Latest graphite sheet Tenders | Government graphite sheet Tenders

Central Government/Public Sector

CTN :39572257

15 Mar, 2025 NA

Hyderabad-T - Telangana

Tender For supply of silica ramming mass

Central Government/Public Sector

CTN :39596423

17 Mar, 2025 NA

Haridwar - Uttarakhand

Tender For supply of dry ramming mass

CTN :39562834

24 Mar, 2025 1.47 Lacs

Kochi - Kerala

Tender For purchase of chemicals and components for physics,chemistry,zoology,botany and computer science - purchase for chemicals and components, convex lence (liquid lens)focal length - 18 cm, mercury lamp 125w ( bulb only ) connetion similar to osram 125 w, reading lens, glass prismrefractive index 1.5, diode in4007, grating lpi500 lpi, grating 600 lines/ mm, small angle prisum, resistance wire ( resistivity - 1 microohm -m diameter 0.7 mm, connection wireinsulated copper diameter 0.5 mm, newtons rings ( lenses set only), 7 segment display-suno56ca ( ry30110), capacitor, 102, 103, 104, 230, 10uf -15 each, transistors,bc 107b, 187p34, 188 s35,ksp22a, 7812, bc 548, - 15 each, ic 4017, ic4046, ic7412, ic555, ic565, ic741, ic7414, ic4000, ic4002 - 15 each, resister, ohm 100,470, 270, 390, 150, 22- 25 each, resistors k ohm - 1k, 2.2k, 2.7k, 10 k, 6.8 k, 6.8 k, 6.75 k, 5.5k, 22k, 31 k, 47k 100k, 120k, 220k ( 25 each ), 9v battery, aa battery 1.5v, aaa battery 1.5 v, led bulb red,green, blue (10 each), sand papper grade-1000, aluminiun foil, round magnetic stirring bar with pivot ring:-material:ptfe/alnico v magnet, size:6x10mm,, round magnetic stirring bar with pivot ring:-material:ptfe/alnico v magnet, size:8x22mm., alumina tray - 25 ml -b, alumina tray - 100 ml b, alumina crucible100 ml b, graphite electrode 6 mm dia *150, ito coated glass1cm *1 cm size, graphite sheet 0.5 mm thickness, nikel foil0.6mm thickness - 2 sheet, super p carbon 5 g, pvdf>99%- 50 g, n methyl pyrrolidine ( n mp)500ml 1 bottle, glass rodemax 12 v, wire stripper, testtube 5ml &10m1glass - 6 each, rubber glovessuitable for furnace application - 2 pair, reagent bottles, plain n/m with screw cap (250 ml) cat - 150002470179090 - borosil, reagent bottles, plain n/m with screw cap (100 ml) cat - 150002470179090 - borosil, reagent bottles, amber, narrow with screw cap (100 ml)70179090 - borosil, diluent for dna extraction (himedia, 500 ml), anti abd 3 x 10 ml (j. mitra), lamposolv (nice, 500 ml), nitric acid (nice, 500 ml), isopropyl alcohol - 99% (nice), potassium permangante - (nice, 500 gm), d-glucose anhydrous (dextrose, nice, 500 gm), sodium bicarbonate (nice, 500 gm), alpha glucosidase enzyme10 mg x 2, p-nitrophenol- -d-glucopyranoside 100 mg x 1, maleic acid 100 g x 1, dialysis membrane- 705 meter x 1, phosphoric acid 500 ml x 1, abts (2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) 500 mg x 1, potassium persulphate 500 g x 1, monosodium hydrogen phosphate 500 g x 1, disoidum hydrogen phosphate 500 g x 1, cinnamic acid 500 gm x 1, biphenyl 100 gm x 5, benzene 500 ml x4, benzoyl chloride 500 ml x 2, hexane 2.5 ltr x 2, hydrochloric acid 500 ml x 30, methanol 2.5 ltr x 6, nitric acid 500 ml x 10, nitro benzene 500 ml x 4, phenyl hydrazine 250 ml x 2, sulfuric acid 500 ml x 10, toluene rectified 2.5ml x 3, borsches reagent125 ml x 5, phenolphthalein solution 125 ml x 5, sodium bicarbonate 500 gm x10, silver nitrate 25 gm x 1, charcoal activated 250 gm x 2, dish wash liquid 2 liters, surgical gloves 100x5, tlc silica aluminium sheet 20x20cm50, spatula big 200, beaker 50 ml, beaker 250ml, beaker100ml

Central Government/Public Sector

CTN :39171274

06 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

CTN :38901645

05 Mar, 2025 NA

Katni - Madhya Pradesh

Tender For bid to ras supply of ramming mass dry type j-2

CTN :38901654

05 Mar, 2025 NA

Katni - Madhya Pradesh

Tender For bid to ras supply of ramming mass daka dry type-jsq

Central Government/Public Sector

CTN :39256526

07 Mar, 2025 NA

Koraput - Odisha

Tender For corrigendum : supply of magnesite ramming mass, as per attached specifications

Central Government/Public Sector

CTN :39420557

13 Mar, 2025 NA

Hyderabad-T - Telangana

Tender For supply of arc furnace basic ramming mass m - 95

corporations/Associations/Others

CTN :39368312

07 Mar, 2025 11.09 Crore

Veraval - Gujarat

Tender For proposed development of chopati at veraval dist. gir-somnath (phase-2) - excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to any lead. (a) for loose or soft soil, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (b) dense or hard soil, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (c) hard murrum, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (d) soft rock not requiring blasting, filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10 ton), filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete., filling in foundation and plinth with black garden soil in any thickness completed., filling in foundation and plinth with black cotton soil in any thickness completed., filling in foundation and plinth with soft black cotton soil in any thickness completed., coursed rubble masonry with stone of approved quality in foundation and plinth in cement mortar 1:4 (1 cement : 4 course sand) etc. complete., providing and laying cement concrete 1:3:6 (1-cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) and curing complete excluding cost of form work in. (a) foundation and plinth, providing 100mm thick m-200 controlled cement concrete road using tremix vaccum dewatering system with providing and fixing & removing of "c" channel having size 75 x 75 mm as per required level slope and thickness of concrete and levelling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed. including making expansion joint of size 20 x 110 mm & filling the expansion joint using coplar 200 as per manufactures specification by cutting of joint using concrete cutter machine etc. complete, providing 100mm thick m200 controlled coloured cement concrete road using tremix vaccum dewatering system with providing and fixing & removing of "c" channel having size 75 x 75 mm as per required level slope and thickness of concrete and levelling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed. with colour pigmentation as 5 percentage to 10 percentage of cement consumption per m3 as directed by engineer incharge or consultant including making expansion joint of size 20 x 110 mm & filling the expansion joint using coplar 200 as per manufactures specification by cutting of joint using concrete cutter machine etc. complete, providing laying ordinary cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rc coping/cap, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundations, footings, base of columns and mass concrete, providing and laying reinforcement for r.c.c. work and bending binding & placing in position completed upto floor two level thermo mechanical treated bars(crs) as per i.s. standard, white stone bela masonry block in course in super structure with stone of approved quality in lime mortar 1:6 (1-cement : 6-coarse sand) including packing the joints etc. complete. (up to 10 ton), pointing on coursed stone masonry with cement m

CTN :39359313

17 Mar, 2025 NA

Gaya - Bihar

Tender For supply of magnesite wet ramming mass as per rwp specification no. rwp/m/specn-1/059/2018 alt [a ]

Graphite Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others