Latest gravel sale Tenders | Government gravel sale Tenders

CTN :41099878

31 Jul, 2025 NA

Indore - Madhya Pradesh

Tender For supply of spray anaesthetic surface bott of 100 ml,hand piece lubricant spray bott of 500 ml,butane gas refiller for blow torch,blow torch for root canal,reinforced dental stone die stone,dental unifloss pack of 50,bis acrylic resin based provisional kit for chair side temporary crown work,periodontal pack non eugenol two paste system of base catalyst 90 gm each,patient bib plastic,interdental brush pkt of 05,box denture and appliance,nickel chromium metal pellets,disc aluminium oxide for cutting and separating nickel and chrome cobalt alloy size 25 x 0 point 5 mm pkt of 100,chlorohexidine gluconate 0 pont 12 percentage w or v mouth wash bott of 100ml,gauze absorbant folded 2 point 5 cm x 100 metres,rolls absorbent cotton dental assorted sizes in box of 500,sterilization pouches disposable pkt of 200,2 point 5 percentage gluteraldehde cydex solution,porcelain build up brushes sizes 6 8 and 10,advansync 2 orthodontic fixed functional appliance size 06,matrix band tofflemire pkt of 10,anticaries mouthrinse containing pot

CTN :41101040

07 Aug, 2025 NA

Panchkula - Haryana

Tender For supply of tower type ac of capacity 2 ton, 3 star rating, floor standing,split type ac of capacity 1.5 ton, 3 star rating,ss stand for inner unit suitable for 2 ton tower ac,ms stand for outdoor unit suitable for 1.5 ton ac,installation charge for 2 ton tower ac,installation charge for 1.5 ton tower ac,copper pipe heavy duty 5 by 8 inch and 3 by 8 inch with insulation,copper pipe heavy duty 1 by 2 inch and 3 by 4 inch with insulation,copper cable 4 core, 4sqmm, 100 volts grade,copper cable 3 core, 2.5sqmm, 1100 volts grade,refrigerator top up as per requirement,sub main wiring with 2x4 sqmm neutral and phase and 1x2.5 sqmm earth wire including suitable size conduit pipe and all necessary fitting,sub main wiring with 2x2.5 sqmm neutral and phase and 1x1.5 sqmm earth wire including suitable size conduit pipe and all necessary fitting,mcb spn 06-32 amps 230 volts 10ka,mcb box suitable for up to 32 amps spn mcb,drain pipe pvc of size 25mm dia,cutting chases pinning in stone concrete block or slab wall and making good to fa

CTN :41075377

30 Jul, 2025 NA

Chandigarh - Chandigarh

Tender For supply of nail 25 mm , nail 50 mm , upvc pipes 110 mm , 6 mm ply board , anti-termite solution , sliding door bolts 200 mm , portland pozzolane cement , wood cutting blades 125 mm , door handles 200 mm , door spring , metal drill bit 9.8 mm , ceramic glazed wall tiles 20x30 cm , plain glass 4 mm 1828x1220 milimeter , steel butt hings 125 mm , ms wire mesh , plywood 19 mm thick 8 ft x4 ft , ms wood screw number 35x5mm , door stopper , tower bolts 150 mm , wooden beading patti 25 mm , stone aggregate bajri , flush door 35mm isi marked , turpentine oil 20 liter , systhetic enamel paint 4 liter each , washed sand , ceramic clay glass puttin , tapcrete 20 ltr , rehri , hammer drill

