle , tr extenual hard disk seagate , tb external hard disk wd , 2 tb external hard disk seagate , 2 tb external hard desk, wd
Tender For supply of set of ermeto fittings for air brake of lhb gs coaches., as per drawing: mplefgslhbfur version 5, packing instruction: set of ermeto fittings:- each item of the set should bepacked individually after covering the threaded portion with suitable cap to prevent thread damange in bio-degradeable polythene packet invariably clearly mentioned the part no. of the item on it. all the items of set then collectivelly packed in card board box of sufficent strength, further tied with suitable no. of nylon strips. a well protected list should bepasted on each box bearing purchase order no, pl no., description, drg./spec./part no., qty., firms name & address, date of despatch etc. the transit damange if any shall be at the costof supplier. make brand : gem, or similar [ warranty period: 30 months after the date of delivery ]