CTN :40860659

23 Jul, 2025 4.99 Lacs

Thiruvananthapuram - Kerala

Tender For materials and supplies - ni-cr alloy for metal- ceramic crown-1 kg pkt bego wirocer plus type.ni 65.2%, cr 22.5%, co cr dental casting alloy 1 kg packet bego wirobond c type co 60.2%, cr 25 %, ceramic powder -bottle vita type. 50gm bottle., corrective ceramic powder-bottle vita type. 12gm bottle, stain powder -bottle (vita type. 5gm bottle), glaze powder -bottle (vita type. 5gm bottle), glaze liquid -bottle vita type. 20ml bottle, ceramic modelling liquid - bottle vita type. 250ml, ceramic modelling liquid(opaque) -bottle vita type. 250ml, casting ring liner-roll (bego fleecy inlay strip type.), die pin -1 box (koryo type. twin pin - male- female components. zn, ni plated.), carborundum disc -pkt of 100 pcs (38mmx0.6 to 0.7mm thickness.), aluminium oxide sand 110 microns -20kg tub.bego korox type. corundum blasting material made from 99.6 % aluminium oxide, aluminium oxide sand 250 microns -5 kg tubbego korox type. corundum blasting material made from 99.6 % aluminium oxide, hacksaw blade -pkt of 144 pcs yeti multiflex type.0.18x3mm., plaster of paris -5kg pkt.ramraj type.algitex type. lead free, alginate-750 gm pkt, dental stone -3kg pkt (kalabhai type), die stone -3kg pkt(kalrock type), investment powder- carton(bego type. phosphate bonded.80x160gm pkt in 12.8kgcarton), investment liquid-1 litre(begosol type), crucible-pkt of 6(bego type. large size. ceramic), thinner- bottle(renfert/yeti), die spacer-1000 (renfert type. blue. microns 15/yeti), die hardener-1650 renfert/yeti type, debubbilizer-bottle renfert type/dfs/bego, die lubricant-bottle renfert type, pattern wax -box renfert type, articulating paper-packet, disc mandrel-each dfs type, flexible diamond disc- each dfs for ceramic finishing., carbide burs for metal trimming-each(cross cut standard. edenta type 5610.045hp), carbide burs for metal trimming-each(cross cut fine. edenta type 5620.045hp), carbide burs for metal trimming-each(cross cut super fine. edenta type 5730.045 hp), carbide burs for metal trimming-each(cross cut standard. edenta type 5410.060), carbide burs for metal trimming-each(cross cut standard. edenta type 7010.060), carbide burs for metal trimming-each cross cut standard. edenta type 0110.023, carbide burs for metal trimming-each cross cut super fine. edenta type 0130.023hp, carbide burs for metal trimming-each contouring fissure bur. edenta type c1.104.005, carbide burs for metal trimming-each tapered fissure. edenta type c33.104.012, carbide burs for metal trimming-each(crosscut fine. edenta type 7720.023hp), carbide burs for metal trimming-each(ceramic finishing bur airotor.edenta type tc850.3.314.014), carbide burs for metal trimming-each(cross cut fine. edenta type 7220.060hp), coated diamonds for ceramic trimming-each (needle. edenta type 859.104.018), carbide burs for metal trimming-each (flame.edenta type 860.104.010), carbide burs for metal trimming-each pointed bud. edenta type 368.104.023, carbide burs for metal trimming-each round end taper. edenta type t5856.104.023, sintered diamonds for ceramic trimming-each fine. edenta type 5009hp, sintered diamonds for ceramic trimming-each (fine. edenta type 5023hp), sintered diamonds for ceramic trimming-each (fine. edenta type 5025hp), ceramic abrasives-each (edenta type.rm733.035hp), ceramic abrasives-each (edenta type.gm733.035hp), mandrels-each(disc. edenta type 4007hp), mandrels-each (screw type. edenta type 4004hp), exa cerapol for finishing ceramics-each (edenta type. 0330hp), exa cerapol for finishing ceramics-each (edenta type. 0394hp), exa cerapol for finishing ceramics-packet (edenta type. 0310um), exa cerapol for finishing ceramics-each cerapol super 0375hp, alphaflex single step metal polishing (cerapol)- each edenta type.0001um, each edenta type.0023um, each occlusal polisher. edenta type 11002um, each occlupol mandrel. edenta type 11007hp, diamond discs-each ultra flex extra fine. edenta type 366.504.220hp, each(plaster cutting disc.edenta type 365.524.300hp), tissue paper- each(

CTN :41048777

21 Jul, 2025 87.71 Lacs

Belagavi - Karnataka

Tender For supply of lot-7 items to belagavi zone prisons - cpb-g.c. yarn-3/6s, cpb-g.c. yarn-10s, cpb-g.c. yarn-2/10s, cpb-g.c. yarn-2/20s, cpb-g.c. yarn-2/40s, cpb-g.c. yarn-20s, cpb-g.c. yarn-6s, cpb-different colours dyed yarn-2/20s, cpb-different colours dyed yarn-2/10s, cpb-different colours dyed yarn-10s, cpb-different colours dyed yarn-6s, cpb-different colours dyed yarn-20s, cpb-greece, cpb-h.s. woollen yarn, cpb-hydro chloric acid, cpb-hydro sulphate of soda, cpb-caustic soda, cpb-leather belt loom , cpb-loom spring , cpb-mobile oil, cpb-naphthol colour, cpb-salt., cpb-shuttle tongue (pin), cpb-sodium nitrate, cpb-tino pal, cpb-turkey red oil, cpb-vat colour, cpb-washing soda, cpb-direct dyes, cpb-shuttle pegs, cpb-fire wood, cpb-blouse hooks , cpb-bobbin tailiring, cpb-bobbin case, cpb-colour thread (different shades) , cpb-measuring tape, cpb-thread tube (all shades) , cpb-white button, cpb-cutting scissors steel 10inch 12inch, cpb-khaki thread tube , cpb-khaki zips , cpb-pressing canvas, cpb-pant patti canvas, cpb-pressing button, cpb-hand needles, cpb-khaki button, cpb-over lock thread , cpb-pocket cloth , cpb-machine oil, cpb-pant hooks, cpb-machine needles , cpb-marking chalk, cpb-white thread tube, cpb-elastic , cpb-castor oil, cpb-coconut oil., cpb-caustic soda., cpb-creosote oil , cpb-fire wood., cpb-maha karanja oil, cpb-neem oil, cpb-perfume soap, cpb-perfume phenyl scent, cpb-pine oil, cpb-rosin paste, cpb-stone salt, cpb-soap colour, cpb-carbolic acid, cpb-1 litre plastic bottle, cpb-phenyl colour, cpb-sodium silicate, cpb-rosin , cpb-washing soda., cpb-hydro chloric acid., cpb-hydrosulphate of soda, cpb-raw colour, cpb-deel wood box, cpb-chloro phenyl, cpb-napthol colour, cpb-direct dyes colour, cpb-landry iron box coil , cpb-iron box socket , cpb-male female socket , cpb-charcoal, cpb-washing soda.., cpb-tin opal, cpb-robin blue, cpb-bush different size for cot and chairs, cpb-cot bush , cpb-cutter blade (hand), cpb-cutting machine spare parts, cpb-drill bit different sizes , cpb-emery paper-water proof , cpb-grinding wheel / stone , cpb-hacksaw blades different size, cpb-hinges , cpb-key plates ms all size, cpb-measuring tape , cpb-painting brush , cpb-terpent oil , cpb-n.c. thinner, , cpb-wire nails all size, cpb-hinges all size, cpb-primmer wood or metal, cpb-cr plywood, cpb-plywood sheet-19 mm, cpb-plywood sheet-6 mm, cpb-ost plywood, cpb-bee-wax, cpb-pencil, cpb-adasive for corpentry, cpb-wood polish, cpb-laminated sheet , cpb-leminated sheet, cpb-sand paper , cpb-emery/sand paper , cpb-mobile oil., cpb-planning blade , cpb-plastic can wire, cpb-abro tape , cpb-aluminium tower bolt all size, cpb-yellow amber, cpb-drawer handle all size, cpb-aluminium double channel all size , cpb-sliding glass wheel all size , cpb-drawer lock all size, cpb-bottom wheel all size

CTN :40717362

17 Jul, 2025 NA

Kalyani - West Bengal

Tender For supply of marking chalk , lighter spark for gas cutting machine , lighter spark stone

CTN :41037847

22 Jul, 2025 12.35 Crore

Begusarai - Bihar

Tender For mgsy/25-26/begusarai/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in between mathar kasimpur kurmi tola road and gupta lakhminiya rcd road under matihani block in the district of begusarai ., excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. co

CTN :41037852

22 Jul, 2025 13.59 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/02 - construction of rcc h.l. bridge in pagal chauk se kesa tola chainage 2.200 km par pul nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i. ordinary soil, i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, rcc m-30, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, rcc m-35 (using batching plant, transit mixer and concrete pump), i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the struct

CTN :41037845

22 Jul, 2025 13.50 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/01 - panchayat pipra vijayavar nuna nadi me high level rcc pul ka nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709

CTN :41037844

22 Jul, 2025 13.03 Crore

Patna - Bihar

Tender For mgsy/25-26/balia/01 - construction of h.l rcc bridge ( 8 x 21.750 m) in between t01 se sonwarsha path under shamho akha kurha block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed ceme

Gravel Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors